Rear Bumpers
Showing 33–64 of 66 results
-
Rear Bumpers
JK RockBrawler II Rear Bumper Poison Spyder – 17-62-010
JK RockBrawler II Rear Bumper for Jeep Wrangler JK 2007-2016. The Brawler Full Width Rear Bumper for JK provides the highest ground and tire clearance possible in a Full width JK rear bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their Stock JK fender flares. The bumper extends to the Full width of the Stock flares, to integrate with them cleanly while protecting them from trail hazards. This configuration includes the Single-Action spare tire carrier, high clearance recovery shackle tabs and a receiver hitch. Like all bumpers in the Brawler product line, the Full Width rear bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not yet offer a powdercoat option for this item.
Features:- Low profile faceted design for high clearance of trail obstacles; recessed back-up light buckets for 2.5 inch LED lamps (sold separately)
- CNC laser-cut, precision brake-formed 3/16 plate steel construction
- Integrated high clearance hitch receiver
- Notch/step allows clearance for spare tires on Stock or aftermarket body-mounted carriers
- Recovery shackle tabs CNC machined from 1 steel
Full Width
Finally there is a Full Width front bumper that incorporates Poison Spyder attention to form and function, in an elegant package that integrates perfectly with the Stock Jeep or aftermarket Stock replacement fender flares. While this bumper was designed for those Jeep enthusiasts who prefer a more overland style and function to their Jeep build, or want to keep their factory flares, we could Not simply make a Full-width monstrosity like so many unsightly bumpers already on the market.Even though it is Full width, and less likely to be used on the hard core rock trails, we still felt compelled to design it with maximum approach angle, ground clearance and tire clearance possible while still extending out to the Full width of the Stock flares to protect the corners of the Jeep.
The outriggers that extend to the edge of the flare are kept as tight to the original Brawler high clearance lines as possible, tapering outward toward the ends. This allows the best departure angles possible in a Full width rear bumper, minimizing the chances of hanging up as the rear tire comes off a rock or ledge. The outriggers are designed to integrate visually with the Stock fender flares, in a clean, almost factory look.
Bumper Plate Steel Construction
Every Brawler bumper starts out as a sheet of 3/16 inch plate steel. Our CNC laser cutter precisely cuts the flat pattern as designed in our 3D CAD system. Next the bumper parts are CNC brake-formed into the high clearance, multi-faceted pieces that will become a finished bumper. Highly skilled tradesmen weld each bumper together using precision-engineered assembly fixtures for a perfect fit. Finally the complete bumper is sent through our finishing department for final appearance surfacing and quality control checks.
Single-Action Spare Tire Carrier
The Spare Tire Carrier Single-Action-Opening feature is a huge convenience for when you are trying to open the tailgate and tire carrier with one hand, when you have got an armload of gear or groceries in the other. Rather than latching to itself, the tire carrier is tethered to the tailgate so that they open and close in tandem. A custom designed tie-rod assembly, bumper mechanism and Tramp Stamp keep the two pieces perfectly aligned when open, but tight and rattle-free when closed.
Tire Carrier Plate Steel Construction
The RockBrawler II Spare Tire Carrier is fabricated entirely from CNC laser cut, precision brake-formed plate steel. The pieces are expertly welded together in a specially designed assembly fixture to ensure consistent fit and quality. A web gusset design is cut into the corner of the tire carrier to provide a little Poison Spyder flare.
Extreme Duty Hinge Assembly
The extreme duty hinge assembly includes a precision CNC machined spindle and housing, with a pair of high quality Timken tapered roller bearings to provide smooth operation under the heaviest loads A spindle seal at the bottom of the hinge assembly keeps your lubrication in, and dirt and water out. The hinge assembly is capped with a CNC machined billet aluminum cap with the Spyder emblem machined in.
2-Way Adjustable Tire Mount
The tire mount is adjustable up and down, as well as in and out, to accommodate a wide variety of tire sizes up to 39 inches. The adjust-ability allows the tire to be mounted as low as possible for any tire size, to keep a low center of gravity.
License Plate Relocation Mount
The included license plate mount places the license plate at the center of the spare tire, for those who choose to move it there. Unlike the original RockBrawler rear bumper, the RockBrawler II Rear Bumper with Tire Carrier does Not obstruct the placement of the Stock license plate frame, so the installer may choose to leave it in the Stock location or move it to the center of the rear tire using the included bracket. We recommend relocating it, as the Stock mount sticks out significantly from the side of the Jeep and is just begging to be torn off by a rock along the trail. If relocating the license plate, our License Plate Delete Cover (p/n 17-04-112) and LED License Plate & 3rd Brake Light (p/n 41-04-LP6) will be useful in completing the relocation.
Integrated Hitch Receiver
The integrated hitch receiver accepts Standard 2 inch hitches and recovery accessories. It is built in to the structure of the Brawler Full Width Rear Bumper in order to provide a higher clearance, tougher hitch that is there when you need it, but tucked up higher out of the way for better clearance and departure angles on the trail. Includes integrated safety chain loops.Important: The integrated hitch receiver is Not rated for towing. It is intended as a recovery attachment point only.
Rock Solid Mounting
The JK Brawler Full Width Rear Bumper incorporates an extra set of mounting bolts, along the bottom of the bumper which fasten into the rear crossmember. Combined with the mounting flange bolts at either side, the bumper is rigidly fastened by a total of 8 Grade 8 bolts, on three different planes to provide ultimate strength and rigidity to the mounted bumper. The drivers side floating flange allows for safe, secure tightening to the Jeep frame rails regardless of manufacturing variances from the Jeep factory.
Recovery Shackle Tabs
The Heavy Duty Recovery Shackle Tabs are CNC machined from 1 inch thick steel billet, specifically designed to accept our Heavy Duty 3/4 inch Recovery Shackles. These tabs are designed to match the high clearance aspects of the rest of the bumper and minimized hang-ups. These Heavy Duty Recovery Shackle Tabs come as Standard equipment on the Brawler Full Width Rear Bumper.
Optional Hi-Lift Jack Mount
A custom Hi-Lift Jack Mount (p/n 45-61-011), available separately, is CNC laster cut and bolts to the top of the tire carrier. It features a distinctive web design to match the corner gusset detail on the RockBrawler II Tire Carrier, and mounts the Hi-Lift jack above and forward of the spare tire to keep it tucked up and away until needed.SKU: 17-62-010-PSC -
Rear Bumpers
JK RockBrawler II Rear Bumper Tire Carrier Black Poison Spyder – 17-62-020P1
JK RockBrawler II Rear Bumper Tire Carrier Black for Jeep Wrangler JK 2007-2016. The Brawler Full Width Rear Bumper for JK provides the highest ground and tire clearance possible in a Full width JK rear bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their Stock JK fender flares. The bumper extends to the Full width of the Stock flares, to integrate with them cleanly while protecting them from trail hazards. This configuration includes the Single-Action spare tire carrier, high clearance recovery shackle tabs and a receiver hitch. Like all bumpers in the Brawler product line, the Full Width rear bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not yet offer a powdercoat option for this item.
Features:- SpyderShell Armor Coat finish with 5-Year Warranty
- Single action spare tire carrier opens with tailgate; heavy duty spindle/hinge, latch and 3-way adjustable tire mount
- Low profile faceted design for high clearance of trail obstacles; recessed back-up light buckets for 2.5 inch LED lamps (sold separately)
- CNC laser-cut, precision brake-formed 3/16 plate steel construction
- Integrated high clearance hitch receiver
Full Width
Finally there is a Full Width front bumper that incorporates Poison Spyder attention to form and function, in an elegant package that integrates perfectly with the Stock Jeep or aftermarket Stock replacement fender flares. While this bumper was designed for those Jeep enthusiasts who prefer a more overland style and function to their Jeep build, or want to keep their factory flares, we could Not simply make a Full-width monstrosity like so many unsightly bumpers already on the market.Even though it is Full width, and less likely to be used on the hard core rock trails, we still felt compelled to design it with maximum approach angle, ground clearance and tire clearance possible while still extending out to the Full width of the Stock flares to protect the corners of the Jeep.
The outriggers that extend to the edge of the flare are kept as tight to the original Brawlers high clearance lines as possible, tapering outward toward the ends. This allows the best departure angles possible in a Full width rear bumper, minimizing the chances of hanging up as the rear tire comes off a rock or ledge. The outriggers are designed to integrate visually with the Stock fender flares, in a clean, almost factory look.
Bumper Plate Steel Construction
Every Brawler bumper starts out as a sheet of 3/16 inch plate steel. Our CNC laser cutter precisely cuts the flat pattern as designed in our 3D CAD system. Next the bumper parts are CNC brake-formed into the high clearance, multi-faceted pieces that will become a finished bumper. Highly skilled tradesmen weld each bumper together using precision-engineered assembly fixtures for a perfect fit. Finally the complete bumper is sent through our finishing department for final appearance surfacing and quality control checks.
Single-Action Spare Tire Carrier
The Spare Tire Carrier Single-Action-Opening feature is a huge convenience for when you are trying to open the tailgate and tire carrier with one hand, when you have got an armload of gear or groceries in the other. Rather than latching to itself, the tire carrier is tethered to the tailgate so that they open and close in tandem. A custom designed tie-rod assembly, bumper mechanism and Tramp Stamp keep the two pieces perfectly aligned when open, but tight and rattle-free when closed.
Tire Carrier Plate Steel Construction
The RockBrawler II Spare Tire Carrier is fabricated entirely from CNC laser cut, precision brake-formed plate steel. The pieces are expertly welded together in a specially designed assembly fixture to ensure consistent fit and quality. A web gusset design is cut into the corner of the tire carrier to provide a little Poison Spyder flare.
Extreme Duty Hinge Assembly
The extreme duty hinge assembly includes a precision CNC machined spindle and housing, with a pair of high quality Timken tapered roller bearings to provide smooth operation under the heaviest loads A spindle seal at the bottom of the hinge assembly keeps your lubrication in, and dirt and water out. The hinge assembly is capped with a CNC machined billet aluminum cap with the Spyder emblem machined in.
2-Way Adjustable Tire Mount
The tire mount is adjustable up and down, as well as in and out, to accommodate a wide variety of tire sizes up to 39 inches. The adjust-ability allows the tire to be mounted as low as possible for any tire size, to keep a low center of gravity.
License Plate Relocation Mount
The included license plate mount places the license plate at the center of the spare tire, for those who choose to move it there. Unlike the original RockBrawler rear bumper, the RockBrawler II Rear Bumper with Tire Carrier does Not obstruct the placement of the Stock license plate frame, so the installer may choose to leave it in the Stock location or move it to the center of the rear tire using the included bracket. We recommend relocating it, as the Stock mount sticks out significantly from the side of the Jeep and is just begging to be torn off by a rock along the trail. If relocating the license plate, our License Plate Delete Cover (p/n 17-04-112) and LED License Plate and 3rd Brake Light (p/n 41-04-LP6) will be useful in completing the relocation.
Integrated Hitch Receiver
The integrated hitch receiver accepts Standard 2 inch hitches and recovery accessories. It is built in to the structure of the Brawler Full Width Rear Bumper in order to provide a higher clearance, tougher hitch that’s there when you need it, but tucked up higher out of the way for better clearance and departure angles on the trail. Includes integrated safety chain loops.Important: The integrated hitch receiver is Not rated for towing. It is intended as a recovery attachment point only.
Rock Solid Mounting
The JK Brawler Full Width Rear Bumper incorporates an extra set of mounting bolts, along the bottom of the bumper which fasten into the rear crossmember. Combined with the mounting flange bolts at either side, the bumper is rigidly fastened by a total of 8 Grade 8 bolts, on three different planes to provide ultimate strength and rigidity to the mounted bumper. The drivers side floating flange allows for safe, secure tightening to the Jeep frame rails regardless of manufacturing variances from the Jeep factory.
Recovery Shackle Tabs
The Heavy Duty Recovery Shackle Tabs are CNC machined from 1 inch thick steel billet, specifically designed to accept our Heavy Duty 3/4 inch Recovery Shackles. These tabs are designed to match the high clearance aspects of the rest of the bumper and minimized hang-ups. These Heavy Duty Recovery Shackle Tabs come as Standard equipment on the Brawler Full Width Rear Bumper.
Optional Hi-Lift Jack Mount
A custom Hi-Lift Jack Mount (p/n 45-61-011), available separately, is CNC laster cut and bolts to the top of the tire carrier. It features a distinctive web design to match the corner gusset detail on the RockBrawler II Tire Carrier, and mounts the Hi-Lift jack above and forward of the spare tire to keep it tucked up and away until needed.SKU: 17-62-020P1-PSC -
Rear Bumpers
JK RockBrawler II Rear Bumper Tire Carrier Poison Spyder – 17-62-020
JK RockBrawler II Rear Bumper Tire Carrier for Jeep Wrangler JK 2007-2016. The Brawler Full Width Rear Bumper for JK provides the highest ground and tire clearance possible in a Full width JK rear bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their Stock JK fender flares. The bumper extends to the Full width of the Stock flares, to integrate with them cleanly while protecting them from trail hazards. This configuration includes the Single-Action spare tire carrier, high clearance recovery shackle tabs and a receiver hitch. Like all bumpers in the Brawler product line, the Full Width rear bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not yet offer a powdercoat option for this item.
Features:- Single action spare tire carrier opens with tailgate; heavy duty spindle/hinge, latch and 3-way adjustable tire mount
- Low profile faceted design for high clearance of trail obstacles; recessed back-up light buckets for 2.5 inch LED lamps (sold separately)
- CNC laser-cut, precision brake-formed 3/16 plate steel construction
- Integrated high clearance hitch receiver
- Recovery shackle tabs CNC machined from 1 steel
Full Width
Finally there is a Full Width front bumper that incorporates Poison Spyder attention to form and function, in an elegant package that integrates perfectly with the Stock Jeep or aftermarket Stock replacement fender flares. While this bumper was designed for those Jeep enthusiasts who prefer a more overland style and function to their Jeep build, or want to keep their factory flares, we could Not simply make a Full-width monstrosity like so many unsightly bumpers already on the market.Even though it is Full width, and less likely to be used on the hard core rock trails, we still felt compelled to design it with maximum approach angle, ground clearance and tire clearance possible while still extending out to the Full width of the Stock flares to protect the corners of the Jeep.
The outriggers that extend to the edge of the flare are kept as tight to the original Brawler high clearance lines as possible, tapering outward toward the ends. This allows the best departure angles possible in a Full width rear bumper, minimizing the chances of hanging up as the rear tire comes off a rock or ledge. The outriggers are designed to integrate visually with the Stock fender flares, in a clean, almost factory look.
Bumper Plate Steel Construction
Every Brawler bumper starts out as a sheet of 3/16 inch plate steel. Our CNC laser cutter precisely cuts the flat pattern as designed in our 3D CAD system. Next the bumper parts are CNC brake-formed into the high clearance, multi-faceted pieces that will become a finished bumper. Highly skilled tradesmen weld each bumper together using precision-engineered assembly fixtures for a perfect fit. Finally the complete bumper is sent through our finishing department for final appearance surfacing and quality control checks.
Single-Action Spare Tire Carrier
The Spare Tire Carrier Single-Action-Opening feature is a huge convenience for when you are trying to open the tailgate and tire carrier with one hand, when you’ve got an armload of gear or groceries in the other. Rather than latching to itself, the tire carrier is tethered to the tailgate so that they open and close in tandem. A custom designed tie-rod assembly, bumper mechanism and Tramp Stamp keep the two pieces perfectly aligned when open, but tight and rattle-free when closed.
Tire Carrier Plate Steel Construction
The RockBrawler II Spare Tire Carrier is fabricated entirely from CNC laser cut, precision brake-formed plate steel. The pieces are expertly welded together in a specially designed assembly fixture to ensure consistent fit and quality. A web gusset design is cut into the corner of the tire carrier to provide a little Poison Spyder flare.
Extreme Duty Hinge Assembly
The extreme duty hinge assembly includes a precision CNC machined spindle and housing, with a pair of high quality Timken tapered roller bearings to provide smooth operation under the heaviest loads A spindle seal at the bottom of the hinge assembly keeps your lubrication in, and dirt and water out. The hinge assembly is capped with a CNC machined billet aluminum cap with the Spyder emblem machined in.
2-Way Adjustable Tire Mount
The tire mount is adjustable up and down, as well as in and out, to accommodate a wide variety of tire sizes up to 39 inches. The adjust-ability allows the tire to be mounted as low as possible for any tire size, to keep a low center of gravity.
License Plate Relocation Mount
The included license plate mount places the license plate at the center of the spare tire, for those who choose to move it there. Unlike the original RockBrawler rear bumper, the RockBrawler II Rear Bumper with Tire Carrier does Not obstruct the placement of the Stock license plate frame, so the installer may choose to leave it in the Stock location or move it to the center of the rear tire using the included bracket. We recommend relocating it, as the Stock mount sticks out significantly from the side of the Jeep and is just begging to be torn off by a rock along the trail. If relocating the license plate, our License Plate Delete Cover (p/n 17-04-112) and LED License Plate and 3rd Brake Light (p/n 41-04-LP6) will be useful in completing the relocation.
Integrated Hitch Receiver
The integrated hitch receiver accepts Standard 2 inch hitches and recovery accessories. It is built in to the structure of the Brawler Full Width Rear Bumper in order to provide a higher clearance, tougher hitch that is there when you need it, but tucked up higher out of the way for better clearance and departure angles on the trail. Includes integrated safety chain loops.Important: The integrated hitch receiver is Not rated for towing. It is intended as a recovery attachment point only.
Rock Solid Mounting
The JK Brawler Full Width Rear Bumper incorporates an extra set of mounting bolts, along the bottom of the bumper which fasten into the rear crossmember. Combined with the mounting flange bolts at either side, the bumper is rigidly fastened by a total of 8 Grade 8 bolts, on three different planes to provide ultimate strength and rigidity to the mounted bumper. The drivers side floating flange allows for safe, secure tightening to the Jeep frame rails regardless of manufacturing variances from the Jeep factory.
Recovery Shackle Tabs
The Heavy Duty Recovery Shackle Tabs are CNC machined from 1 inch thick steel billet, specifically designed to accept our Heavy Duty 3/4 inch Recovery Shackles. These tabs are designed to match the high clearance aspects of the rest of the bumper and minimized hang-ups. These Heavy Duty Recovery Shackle Tabs come as Standard equipment on the Brawler Full Width Rear Bumper.
Optional Hi-Lift Jack Mount
A custom Hi-Lift Jack Mount (p/n 45-61-011), available separately, is CNC laster cut and bolts to the top of the tire carrier. It features a distinctive web design to match the corner gusset detail on the RockBrawler II Tire Carrier, and mounts the Hi-Lift jack above and forward of the spare tire to keep it tucked up and away until needed.SKU: 17-62-020-PSC -
Rear Bumpers
JK RockBrawler Rear Bumper Poison Spyder – 17-61-010
JK RockBrawler Rear Bumper for Jeep Wrangler JK 2007-2016.
Features:- Low profile faceted design for high clearance of trail obstacles; recessed back-up light buckets for 2.5 inch LED lamps (sold separately)
- CNC laser-cut, precision brake-formed 3/16 plate steel construction
- Allows use of the factory or aftermarket tow hitch
- Notch/step allows clearance for spare tires on Stock or aftermarket body-mounted carriers
Multi-Faceted Design
The RockBrawler Rear Bumpers high clearance, multi-faceted design provides the best possible departure angles and corner obstacle clearance. Its appearance is streamlined and sexy, Not like the squarish, boxy shape of many other bumpers on the market. The RockBrawler is constructed of CNC laser cut, brake-formed 3/16 inch plate steel. The multiple bends and facets actually lend even more strength to the bumper design.Unlike the Poison Spyder BFH Rear Bumper for JK, the RockBrawler Rear Bumper can be mounted without cutting or altering the Jeep frame rails.
Recessed Back-Up Lamps
Very few JK rear bumpers come with provisions for mounting backup lamps. Of those that do, fewer still allow the use of high intensity, low power drawing LED lamps. The RockBrawler Rear Bumper recessed light buckets accept 2.5 inch Round, Clear LED Lamps, the same backup lamps we have sold with our Crusher Corners.The recessed buckets protect them from the rocks and direct light rearward rather than into the bumper interior, the way some competitor bracket-mounted lamps do. Customers may choose to wire them into the reverse light circuit, or wire them to a separate dash switch as a loading or utility light. Important: Note that the LED Lamps do Not come with this bumper, they must be purchased separately.
Works with Existing Equipment
The RockBrawler Rear Bumper is designed to work with your existing OE tow hitch. Unlike the integrated hitches found on competitor’s bumpers, the OE hitch is designed for and safely rated for towing. And best of all, its easily removable. So those who need a sturdy hitch for towing can still use the Stock one, while those who need the extra clearance for hard core off-roading can easily remove it.The RockBrawler Rear Bumper has a built-in step/recess to provide easy access to the rear of the Jeep as well as clearance for the spare tire. This bumper may be used with the Stock spare tire carrier and up to a 35 inch tire. For those looking for a complete bumper/tire carrier system, check out the RockBrawler Rear Bumper with Tire Carrier.
Rock Solid Mounting
The JK RockBrawler Rear Bumper incorporates an extra set of mounting bolts, along the bottom of the bumper which fasten into the rear crossmember. Combined with the mounting flange bolts at either side, the bumper is rigidly fastened by a total of 8 Grade 8 bolts, on three different planes to provide ultimate strength and rigidity to the mounted bumper.
Recovery Shackle Tabs
The optional Heavy Duty Recovery Shackle Tabs are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles.These tabs are designed to match the high clearance aspects of the rest of the bumper and minimized hang-ups. Selecting this option will get you a pair of these tabs, expertly welded to the RockBrawler Rear Bumper.
This product ships as bare steel. It will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.SKU: 17-61-010-PSC -
Rear Bumpers
JK RockBrawler Rear Bumper Tabs Poison Spyder – 17-61-010-D
JK RockBrawler Rear Bumper Tabs for Jeep Wrangler JK 2007-2016.
Features:- Low profile faceted design for high clearance of trail obstacles; recessed back-up light buckets for 2.5 inch LED lamps (sold separately)
- CNC laser-cut, precision brake-formed 3/16 plate steel construction
- Allows use of the factory or aftermarket tow hitch
- Notch/step allows clearance for spare tires on Stock or aftermarket body-mounted carriers
- Recovery shackle tabs CNC machined from 1 steel
Multi-Faceted Design
The RockBrawler Rear Bumper high clearance, multi-faceted design provides the best possible departure angles and corner obstacle clearance. Its appearance is streamlined and sexy, Not like the squarish, boxy shape of many other bumpers on the market. The RockBrawler is constructed of CNC laser cut, brake-formed 3/16 inch plate steel. The multiple bends and facets actually lend even more strength to the bumper design.Unlike the Poison Spyder BFH Rear Bumper for JK, the RockBrawler Rear Bumper can be mounted without cutting or altering the Jeep frame rails.
Recessed Back-Up Lamps
Very few JK rear bumpers come with provisions for mounting backup lamps. Of those that do, fewer still allow the use of high intensity, low power drawing LED lamps. The RockBrawler Rear Bumper recessed light buckets accept 2.5 inch Round, Clear LED Lamps, the same backup lamps we have sold with our Crusher Corners.The recessed buckets protect them from the rocks and direct light rearward rather than into the bumper interior, the way some competitor bracket-mounted lamps do. Customers may choose to wire them into the reverse light circuit, or wire them to a separate dash switch as a loading or utility light. Important: Note that the LED Lamps do Not come with this bumper, they must be purchased separately.
Works with Existing Equipment
The RockBrawler Rear Bumper is designed to work with your existing OE tow hitch. Unlike the integrated hitches found on competitor bumpers, the OE hitch is designed for and safely rated for towing. And best of all, its easily removable. So those who need a sturdy hitch for towing can still use the Stock one, while those who need the extra clearance for hard core off-roading can easily remove it.The RockBrawler Rear Bumper has a built-in step/recess to provide easy access to the rear of the Jeep as well as clearance for the spare tire. This bumper may be used with the Stock spare tire carrier and up to a 35 inch tire. For those looking for a complete bumper/tire carrier system, check out the RockBrawler Rear Bumper with Tire Carrier.
Rock Solid Mounting
The JK RockBrawler Rear Bumper incorporates an extra set of mounting bolts, along the bottom of the bumper which fasten into the rear crossmember. Combined with the mounting flange bolts at either side, the bumper is rigidly fastened by a total of 8 Grade 8 bolts, on three different planes to provide ultimate strength and rigidity to the mounted bumper.
Recovery Shackle Tabs
The optional Heavy Duty Recovery Shackle Tabs are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles.These tabs are designed to match the high clearance aspects of the rest of the bumper and minimized hang-ups. Selecting this option will get you a pair of these tabs, expertly welded to the RockBrawler Rear Bumper.
This product ships as bare steel. It will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.SKU: 17-61-010-D-PSC -
Rear Bumpers
RockBrawler Hi-Lift Jack Mount Poison Spyder – 45-61-010
RockBrawler Hi-Lift Jack Mount for Jeep Wrangler JK 2007-2016. This accessory makes it easy to mount a Hi-Lift jack to your Poison Spyder RockBrawler Rear Bumper with Tire Carrier. The mount plate is CNC laser cut from 3/16 inch plate steel, with an unmistakable Spyder web design. The plate bolts to the top of the tire carrier using the supplied Grade 8 hardware.
Your Hi-Lift jack attaches to the mount plate with a pair of heavy duty 1/2 inch carriage bolts with urethane isolator bushings. We provide both wing nuts and nylock nuts so you can choose which to use to fasten your Jack to the mount. The RockBrawler Hi-Lift Jack Mount comes bare steel so you may paint or powdercoat in the color of your choice.
Important: This product is designed for use with the RockBrawler Rear Bumper with Tire Carrier. If you have a RockBrawler II Rear Bumper with Tire Carrier, you need our Rock Brawler II Hi-Lift Jack Mount instead.
Features:- CNC laser cut 3/16 plate steel
- Provides easy, convenient mounting of a Hi-Lift jack on to a RockBrawler Rear Bumper Tire Carrier
- Hardware and install instructions included. Bare steel (requires paint or powdercoat)
- Designed specifically for RockBrawler Tire Carriers
SKU: 45-61-010-PSC -
Rear Bumpers
Rough Coutry Full-Width Rock Crawler Rear Bumper w/ Tire Carrier, Hitch & D-Rings 110503
Rear BumpersRough Coutry Full-Width Rock Crawler Rear Bumper w/ Tire Carrier, Hitch & D-Rings 110503
Beef up your JKs rear end with Rough Countrys Heavy-Duty JK Rear Bumper with Tire Carrier! This stylish, durable steel bumper offers unbridled protection for the rear of your JK while giving you increased tire clearance for off-road articulation. With bold angles and contoured curves, this rear bumper is a true head-turner thats sure to get attention.
Rough Countrys Full-Width Rear Bumper features a 5/32-inch steel composition for serious durability and comes coated in a corrosion-resistant, textured black powdercoat to withstand the elements. Features a set of D-rings for easy winching or recovery in off-road environments.
Rough Country’s Full-Width Rock Crawler Rear Bumper w/ Tire Carrier, Hitch & D-Rings – 110503
SKU: 110503 -
Rear Bumpers
Rough Coutry Jeep Rock Crawler Rear HD Bumper (07-18 Wrangler JK) 10528
Beef up your JK’s rear end with Rough Country’s Heavy-Duty JK Rear Bumper with Tire Carrier! This stylish, durable steel bumper offers unbridled protection for the rear of your JK while giving you increased tire clearance for off-road articulation. With bold angles and contoured curves, this rear bumper is a true head-turner that’s sure to get attention.Rough Country’s Rear Bumper features a 5/32″ steel composition for serious durability and comes coated in a corrosion-resistant, textured black powdercoat to withstand the elements. Features a set of D-rings for easy winching or recovery in off-road environments.
SKU: 10528 -
Rear Bumpers
Rough Coutry Jeep Rock Crawler Rear HD Bumper (07-18 Wrangler JK) 10593
Beef up your JK’s rear end with Rough Country’s Heavy-Duty JK Rear Bumper with Tire Carrier! This stylish, durable steel bumper offers unbridled protection for the rear of your JK while giving you increased tire clearance for off-road articulation. With bold angles and contoured curves, this rear bumper is a true head-turner that’s sure to get attention.Rough Country’s Rear Bumper features a 5/32″ steel composition for serious durability and comes coated in a corrosion-resistant, textured black powdercoat to withstand the elements. Features a set of D-rings for easy winching or recovery in off-road environments.
SKU: 10593 -
Rear Bumpers
SRC Classic Rear Bumper 76-06 Wrangler CJ/YJ/TJ/LJ W/ D-Rings Hitch Tire Carrier Black Textured Smittybilt – 76651D
Rear BumpersSRC Classic Rear Bumper 76-06 Wrangler CJ/YJ/TJ/LJ W/ D-Rings Hitch Tire Carrier Black Textured Smittybilt – 76651D
The perfect add-on to your Jeep when you have over sized tires. Original Jeep tailgates are unable to support the weight of an over sized tire- especially when you are off road. This bumper mount tire carrier takes the load off the tailgate and puts it on the frame mounted bumper. Each tire carrier incorporates grease fitting to keep the hinge mechanism running smooth.
Constructed of the finest materials and Zinc under coated, Dual Stage durable powder coat painted, this heavy-duty off road design is built to last. Will hold up to 35 Inch tire. Available in Textured Black only.
Details:- Fits 1987 to 2006 Wrangler, Rubicon and Unlimited
- Fits 1976 to 1986 CJ7 with tire adapter part number S/B3721
- 2-stage textured black powder coat
- E-coat undercoated
- Heavy-duty 1/4 Inch steel plate design
- Three point mounting system supports over-sized tires
- Special lock design keeps tire carrier secure while off-roading
- 5 year limited warranty
SKU: n/a -
Rear Bumpers
SRC Classic Rock Crawler Rear Bumper 87-06 Wrangler CJ/YJ/TJ/LJ Black Smittybilt – 76651D-01
Rear BumpersSRC Classic Rock Crawler Rear Bumper 87-06 Wrangler CJ/YJ/TJ/LJ Black Smittybilt – 76651D-01
The Smittybilt Classic SRV Rear Bumper is as tough as it is practical, as is seen in the 1/4 Inch steel plate design, intuitive mounting system to carry an over sized spare tire. The SRC Classic rear bumper is powder coated in our signature textured finish. Zinc Undercoated Dual Stage Textured Powder coat for long life. Heavy Duty 1/4 Inch steel plate design. Available with InchD Inch Rings!
Details:- Fits 1987 to 2006 Wrangler, Rubicon and Unlimited
- SRC Classic Rock Crawler Rear Bumper
- Black Textured
- With D Ring
- No Drill Installation
- Order S/B76651-02 for tire carrier
- 5 year limited warranty
SKU: n/a -
Rear Bumpers
SRC Gen2 Rear Bumper 07-18 Wrangler JK Smittybilt – 76614
Smittybilts all new SRC Gen 2 bumpers are engineered to provide the maximum protection without sacrificing the ability to go anywhere off road. Each SRC bumper features 3/16 Inch steel construction, solid plate center sections that wrap and protects the frame horns and lower cross members, providing the ultimate protection when off roading. Each rear bumper features a class III, 2 Inch receiver hitch that is incorporated into the bumper and bolts directly up to your factory mounting points. Includes two D-ring mounts for those sticky situations.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two-stage textured matte black finish
- New solid d-ring and jack point mount – Welded on the inside and out
- Fender to fender protection
- Aggressive design for with raised corners for better entry and exit angles
- Aux back up light cut out provided/lights included
- Manufactured from 3/16-inch cold rolled steel
- Towable d-ring mounts
- Two-Stage Textured Matte Black Finish
- Smittybilt Limited Lifetime Warranty
- Modular design – Tire Carrier can be added in the future (S/B76857).
- Class III hitch for true towing
- Anti-rattle provision provided for receiver hitch
SKU: n/a -
Rear Bumpers
SRC Rear Bumper w/ 2 Inch Hitch Receiver 07-15 Wrangler JK Black Smittybilt – 76612
The SRC Rear Bumpers feature a 3/16-inch solid plate center section to contour around an oversized tire and give you maximum tire clearance when opening and closing your tailgate. Each SRC Rear Bumper also features a 2-inch receiver that is incorporated in the bumper, two D-Ring mounts, and bolts directly up to your OE points.
- SRC Rear Bumper JK
- 3/16 Inch Solid plate center section designed to contour around an oversized tire to give you the maximum tire clearance when opening and closing your tailgate
- Each rear bumper features a 2 inch receiver hitch that is incorporated into the bumper and bolts directly up to your OE Points plus the two D-Ring mounts!
- Class III hitch for true towing with towable D-ring mounts
- Matte Black Powdercoat Finish
- 5 Year Limited Warranty On Finish
- Lifetime Limited Warranty On Structure
- Sold As Each
Fits:
- 2007-2015 Jeep JK Wrangler
- 2007-2015 Jeep JK Wrangler Unlimited
SKU: n/a -
Rear Bumpers
SRC Rear Bumper w/ 2 Inch Hitch Receiver and Tire Carrier 07-15 Wrangler JK Black Smittybilt – 76622
Rear BumpersSRC Rear Bumper w/ 2 Inch Hitch Receiver and Tire Carrier 07-15 Wrangler JK Black Smittybilt – 76622
The SRC Rear Bumpers feature a 3/16-inch solid plate center section to contour around an oversized tire and give you maximum tire clearance when opening and closing your tailgate. Each SRC Rear Bumper also features a 2-inch receiver that is incorporated in the bumper, two D-Ring mounts, and bolts directly up to your OE points. This model includes our Spare Tire Carrier as well!
- SRC Rear Bumper w/ Spare Tire Carrier JK
- 3/16 Inch Solid plate center section designed to contour around an oversized tire to give you the maximum tire clearance when opening and closing your tailgate
- Each rear bumper features a 2 inch receiver hitch that is incorporated into the bumper and bolts directly up to your OE Points plus the two D-Ring mounts!
- Class III hitch for true towing with towable D-ring mounts
- Heavy Duty Tire Carrier
- Matte Black Powdercoat Finish
- 5 Year Limited Warranty On Finish
- Lifetime Limited Warranty On Structure
- Sold As Each
Fits:
- 2007-2015 Jeep JK Wrangler
- 2007-2015 Jeep JK Wrangler Unlimited
SKU: n/a -
Rear Bumpers
SRC Rear Bumper W/Hitch 87-06 Wrangler YJ/TJ/LJ Black Textured Smittybilt – 76611
Constructed of the finest materials and dual stage powder coat painted, this heavy duty off road design is built to last! Each unit includes a 2 Inch receiver.
Details:- Fits 1987 to 2006 Wrangler, Rubicon and Unlimited
- Black powder coat
- Dense zinc treated undercoating
- Two stage Textured black powder coat finish
- Expertly robotically welded
- Bumpers bolt directly to your vehicle
- Bumper is 2 Inchx.120 Inch wall
- 2 Inch receiver rated Class III 9,000 lbs.
SKU: n/a -
Rear Bumpers
Tubular Bumper Rear 07-18 Wrangler JK W/O Hitch Black Textured Smittybilt – JB48-RT
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Textured black
- One-piece design
- Robotically welded for extreme durability
- Pre-cut vertical uprights for a signature look
- No hitch
- 5 year limited warranty
SKU: n/a -
Rear Bumpers
Tubular Bumper Rear 07-18 Wrangler JK W/O Hitch Gloss Black Smittybilt – JB48-R
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Gloss Black
- One-piece design
- Robotically welded for extreme durability
- Pre-cut vertical uprights for a signature look
- No hitch
- 5 year limited warranty
SKU: n/a -
Rear Bumpers
Tubular Bumper Rear 07-18 Wrangler JK W/O Hitch Stainless Steel Smittybilt – JB48-RS
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Stainless Steel
- One-piece design
- Robotically welded for extreme durability
- Pre-cut vertical uprights for a signature look
- No hitch
- 5 year limited warranty
SKU: n/a -
Rear Bumpers
Tubular Bumper Rear 87-06 Wrangler YJ/TJ/LJ W/O Hitch Black Textured Smittybilt – JB44-RT
Rear BumpersTubular Bumper Rear 87-06 Wrangler YJ/TJ/LJ W/O Hitch Black Textured Smittybilt – JB44-RT
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight.
Details:- Fits 1987 to 2006 Wrangler, Rubicon and Unlimited
- Textured black
- One-piece design
- Robotically welded for extreme durability
- Pre-cut vertical uprights for a signature look
- No hitch
- 5 year limited warranty
SKU: n/a -
Rear Bumpers
Tubular Bumper Rear 87-06 Wrangler YJ/TJ/LJ W/O Hitch Gloss Black Smittybilt – JB44-R
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight.
Details:- Fits 1987 to 2006 Wrangler, Rubicon and Unlimited
- Gloss Black
- One-piece design
- Robotically welded for extreme durability
- Pre-cut vertical uprights for a signature look
- No hitch
- 5 year limited warranty
SKU: n/a -
Rear Bumpers
Tubular Bumper Rear 87-06 Wrangler YJ/TJ/LJ W/O Hitch Stainless Steel Smittybilt – JB44-RS
Rear BumpersTubular Bumper Rear 87-06 Wrangler YJ/TJ/LJ W/O Hitch Stainless Steel Smittybilt – JB44-RS
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight.
Details:- Fits 1987 to 2006 Wrangler, Rubicon and Unlimited
- Stainless Steel
- One-piece design
- Robotically welded for extreme durability
- Pre-cut vertical uprights for a signature look
- No hitch
- 5 year limited warranty
SKU: n/a -
Rear Bumpers
Tubular Bumper Rear W/Hitch 07-18 Wrangler JK Black Textured Smittybilt – JB48-RHT
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Textured black
- Dense zinc treated undercoating
- Expertly robotically welded
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- Hitch has 2,000 lb. tow weight
- 5 year limited warranty
SKU: n/a -
Rear Bumpers
Tubular Bumper Rear W/Hitch 07-18 Wrangler JK Gloss Black Smittybilt – JB48-RH
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight.
Details:- Fits 1987 to 2006 Wrangler, Rubicon and Unlimited
- Matte black powder coat
- Includes a class 2.5 receiver hitch that accepts many popular 2 Inch hitch mount accessories
- Do not exceed vehicle manufacturer Foots recommended towing capacity
- Attachment points for D-rings
- No-drill installation
SKU: n/a -
Rear Bumpers
Tubular Bumper Rear W/Hitch 07-18 Wrangler JK Stainless Steel Smittybilt – JB48-RHS
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight.
Details:- Fits 2007 to 2018 Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Stainless Steel
- One-piece design
- Robotically welded for extreme durability
- Pre-cut vertical uprights for a signature look
- Includes hitch
- 5 year limited warranty
SKU: n/a -
Gas Can Mount
Universal Gas Can Carrier Smittybilt – D8007
Constructed from 100 percent durable Neoprene and Codura materials for long life and the ultimate in protection. Center section is padded and pleated for comfort and seat protection. The front covers include a rear map pocket on them and they are easy to install with no tools required. Available in Black/Black, Black/Gray, Black/Tan and Black/Red. Seat covers are machine washable in gentle cold and hang to dry.
Details:- Fits 2008-2012 Wrangler JK
- 4-door models
- Purchase a pair of neoprene front seat covers and receive the matching neoprene rear seat covers for free
- Kit includes front and rear covers
- Black/Charcoal
- 100 percent neoprene
- Center section is padded and pleated for comfort
- Slip on installation no tools required
SKU: n/a -
Gas Can Mount
Universal Gas Can Mount Smittybilt – 2740-04
Constructed from 100 percent durable Neoprene and Codura materials for long life and the ultimate in protection. Center section is padded and pleated for comfort and seat protection. The front covers include a rear map pocket on them and they are easy to install with no tools required. Available in Black/Black, Black/Gray, Black/Tan and Black/Red. Seat covers are machine washable in gentle cold and hang to dry.
Details:- Fits 2008-2012 Wrangler JK
- 4-door models
- Purchase a pair of neoprene front seat covers and receive the matching neoprene rear seat covers for free
- Kit includes front and rear covers
- Black/Red
- 100 percent neoprene
- Center section is padded and pleated for comfort
- Slip on installation no tools required
SKU: n/a -
Rear Bumpers
XRC Atlas Rear Bumper Only 07-18 Wrangler JK Black Smittybilt – 76896-01
The Smittybilt XRC Atlas rear bumper has gone through extensive design and testing to meet stringent international pedestrian safety standards. As a result, the bumper is stylishly chiseled as well as being extremely strong and functional.
Details:- Fits 2007 to 2018 Wrangler and Unlimited
- Black powder coat
- XRC Atlas
- Rear Bumper
- Hitch
- Rear Bumper ONLY
- Tire carrier not included
SKU: n/a -
Rear Bumpers
XRC Atlas Rear Bumper with Tire Carrier 07-18 Wrangler JK Smittybilt – 76896
The Smittybilt XRC Atlas rear bumper have gone through extensive design and testing to meet stringent international pedestrian safety standards. As a result, the bumpers is stylishly chiseled as well as being extremely strong and functional. The rear bumper utilizes a new cam-style pin adjustment for ensuring perfect gate stowing every time. Re-opening the gate is simple too, only requiring minimal effort, however you can rest easy as the double latch will eliminate accidental opening. The bumper allows im2018sive ground clearance and can accommodate up to 37 Inch tires. Enjoy the MOLLE Pals compatibility to allow multiple pouch mounting configurations. The bumper includes a Class III rated hitch, mounting locations for your jerry can and lift jack (Jack and Hi-lift are not included) and a 3rd brake light mounting bracket.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black finish
- Class III tow rated
- Includes 3rd brake light bracket
- Integrated gas can and jack mounts
- Accommodates a 37 Inch tire
- Manufactured from 3/16 cold rolled steel
- 5 year limited warranty
SKU: n/a -
Rear Bumpers
XRC Gen2 Rear Bumper 07-18 Wrangler JK Smittybilt – 76858
With an updated look that is sure to be a hit with Jeep owners, the next generation XRC rear bumper was designed to meet the needs of off-road enthusiasts. The new bumper features raised corners that allow greater approach and departure angles ÜÄö perfect for vehicles running over sized tires. The redesigned solid D-ring mounts feature an integrated recovery point. The modular nature of the bumper allows you to add a tire carrier to the bumper (sold separately) S/B76857
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two-stage textured matte black finish
- New Solid D-Ring and Jack point Mount – Welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Aux back up light cut out provided
- Manufactured from 3/16-inch cold rolled steel
- Towable D-Ring mounts
- Powder Coat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Modular design, Tire Carrier can be added in the future.
- Class III hitch for True towing
- Anti-rattle provision provided for Receiver hitch
- lights included
SKU: n/a -
Rear Bumpers
XRC Rear Bumper w/ 2 Inch Hitch Receiver 07-18 Wrangler JK Black Powdercoat Smittybilt – 76855
Rear BumpersXRC Rear Bumper w/ 2 Inch Hitch Receiver 07-18 Wrangler JK Black Powdercoat Smittybilt – 76855
Smittybilt XRC Rear Bumpers implement the same technology and advanced engineering as XRC front bumpers, but also add a tow hitch mount and optional spare tire carrier. For rugged, heavy duty equipment designed to prepare you for off-road terrain, Smittybilt XRC Rear Bumpers are the answer you’re looking for.
- XRC Rear Bumper w/ Hitch
- Manufactured from 3/16 inch cold roll steel
- Solid Mount D-Rings – Welds on the inside and out!
- One-Piece welded design
- Class III 2 inch receiver hitch for true towing with towable D-ring mounts
- Matte Black Powdercoat Finish
- 5-Year Limited Warranty on Powdercoat
- Lifetime Limited Warranty on Structure
- Sold As Each
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
SKU: n/a -
Rear Bumpers
XRC Rear Bumper w/ 2 Inch Hitch Receiver and Tire Carrier 07-18 Wrangler JK Black Powdercoat Smittybilt – 76856
Rear BumpersXRC Rear Bumper w/ 2 Inch Hitch Receiver and Tire Carrier 07-18 Wrangler JK Black Powdercoat Smittybilt – 76856
Smittybilt XRC Rear Bumpers implement the same technology and advanced engineering as XRC front bumpers, but also add a tow hitch mount and optional spare tire carrier. For rugged, heavy duty equipment designed to prepare you for off-road terrain, Smittybilt XRC Rear Bumpers are the answer you’re looking for.
- XRC Rear Bumper w/ Hitch and Tire Carrier
- Manufactured from 3/16 inch cold roll steel
- Solid Mount D-Rings – Welds on the inside and out!
- One-Piece welded design
- Class III 2 inch receiver hitch for true towing with towable D-ring mounts
- Adjustable Tire Mount that accommodates up to a 37 inch tire
- Swing Away includes third brake light bracket
- Solid billet aluminum handle with built-in cam lock
- Matte Black Powdercoat Finish
- 5-Year Limited Warranty on Powdercoat
- Lifetime Limited Warranty on Structure
- Sold As Each
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
SKU: n/a
