JEEP BUMPERS
Showing 1–32 of 177 results
-
Tire Carriers
3-Way Spare Tire Strap Poison Spyder – 57-63-001
The Poison Spyder 3-Way Spare Tire Strap securely holds the spare tire in place during the Most rigorous four-wheeling. This strap was designed for use with the Poison Spyder Rear Stinger Tire Carrier, but can be used with other DIY-fabricated spare tire mounts or to simply tie the spare tire down into the bed of the vehicle.
The use of a strap allows virtually infinite adjustability for any size tire, while allowing quick, easy access to the spare tire without having to use any extra tools. All of these reasons are why similar straps are routinely used for spare tire hold-down duty in off-road racing.
Heavy duty ratchet lets you easily adjust, tighten and release tension. Made of high quality nylon webbing with an embroidered Poison Spyder tag.SKU: 57-63-001-PSC -
Front Bumpers
Bestop Jeep JK Approach Roller Highrock 4X4 Modular Bumper Front 07-17 Jeep JK 2/4 Door Matte Black PC Bestop 44947-01
Front BumpersBestop Jeep JK Approach Roller Highrock 4X4 Modular Bumper Front 07-17 Jeep JK 2/4 Door Matte Black PC Bestop 44947-01
On tough rocky trails or shelf roads where sudden drop-offs or ledges are common, your Wrangler can take a beating at either end. Add an Approach Roller to your Modular Bestop bumper, and those obstacles become less of a worry. Designed to take the punishment of off-road rockcrawling and it is a useful tool to help prevent damage to your Jeep.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited w/Modular Front Bumper
- Mounts quickly and easily to our Modular Bumper P/N 44945-01
- Gives extra capability to get over tough obstacles on shelf roads and rocks
- Three-inch diameter roller made of tough cold rolled steel
- Bolt-on installation
- Includes mounting hardware
- Matte Black Powdercoat Finish
- Sold As Each
SKU: 44947-01-BDKW -
Bumper End Cap
Bestop Jeep JK Bumper End Caps HighRock 4X4 Front Modular Steel 07-17 Jeep JK 2/4 Door Black PC Pair Bestop 44946-01
Bumper End CapBestop Jeep JK Bumper End Caps HighRock 4X4 Front Modular Steel 07-17 Jeep JK 2/4 Door Black PC Pair Bestop 44946-01
Modular design lets you build up the front bumper as desired with these optional end caps.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited
- Set of two end caps that attach to pre-drilled holes on Modular Front Bumper P/N 44945-01
- Extends the modular design of the front bumper center section for wider profile
- 1/8 inch thick steel with polymer top cap
- Passenger-side end cap can be modified for mounting of optional Tire Carrier Assembly
- Can be removed if desired for more tire clearance on tough trails or rocks
- Electrostatically-applied E-coat base layer with powdercoat top finish for superior resistance to corrosion, extra protection against nicks, scrapes and scratches
- Matte Black Powdercoat Finish
- Sold As A Pair
SKU: 44946-01-BDKW -
Bumper End Cap
Bestop Jeep JK Bumper End Caps HighRock 4X4 Rear Modular Steel 07-17 Jeep JK 2/4 Door Black PC Pair Bestop 44941-01
Bumper End CapBestop Jeep JK Bumper End Caps HighRock 4X4 Rear Modular Steel 07-17 Jeep JK 2/4 Door Black PC Pair Bestop 44941-01
A burly, battle-tested bumper configurable to match the needs of any Wrangler 2-Door or Wrangler Unlimited enthusiast. Modular design lets you build up the rear bumper as desired with these optional end caps.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited
- Set of two end caps that attach to pre-drilled holes on Modular Rear Bumper P/N 44940-01
- Extends the modular design of the rear bumper center section for wider profile
- 1/8 inch thick steel with polymer top cap
- Passenger-side end cap can be modified for mounting of optional Tire Carrier Assembly
- Can be removed if desired for more tire clearance on tough trails or rocks
- Electrostatically-applied E-coat base layer with powdercoat top finish for superior resistance to corrosion, extra protection against nicks, scrapes and scratches
- Matte Black Powdercoat Finish
- Sold As A Pair
SKU: 44941-01-BDKW -
Front Bumpers
Bestop Jeep JK Bumper HighRock 4X4 Full Width 1-Piece Front 07-17 JK 2/4 Door Matte Black PC Bestop 44910-01
Front BumpersBestop Jeep JK Bumper HighRock 4X4 Full Width 1-Piece Front 07-17 JK 2/4 Door Matte Black PC Bestop 44910-01
These bumpers cover all the way to the fender corners for maximum protection. Well-known for great design, toughness and ease of installation, these bumpers are our most popular. Available in Satin Black or Matte Black finishes. Satin Black is a glossy surface finish while Matte Black is a flat black textured finish – same great bumper, same high quality powdercoat finish.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited
- HighRock 4X4 1-Piece full-width profile front bumper
- 3/16 inch laser cut steel with E-coat, wrinkle finish powdercoat
- D-Ring Attachment ears (sold separately) extend through bumper fully mig welded on front and inside solidly to frame
- Fairlead Plate included
- Bumper is pre-punched to mount most popular brand winches
- Sturdy winch and fairlead attachment plate accommodate most standard-sized winches
- No-drill installation
- Optional Tubular Grill Guard protects both grill and headlights and available in textured black or stainless steel (two light tabs are already welded to guard)
- Optional Approach/Departure Roller mounts to bumper
- Matte Black Powdercoat Finish
- Sold As Each
SKU: 44910-01-BDKW -
Front Bumpers
Bestop Jeep JK Bumper HighRock 4X4 Full Width 1-Piece Front 07-17 JK 2/4 Door Satin Black PC Bestop 42910-01
Front BumpersBestop Jeep JK Bumper HighRock 4X4 Full Width 1-Piece Front 07-17 JK 2/4 Door Satin Black PC Bestop 42910-01
These bumpers cover all the way to the fender corners for maximum protection. Well-known for great design, toughness and ease of installation, these bumpers are our most popular. Available in Satin Black or Matte Black finishes. Satin Black is a glossy surface finish while Matte Black is a flat black textured finish – same great bumper, same high quality powdercoat finish.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited
- HighRock 4X4 1-Piece full-width profile front bumper
- 3/16 inch laser cut steel with E-coat, wrinkle finish powdercoat
- D-Ring Attachment ears (sold separately) extend through bumper fully mig welded on front and inside solidly to frame
- Fairlead Plate included
- Bumper is pre-punched to mount most popular brand winches
- Sturdy winch and fairlead attachment plate accommodate most standard-sized winches
- No-drill installation
- Optional Tubular Grill Guard protects both grill and headlights and available in textured black or stainless steel (two light tabs are already welded to guard)
- Optional Approach/Departure Roller mounts to bumper
- Satin Black Powdercoat Finish
- Sold As Each
SKU: 42910-01-BDKW -
Front Bumpers
Bestop Jeep JK Bumper HighRock 4X4 High Access 1-Piece Front 07-17 JK 2/4 Door Matte Black PC Bestop 44918-01
Front BumpersBestop Jeep JK Bumper HighRock 4X4 High Access 1-Piece Front 07-17 JK 2/4 Door Matte Black PC Bestop 44918-01
High-access bumpers provide more clearance in front for larger 35 inch and up tires. Well-known for great design, toughness and ease of installation. Available in Satin Black or Matte Black finishes. Satin Black is a glossy surface finish while Matte Black is a flat black textured finish – same great bumper, same high quality powder coat finish.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited
- Heavy-duty bumper with approach angles to get over and around the toughest obstacles
- 3/16 inch laser cut steel with E-coat, wrinkle finish powdercoat
- Developed specifically for the hard core rock crawler
- D-Ring Attachment ears (sold separately) extend through bumper fully mig welded on front and inside solidly to frame
- Optional tubular Grille Guards for the front bumper help protect grille and headlights
- Offers pre-punched holes for most Superwinch and other aftermarket winches
- Bolt-on, no-drill installation to factory mounting locations
- JK Bumper measures 70 inches wide x 12 inches deep x 11.5 inches high
- Matte Black Powdercoat Finish
- Sold As Each
SKU: 44918-01-BDKW -
Front Bumpers
Bestop Jeep JK Bumper HighRock 4X4 High Access 1-Piece Front 07-17 JK 2/4 Door Satin Black PC Bestop 42918-01
Front BumpersBestop Jeep JK Bumper HighRock 4X4 High Access 1-Piece Front 07-17 JK 2/4 Door Satin Black PC Bestop 42918-01
High-access bumpers provide more clearance in front for larger 35 inch and up tires. Well-known for great design, toughness and ease of installation. Available in Satin Black or Matte Black finishes. Satin Black is a glossy surface finish while Matte Black is a flat black textured finish – same great bumper, same high quality powder coat finish.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited
- Heavy-duty bumper with approach angles to get over and around the toughest obstacles
- 3/16 inch laser cut steel with E-coat, wrinkle finish powdercoat
- Developed specifically for the hard core rock crawler
- D-Ring Attachment ears (sold separately) extend through bumper fully mig welded on front and inside solidly to frame
- Optional tubular Grille Guards for the front bumper help protect grille and headlights
- Offers pre-punched holes for most Superwinch and other aftermarket winches
- Bolt-on, no-drill installation to factory mounting locations
- JK Bumper measures 70 inches wide x 12 inches deep x 11.5 inches high
- Satin Black Powdercoat Finish
- Sold As Each
SKU: 42918-01-BDKW -
Front Bumpers
Bestop Jeep JK Bumper HighRock 4X4 Narrow Profile 1-Piece Front 07-17 JK 2/4 Door Matte Black PC Bestop 44933-01
Front BumpersBestop Jeep JK Bumper HighRock 4X4 Narrow Profile 1-Piece Front 07-17 JK 2/4 Door Matte Black PC Bestop 44933-01
Narrow-profile front bumpers extend to the edges of the center grille area, with tapered ends. There is no part of the bumper that could possibly make contact with those really big tires for unrestricted 4-wheeling on the rocks and tough terrain. Well-known for great design, toughness and ease of installation. Available in Satin Black or Matte Black finishes. Satin Black is a glossy surface finish while Matte Black is a flat black textured finish – same great bumper, same high quality powder coat finish. Developed specifically for the hard core rock crawler.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited
- 3/16 inch laser cut steel with E-coat, wrinkle finish powdercoat
- Developed specifically for the hard core rock crawler
- Comes standard with pre-cut holes and molded plastic light cans to accommodate OEM lights
- D-Ring Attachment ears (sold separately) extend through bumper fully mig welded on front and inside solidly to frame
- Optional tubular Grille Guards available in textured satin or matte black finish or stainless steel
- Welded fairlead plate included
- Bolt-on, no-drill installation to factory mounting locations
- JK Bumper measures 41.5 inches wide x 11 inches deep x 8 inches high
- Matte Black Powdercoat Finish
- Sold As Each
SKU: 44933-01-BDKW -
Front Bumpers
Bestop Jeep JK Bumper HighRock 4X4 Narrow Profile 1-Piece Front 07-17 JK 2/4 Door Satin Black PC Bestop 42933-01
Front BumpersBestop Jeep JK Bumper HighRock 4X4 Narrow Profile 1-Piece Front 07-17 JK 2/4 Door Satin Black PC Bestop 42933-01
Narrow-profile front bumpers extend to the edges of the center grille area, with tapered ends. There is no part of the bumper that could possibly make contact with those really big tires for unrestricted 4-wheeling on the rocks and tough terrain. Well-known for great design, toughness and ease of installation. Available in Satin Black or Matte Black finishes. Satin Black is a glossy surface finish while Matte Black is a flat black textured finish – same great bumper, same high quality powder coat finish. Developed specifically for the hard core rock crawler.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited
- 3/16 inch laser cut steel with E-coat, wrinkle finish powdercoat
- Developed specifically for the hard core rock crawler
- Comes standard with pre-cut holes and molded plastic light cans to accommodate OEM lights
- D-Ring Attachment ears (sold separately) extend through bumper fully mig welded on front and inside solidly to frame
- Optional tubular Grille Guards available in textured satin or matte black finish or stainless steel
- Welded fairlead plate included
- Bolt-on, no-drill installation to factory mounting locations
- JK Bumper measures 41.5 inches wide x 11 inches deep x 8 inches high
- Satin Black Powdercoat Finish
- Sold As Each
SKU: 42933-01-BDKW -
Rear Bumpers
Bestop Jeep JK Bumper HighRock 4X4 Rear Modular 07-17 Jeep JK 2/4 Door Steel Black Powdercoat Bestop 44940-01
Rear BumpersBestop Jeep JK Bumper HighRock 4X4 Rear Modular 07-17 Jeep JK 2/4 Door Steel Black Powdercoat Bestop 44940-01
A burly, battle-tested bumper configurable to match the needs of any Wrangler 2-Door or Wrangler Unlimited enthusiast. Modular design lets you build up the rear bumper as desired with optional accessories like End Caps, heavy-duty Tire Carrier and Departure Roller kit.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited
- High-access profile allows more clearance over rocks or trail obstacles
- 3/16 inch thick steel to withstand tough off-road trails or rock-crawling
- Electrostatically-applied E-coat base layer with matte black powdercoat top finish for superior resistance to corrosion, extra protection against nicks, scrapes and scratches
- Bolt-on installation to existing factory bumper mounting locations – no drilling required
- Accomodates mounting of optional Tire Carrier for totally integrated appearance and function
- Includes fully-welded D-Ring shackle mounts with 1 inch inside diameter
- Tough as nails, tested for durability and strength
- Accessories not included
- Matte Black Powdercoat Finish
- Sold As Each
SKU: 44940-01-BDKW -
Front Bumpers
Bestop Jeep JK Bumper Modular HighRock 4X4 Front 07-17 Jeep JK 2/4 Door Steel Black Powdercoat Bestop 44945-01
Front BumpersBestop Jeep JK Bumper Modular HighRock 4X4 Front 07-17 Jeep JK 2/4 Door Steel Black Powdercoat Bestop 44945-01
A burly, battle-tested bumper configurable to match the needs of any Wrangler 2-Door or Wrangler Unlimited enthusiast. To get a full-monty front bumper system in place, this is where it all starts. Our new Modular Front Bumper Center Section is the foundation for mounting must-have components such as our Tubular Grille Guard, End Caps, Approach Roller Kit or Skid Plate. Designed around the off-roader who wil be dropping in a winch, and adding some extra lighting and other accessories, the Highrock 4×4 Bumper System definitely cuts the mustard for serious enthusiasts. Built for high-intensity off-roading, any component is easily replaceable if needed.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited
- Modular design lets you build up the front bumper as desired with optional accessories like End Caps, a Skid Plate, Tubular Grille Guard or Approach Roller kit
- E-coat with powdercoat top finish for extra protection and corrosion resistance
- Multi-Option Design allows for replacement of individual bumper elements
- Recessed winch configuration
- Advanced design that can be used with factory fog lights
- Tabbed grille guard bar for light mounts
- Tough as nails: specially tested for durability, vibration, strength, and resistance to environmental elements
- Matte Black Powdercoat Finish
- Sold As Each
SKU: 44945-01-BDKW -
Rear Bumpers
Bestop Jeep JK Departure Roller Highrock 4X4 Modular Bumper Rear 07-17 Jeep JK 2/4 Door Matte Black PC Bestop 44942-01
Rear BumpersBestop Jeep JK Departure Roller Highrock 4X4 Modular Bumper Rear 07-17 Jeep JK 2/4 Door Matte Black PC Bestop 44942-01
On tough rocky trails or shelf roads where sudden drop-offs or ledges are common, your Wrangler can take a beating at either end. Add a Departure Roller to your Modular Bestop bumper, and those obstacles become less of a worry. Designed to take the punishment of off-road rockcrawling and it is a useful tool to help prevent damage to your Jeep.
Details:- Fits 07-17 Jeep Wrangler JK and JK Unlimited w/Modular Rear Bumper
- Mounts quickly and easily to our Modular Bumper P/N 44940-01
- Gives extra capability to get over tough obstacles on shelf roads and rocks
- Three-inch diameter roller made of tough cold rolled steel
- Bolt-on installation
- Includes mounting hardware
- Matte Black Powdercoat Finish
- Sold As Each
SKU: 44942-01-BDKW -
Tire Carriers
Bestop Jeep JK Oversize Tire Carrier 37 Inch HighRock 07-17 Jeep Wrangler JK 2/4 Door Black Each Bestop 61961-01
Tire CarriersBestop Jeep JK Oversize Tire Carrier 37 Inch HighRock 07-17 Jeep Wrangler JK 2/4 Door Black Each Bestop 61961-01
HighRock 4X4 Oversize Tire Carrier replaces your factory tailgate carrier with more heft, more muscle to handle larger-than-stock tires. Factory tire carriers are fine for the OEM spare, but larger tires mean more weight and larger dimensions and more stress on the tailgate hinges. Accommodate body lift kits, and include all instructions and hardware to install.
Details:- Fits 07-17 Jeep Wrangler JK
- And 07-17 Jeep Wrangler JK Unlimited
- No-drill application, secure, lockable tire storage – Lock not included
- Adjustable height ability and secures a tire up to 37 inches and 200 lbs.
- Allows oversized tires to work with tailgate and to clear rear bumper
- Heavy tubular steel provides strength
- Black powdercoat with wrinkle finish protects against corrosion
- Includes rear brake light relocation bracket
- Accommodates Jeeps with body lift kits
- Black Powdercoat Finish
SKU: 61961-01-BDKW -
Front Bumpers
DV8 Offroad ABJL-01-HKJT Front Bumper Adapter Bracket Jeep JK to Jeep JL
ABJL-01 Jeep JK to JL Adapter Bracket. The DV8 Offroad ABJL-01 bracket allows for the mounting of any DV8 Offroad Jeep JK front bumper to the Jeep JL frame with no drilling!
This bracket spaces the bumper the ideal distance away from the JL and allows for the mounting of most aftermarket JK bumpers.
The kit comes with all necessary hardware to install the bracket to the Jeep and allows you to use the hardware that comes with your aftermarket bumper to complete the install. Great for those who don’t want to wallow out the frame holes to mount their bumper!
Details:- No Drilling
- Hardware Included
SKU: ABJL-01 -
Front Bumpers
DV8 Offroad FBJL-01 Jeep JL Front Bumper with Bull Bar
FBJL-01 2018+ Jeep JL Stubby Front Bumper
The DV8 Offroad FBJL-01 was designed with the hardcore Jeeper in mind. It features a high clearance design and incorporates a protected 20 inch slim led light bar for increased visibility. The bumper is rated for up to a 12,500 lbs winch and is coated with the signature DV8 textured black finish. This bumper is designed specifically for the Jeep JL and requires no drilling to install.
Features:
-High clearance design
-Aggressive angles and styling
-Incorporates a 20 LED light bar
-Easy to install
-Reinforced bull barSKU: FBJL-01 -
Front Bumpers
DV8 Offroad FBSHTB-01-HKJT Front Bumper 07-18 Wrangler JK/JL
DV8 Offroad bumpers are all trail tested and proven designs! 3/16 inch and 1/4 inch cold rolled steel, .120 wall tubing, high degree angles and raised corners, light tabs and Solid D-ring mounts w/ rings included. All bumpers come in textured black powdercoating. This style is full size recovery bumper that accepts factory fog lights and comes with a winch plate. For 2007 – 2018 Jeep Wrangler JK and 2018 Wrangler JL all models. Easy installation, no modifications needed, Hardware included.
Features:- Front Full size Recovery Bumper
- .120 Wall Tubing
- 3/16 inch and 1/4 inch cold rolled steel
- Solid D-Ring Mounts with Rings Included
- Hardware Included
- Textured Black Powdercoat
- Fits 2007-2018 Jeep Wrangler JK
- Fits 2018 Wrangler JL
- Sold as Each
SKU: FBSHTB-01 -
Front Bumpers
DV8 Offroad FBSHTB-06-HKJT Front Bumper 06 07-18 Wrangler JK/JL
DV8 Offroad bumpers are all trail tested and proven designs! 3/16 inch and 1/4 inch cold rolled steel, .120 wall tubing, high degree angles and raised corners, light tabs and Solid D-ring mounts w/ rings included. All bumpers come in textured black powdercoating. This style is a heavy duty midsize bumper with bull bar. For 2007-2018 Jeep Wrangler JK and JL all models. Easy installation, no modifications needed, Hardware included.
Features:- Front Heavy Duty Midsize Bumper with Bull Bar
- .120 Wall Tubing
- 3/16 inch and 1/4 inch Cold Rolled Steel
- Solid D-ring Mounts with Rings Included
- Textured Black Powdercoat
- Hardware Included
- Fits 2007-2018 Jeep Wrangler JK
- Fits 2018 Wrangler JL
- Sold as Each
SKU: FBSHTB-06 -
Front Bumpers
DV8 Offroad FBSHTB-07-HKJT Front Bumper 07 w/LED Lights 07-18 Wrangler JK/JL
DV8 Offroad bumpers are all trail tested and proven designs! 3/16 inch and 1/4 inch cold rolled steel, .120 wall tubing, high degree angles and raised corners, light tabs and Solid D-ring mounts w/ rings included. All bumpers come in textured black powdercoating. This style is a midsize bumper with 4 led lights built in and a bull bar. For 2007-2018 Jeep Wrangler all models. Easy installation, no modifications needed, lights and hardware included.
Features:- Midsize Front Bumper
- .120 Wall Tubing
- 3/16 inch and 1/4 inch Cold Rolled Steel
- Solid D-ring Mounts with Rings Included
- Textured Black Powdercoat
- Hardware Included
- Includes: 4 LED Lights built in and a Bull Bar
- Fits 2007-2018 Jeep Wrangler
- Fits 2018 Jeep Wrangler JL
- Sold as Each
SKU: FBSHTB-07 -
Front Bumpers
DV8 Offroad FBSHTB-08-HKJT Front Bumper w/LED Lights 07-18 Wrangler JK/JL
DV8 Offroad bumpers are all trail tested and proven designs! 3/16 inch and 1/4 inch cold rolled steel, .120 wall tubing, high degree angles and raised corners, light tabs and Solid D-ring mounts w/ rings included. All bumpers come in textured black powdercoating. This style is a Heavy Duty midsize bumper with 2 led lights built in and a bull bar. For 2007-2018 Jeep Wrangler all models. Easy installation, no modifications needed, lights and hardware included.
- Front Heavy Duty Midsize Bumper with 2 LED Lights Built in and a Bull Bar
- Textured Black Powdercoat
- Fits 2007-2018 Jeep Wrangler JK
- Fits 2018 Jeep Wrangler JL
- Sold as Each
SKU: FBSHTB-08 -
Front Bumpers
DV8 Offroad FBSHTB-10-HKJT Front Bumper w/Skid Plate 07-18 Wrangler JK
DV8 Offroad bumpers are all trail tested and proven designs! 3/16 inch and 1/4 inch cold rolled steel, .120 wall tubing, high degree angles and raised corners, light tabs and Solid D-ring mounts w/ rings included. All bumpers come in textured black powdercoating. This style is a full size bumper with built in skid plate. Built in winch plate for 12500 lb winch. For 2007-2018 Jeep Wrangler all models. Easy installation, no modifications needed, Hardware included.
Features:- Front Full Size Bumper
- .120 Wall Tubing
- 3/16 inch and 1/4 inch cold rolled steel
- Solid D-Ring Mounts with Rings Included
- Hardware Included
- Textured Black Powdercoat
- Patent Pending
- Fits 2007-2018 Jeep Wrangler
- Sold as Each
SKU: FBSHTB-10 -
Front Bumpers
DV8 Offroad FBSHTB-11-HKJT Front Bumper w/LED Lights 07-18 Wrangler JK
DV8 Offroad bumpers are all trail tested and proven designs! 3/16 inch and 1/4 inch cold rolled steel, .120 wall tubing, high degree angles and raised corners, light tabs and Solid D-ring mounts w/ rings included. All bumpers come in textured black powdercoating. This style is a stubby bumper with detachable stinger. Built in winch plate for 12500 lb winch. For 2007 – 2018 Jeep Wrangler all models. Easy installation, no modifications needed, hardware and lights included.
Features:- Stubby Front Bumper
- .120 Wall Tubing
- 3/16 inch and 1/4 inch Cold Rolled Steel
- Solid D-ring Mounts with Rings Included
- Textured Black Powdercoat
- Hardware and Lights Included
- Built in Winch Plate for 12500 lb Winch
- Fits 2007-2018 Jeep Wrangler
- Sold as Each
SKU: FBSHTB-11 -
Front Bumpers
DV8 Offroad FBSHTB-12-HKJT Front Bumper w/Fog Lights 07-18 Wrangler JK
Our Hammer Forged front bumpers were designed and built with hardcore wheeling in mind. Inspired by King of the Hammers style racing and crawling these bumpers are designed to perform on the rocks where you need protection the most. All of our Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel.
The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4 inch steel while others are made of 3/16 inch steel depending on the amount of abuse that each part is likely to take. The result is a lighter, stronger bumper that is ready to take on the toughest challenges that you will throw at your Jeep.
Features:- Hammer Forged Front Bumper
- Great approach angles
- Integrated skid plate (ties into the frame)
- Fog light holes for factory or aftermarket fog lights
- Fender protection
- Winch mounts low to allow airflow
- D-Rings Included
- Reinforced .170 wall stinger
- Patent Pending
- Fits 2007-2018 Jeep Wrangler
- Sold as Each
SKU: FBSHTB-12 -
Front Bumpers
DV8 Offroad FBSHTB-13-HKJT Front Bumper w/Fog Lights FS-13 07-18 Wrangler JK/JL
Our Hammer Forged front bumpers were designed and built with hardcore wheeling in mind. Inspired by King of the Hammers style racing and crawling these bumpers are designed to perform on the rocks where you need protection the most. All of our Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel.
The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4 inch steel while others are made of 3/16 inch steel depending on the amount of abuse that each part is likely to take. The result is a lighter, stronger bumper that is ready to take on the toughest challenges that you will throw at your Jeep.
Features:- Hammer Forged Front Bumper
- Fog light holes for factory or aftermarket fogs
- D-Rings included
- Winch plate
- Gusseted Stinger
- .170 Wall Stinger
- Grill Protection
- Highest Profile Bumper in the Hammer Forged Line
- Patent Pending
- Fits 2007-2018 Jeep Wrangler JK
- Fits 2018 Jeep Wrangler JL
- Sold as Each
SKU: FBSHTB-13 -
Front Bumpers
DV8 Offroad FBSHTB-14-HKJT Front Bumper w/Fog Lights And LED 07-18 Wrangler JK/JL
Our Hammer Forged front bumpers were designed and built with hardcore wheeling in mind. Inspired by King of the Hammers style racing and crawling these bumpers are designed to perform on the rocks where you need protection the most. All of our Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel.
The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4 inch steel while others are made of 3/16 inch steel depending on the amount of abuse that each part is likely to take. The result is a lighter, stronger bumper that is ready to take on the toughest challenges that you will throw at your Jeep.
Features:- Hammer Forged Front Bumper
- Mesh insert for running the bumper without an LED
- Fog light holes for factory or aftermarket fog lights
- Mid-Length for better protection of fender and grill area
- .170 wall stinger
- High clearance
- Meets with the factory frame
- D-Rings included
- Patent Pending
- Fits 2007-2018 Jeep Wrangler JK
- Fits 2018 Jeep Wrangler JL
- Sold as Each
Note:
- Will not work with the 2018 Rock Hard Edition Fog Light
- LED Light Bar Mounting intergrated into the Bumper Optional
SKU: FBSHTB-14 -
Front Bumpers
DV8 Offroad FBSHTB-15-HKJT Front Bumper w/Fog Lights FS-15 07-18 Wrangler JK/JL
Our Hammer Forged front bumpers were designed and built with hardcore wheeling in mind. Inspired by King of the Hammers style racing and crawling these bumpers are designed to perform on the rocks where you need protection the most. All of our Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel.
The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4 inch steel while others are made of 3/16 inch steel depending on the amount of abuse that each part is likely to take. The result is a lighter, stronger bumper that is ready to take on the toughest challenges that you will throw at your Jeep.
Features:- Hammer Forged Front Bumper
- Fog light holes for factory or aftermarket fogs
- D-Rings included
- Winch plate
- Gusseted Stinger
- .170 Wall Stinger
- Lower winch mounting point
- Lightest Bumper in the Hammer Forged line
- Patent Pending
- Fits 2007-2018 Jeep Wrangler JK
- Fits 2018 Wrangler JL
- Sold as Each
SKU: FBSHTB-15 -
Front Bumpers
DV8 Offroad FBSHTB-16-HKJT Front Bumper w/Fog Lights FS-16 07-18 Wrangler JK
Our Hammer Forged front bumpers were designed and built with hardcore wheeling in mind. Inspired by King of the Hammers style racing and crawling these bumpers are designed to perform on the rocks where you need protection the most. All of our Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel.
The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4 inch steel while others are made of 3/16 inch steel depending on the amount of abuse that each part is likely to take. The result is a lighter, stronger bumper that is ready to take on the toughest challenges that you will throw at your Jeep.
Features:- Front Hammer Forged Bumper
- Fog light holes for factory or aftermarket fogs
- D-Rings included
- Winch plate
- Stinger
- .170 Wall Stinger
- Lower winch mounting point
- Lower Skid Plate
- Includes a cigarette plug that can be wired to the battery
- Patent Pending
- Fits 2007-2018 Jeep Wrangler
- Sold as Each
Note:
- Space for a 10 inch SIim Light bar-Not Included
- 5 inch LED or fog lights-Order Separately
SKU: FBSHTB-16 -
Front Bumpers
DV8 Offroad FBSHTB-17-HKJT Front Bumper w/Fog Lights FS-17 07-18 Wrangler JK
Our Hammer Forged front bumpers were designed and built with hardcore wheeling in mind. Inspired by King of the Hammers style racing and crawling these bumpers are designed to perform on the rocks where you need protection the most. All of our Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel.
The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4 inch steel while others are made of 3/16 inch steel depending on the amount of abuse that each part is likely to take. The result is a lighter, stronger bumper that is ready to take on the toughest challenges that you will throw at your Jeep.
Features:- Hammer Forged Front Bumper
- Fog light holes for factory or aftermarket fog lights
- Mid-Length for better protection of fender and grill area
- .170 wall stinger
- High clearance
- Meets with the factory frame
- D-Rings included
- Patent Pending
- Fits 2007-2018 Jeep Wrangler
- Sold as Each
Note:
- LEDs or fog lights Sold Separately
- LED light bar mounting integrated into the bumper Optional
- Cigarette Light Plug Optional
SKU: FBSHTB-17 -
Front Bumpers
DV8 Offroad FBSHTB-18-HKJT Front Bumper w/Fog Lights FS-18 07-18 Wrangler JK
Our Hammer Forged front bumpers were designed and built with hardcore wheeling in mind. Inspired by King of the Hammers style racing and crawling these bumpers are designed to perform on the rocks where you need protection the most. All of our Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel.
The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4 inch steel while others are made of 3/16 inch steel depending on the amount of abuse that each part is likely to take. The result is a lighter, stronger bumper that is ready to take on the toughest challenges that you will throw at your Jeep.
Features:- Hammer Forged Front Bumper
- Fog light holes for factory or aftermarket fog lights
- Full-Length for better protection of fender and grill area
- .170 wall stinger
- High clearance
- Meets with the factory frame
- D-Rings included
- Turn Signal Lights in the Bumper
- Patent Pending
- Fits 2007-2018 Jeep Wrangler
- Sold as Each
Note:
- LED’s or fog lights Sold Separately
- Cigarette Lighter Plug Optional
SKU: FBSHTB-18 -
Front Bumpers
DV8 Offroad FBSHTB-19-HKJT Front Bumper w/Fog Lights FS-19 07-18 Wrangler JK
Our Hammer Forged front bumpers were designed and built with hardcore wheeling in mind. Inspired by King of the Hammers style racing and crawling these bumpers are designed to perform on the rocks where you need protection the most. All of our Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel.
The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4 inch steel while others are made of 3/16 inch steel depending on the amount of abuse that each part is likely to take. The result is a lighter, stronger bumper that is ready to take on the toughest challenges that you will throw at your Jeep.
Features:- Hammer Forged Front Bumper
- Fog light holes for factory or aftermarket fog lights
- Mid-Length for better protection of fender and grill area
- .170 wall stinger
- High clearance
- Meets with the factory frame
- D-Rings included
- Turn Signal Lights in the Bumper
- Patent Pending
- Fits 2007-2018 Jeep Wrangler
- Sold as Each
Note:
- LED’s or fog lights Sold Separately
- Cigarette Lighter Plug Optional
- LED light bar mounting integrated into the bumper Optional
SKU: FBSHTB-19 -
Front Bumpers
DV8 Offroad FBSHTB-24-HKJT Front Bumper w/Light Bracket Winch Plate 07-18 Wrangler JK/JL
Front BumpersDV8 Offroad FBSHTB-24-HKJT Front Bumper w/Light Bracket Winch Plate 07-18 Wrangler JK/JL
DV8 Offroad bumpers are all trail tested and proven designs! 3/16 inch and 1/4 inch cold rolled steel, .120 wall tubing, high degree angles and raised corners. All bumpers come in textured black powdercoating. This style is a stubby bumper with detachable stinger. Built in winch plate for 12500 lb winch. For 2007-2018 Jeep Wrangler all models. Easy installation, no modifications needed, hardware and lights included.
Features:- Front Stubby Bumper with Detachable Stinger
- Recessed Winch Plate
- Winch Plate Cover (for use without winch)
- Removable LED light bar mount for 20 inch Light bar
- Cut outs to flush mount 3 inch POD bottom mount lights
- Aggressive Design
- High Clearance
- Light Weight
- Fits 2007-2018 Jeep Wrangler JK
- fits 2018 Jeep Wrangler JL
- Sold as Each
SKU: FBSHTB-24 -
Front Bumpers
DV8 Offroad FBSHTB-25-HKJT Front Bumper 07-18 Jeep JK/JL Wrangler Steel Stubby
The FS-25 combines the great looks of the popular FS-15 bumper with an integrated, boxed in LED light bull bar. This bull bar is removable and features a rigid dimple dye cut design to reduce weight and provide additional structural integrity.
Features:- Stubby Front Bumper
- Includes the 20 inch LED Light bar (Single row)
- Allows the use of factory fog lights
- Comes with winch plate and D-Rings
- Comes with boxed LED light bar bull bar
- Can accommodate up to a 12,000 lbs winch
- Holes for wiring are pre-drilled for cleaner installs
- Fits 2007-2018 Jeep Wrangler JK
- Fits 2018 Jeep Wrangler JL
- Sold as Each
SKU: FBSHTB-25
