Front Bumpers
Showing 33–59 of 59 results
-
Front Bumpers
JK Brawler Lite Front Bumper Brawler Bar Tube Gussets Tabs Poison Spyder – 17-59-010-DBT
Front BumpersJK Brawler Lite Front Bumper Brawler Bar Tube Gussets Tabs Poison Spyder – 17-59-010-DBT
JK Brawler Lite Front Bumper Brawler Bar Tube Gussets Tabs for Jeep Wrangler JK 2007-2016. The Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with Full features.
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- Brawler Bar made of 1.5 X .120 wall DOM tubing with 1.25 OD X .120 wall DOM tube gussets
- High clearance recovery shackle tabs
- CNC machined from 1 thick plate steel
Plate Steel Construction
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles.
Brawler Bar
The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-Notched, NC-bent 1.75 inch diameter .120 inch wall DOM tubing. The complex laser-cut Notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3/16 inch plate steel or CNC laser Notched DOM tubing. Note: Warn PowerPlant winches are Not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer).
Easy Installation
Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeep frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that does Not require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Brawler Lite comes with built-in, recessed fog lamp mounts that are designed to easily accept your Stock fog lamps. And these are Not just simple light tabs placed behind a hole in the bumper they are recessed in a bucket made of a Full tubular section to encircle the lamp and keep light from annoyingly leaking behind and around the bumper.Adding further convenience are mounting holes for re-installing the harness retainer clips for the factory wiring, to keep the wiring neatly secured. If you would like a lot more power than the factory fog lamps provide, you can opt to install a set of Rigid Industries Dually or D2 Dually LED lamps using our JK Fog Light Mounts for Rigid Industries Dually/D2.
Important: The Stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do Not fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the Stock fog lamps.
Winch Compatibility
The Brawler Lite top-mounted, integrated winch mount is part of the Fully boxed, internally gusseted bumper shell. Winches that are mounted inside the bumper lose this box strength as well as the strength of internal gussets.The Brawler Lite is designed to accept Most Warn and other brand winches that use the popular 10 inch X 4.5 inch mounting pattern, with a few small exceptions. Warn Powerplant winches fit the Brawler Lite with Brawler Bar and Plate Gussets just fine, however it will require slight modifications to use this winch with the Tube Gusset variant. Mounting the Warn Zeon winches requires our Zeon Winch Spacer Plates. See the FAQ section below for further information on both of these winches.
Recovery Shackle Tabs
Optional Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.Separate versions of the Brawler Lite are available without the Brawler Bar or with the Trail Stinger. The Brawler Lite comes to you as bare steel, ready to accept paint or powdercoat in the color of your choice. A powdercoat option for this item is Not currently available directly through Poison Spyder.
SKU: 17-59-010-DBT-PSC -
Front Bumpers
JK Brawler Lite Front Bumper Poison Spyder – 17-59-010
JK Brawler Lite Front Bumper for Jeep Wrangler JK 2007-2016. The Brawler Lite front bumper for JK is a Mid-width, high clearance bumper designed to combine hard core off-road performance with Full features.
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeep frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that does Not require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
The Brawler Lite features recessed buckets to mount the factory fog lamps, Fully protecting them in deep tubular sockets with direct-fit mounting flanges. ANother thoughtful feature are the conveniently placed loom mounting holes, for reinstalling the Christmas tree loom hangers of the factory fog lamp harness.
Important: The Stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do Not fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the Stock fog lamps.Any winch with a Standard 10 X 4.5 inch mounting pattern will bolt right on to the Brawler Lite. Beefy internal gusseting directly below the winch mount provides the strength to sustain long, heavy pulls. The center of the bumper, where the winch sits, is slightly recessed with the winch mounting on top, without compromising the structural integrity of the bumper by cutting a huge hole in the bumper structure to place the winch down inside like other manufacturers bumpers. If mounting a winch, you’ll need a Winch Fairlead Mount, sold separately.
Optional Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.
A separate version of the Brawler Lite is available with a tubular Brawler Bar. The Brawler Lite comes to you as bare steel, ready to accept paint or powdercoat in the color of your choice. A powdercoat option for this item is Not currently available directly through Poison Spyder. See your nearest Poison Spyder dealer for powdercoating options through a coating shop near you.
SKU: 17-59-010-PSC -
Front Bumpers
JK Brawler Lite Front Bumper Tabs Poison Spyder – 17-59-010-D
JK Brawler Lite Front Bumper Tabs for Jeep Wrangler JK 2007-2016. The Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with Full features.
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- High clearance recovery shackle tabs
- CNC machined from 1 thick plate steel
Plate Steel Construction
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles.
Brawler Bar
The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-Notched, NC-bent 1.75 inch diameter .120 inch wall DOM tubing. The complex laser-cut Notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3/16 inch plate steel or CNC laser Notched DOM tubing. Note: Warn PowerPlant winches are Not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer).
Easy Installation
Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeep frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesn’t require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Brawler Lite comes with built-in, recessed fog lamp mounts that are designed to easily accept your Stock fog lamps. And these are Not just simple light tabs placed behind a hole in the bumper they are recessed in a bucket made of a Full tubular section to encircle the lamp and keep light from annoyingly leaking behind and around the bumper.Adding further convenience are mounting holes for re-installing the harness retainer clips for the factory wiring, to keep the wiring neatly secured. If you would like a lot more power than the factory fog lamps provide, you can opt to install a set of Rigid Industries Dually or D2 Dually LED lamps using our JK Fog Light Mounts for Rigid Industries Dually/D2.
Important: The Stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do Not fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the Stock fog lamps.
Winch Compatibility
The Brawler Lite top-mounted, integrated winch mount is part of the Fully boxed, internally gusseted bumper shell. Winches that are mounted inside the bumper lose this box strength as well as the strength of internal gussets.The Brawler Lite is designed to accept Most Warn and other brand winches that use the popular 10 inch X 4.5 inch mounting pattern, with a few small exceptions. Warn Powerplant winches fit the Brawler Lite with Brawler Bar and Plate Gussets just fine, however it will require slight modifications to use this winch with the Tube Gusset variant. Mounting the Warn Zeon winches requires our Zeon Winch Spacer Plates. See the FAQ section below for further information on both of these winches.
Recovery Shackle Tabs
Optional Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.Separate versions of the Brawler Lite are available without the Brawler Bar or with the Trail Stinger. The Brawler Lite comes to you as bare steel, ready to accept paint or powdercoat in the color of your choice. A powdercoat option for this item is Not currently available directly through Poison Spyder.
SKU: 17-59-010-D-PSC -
Front Bumpers
JK Brawler Lite Front Bumper Trail Stinger Poison Spyder – 17-59-010-ST
JK Brawler Lite Front Bumper Trail Stinger for Jeep Wrangler JK 2007-2016. The Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with Full features. This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles. This product ships as bare steel. It will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- Trail Stinger made of 1.5 X .120 wall DOM tubing with 1.25 OD X .120 wall DOM tube gussets
Plate Steel Construction
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles.
Trail Stinger
The Trail Stinger used on this version of the Brawler Lite is modeled after the famous Trail Stinger originally developed and popularized by Poison Spyder. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger is made of CNC laser-Notched, NC-bent 1.75 inch diameter .120 inch wall DOM tubing.The complex laser-cut Notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. The Trail Stinger is fortified by a pair of 1.25 inch diameter .120 inch wall DOM tube gussets. Note: Warn PowerPlant winches are Not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Brawler Lite is also available with the Brawler Bar or with no bar/stinger.
Easy Installation
Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeep frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesn’t require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Brawler Lite comes with built-in, recessed fog lamp mounts that are designed to easily accept your Stock fog lamps. And these are Not just simple light tabs placed behind a hole in the bumper they are recessed in a bucket made of a Full tubular section to encircle the lamp and keep light from annoyingly leaking behind and around the bumper. Adding further convenience are mounting holes for re-installing the harness retainer clips for the factory wiring, to keep the wiring neatly secured. If you’d like a lot more power than the factory fog lamps provide, you can opt to install a set of Rigid Industries Dually or D2 Dually LED lamps using our JK Fog Light Mounts for Rigid Industries Dually/D2.
Important: The Stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do Not fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the Stock fog lamps.
Winch Compatibility
The Brawler Lite top-mounted, integrated winch mount is part of the Fully boxed, internally gusseted bumper shell. Winches that are mounted inside the bumper lose this box strength as well as the strength of internal gussets. The Brawler Lite is designed to accept Most Warn and other brand winches that use the popular 10 inch X 4.5 inch mounting pattern, with a few small exceptions. Warn Powerplant winches fit the Brawler Lite with Brawler Bar and Plate Gussets just fine, however it will require slight modifications to use this winch with the Tube Gusset variant. Mounting the Warn Zeon winches requires our Zeon Winch Spacer Plates. See the FAQ section below for further information on both of these winches.
Recovery Shackle Tabs
Optional Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.
Separate versions of the Brawler Lite are available with no bar or with the Brawler Bar.The Brawler Lite comes to you as bare steel, ready to accept paint or powdercoat in the color of your choice. A powdercoat option for this item is Not currently available directly through Poison Spyder.
SKU: 17-59-010-ST-PSC -
Front Bumpers
JK Brawler Lite Front Bumper Trail Stinger Tabs Poison Spyder – 17-59-010-DST
JK Brawler Lite Front Bumper Trail Stinger Tabs for Jeep Wrangler JK 2007-2016. The Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with Full features. This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles. This product ships as bare steel. It will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- Trail Stinger made of 1.5 X .120 wall DOM tubing with 1.25 OD X .120 wall DOM tube gussets
- High clearance recovery shackle tabs CNC machined from 1 thick plate steel
Plate Steel Construction
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles.
Trail Stinger
The Trail Stinger used on this version of the Brawler Lite is modeled after the famous Trail Stinger originally developed and popularized by Poison Spyder. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger is made of CNC laser-Notched, NC-bent 1.75 inch diameter .120 inch wall DOM tubing.The complex laser-cut Notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. The Trail Stinger is fortified by a pair of 1.25 inch diameter .120 inch wall DOM tube gussets. Note: Warn PowerPlant winches are Not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Brawler Lite is also available with the Brawler Bar or with no bar/stinger.
Easy Installation
Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeep frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that does Not require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Brawler Lite comes with built-in, recessed fog lamp mounts that are designed to easily accept your Stock fog lamps. And these are Not just simple light tabs placed behind a hole in the bumper they are recessed in a bucket made of a Full tubular section to encircle the lamp and keep light from annoyingly leaking behind and around the bumper. Adding further convenience are mounting holes for re-installing the harness retainer clips for the factory wiring, to keep the wiring neatly secured. If you would like a lot more power than the factory fog lamps provide, you can opt to install a set of Rigid Industries Dually or D2 Dually LED lamps using our JK Fog Light Mounts for Rigid Industries Dually/D2.
Important: The Stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do Not fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the Stock fog lamps.
Winch Compatibility
The Brawler Lite top-mounted, integrated winch mount is part of the Fully boxed, internally gusseted bumper shell. Winches that are mounted inside the bumper lose this box strength as well as the strength of internal gussets. The Brawler Lite is designed to accept Most Warn and other brand winches that use the popular 10 inch X 4.5 inch mounting pattern, with a few small exceptions. Warn Powerplant winches fit the Brawler Lite with Brawler Bar and Plate Gussets just fine, however it will require slight modifications to use this winch with the Tube Gusset variant. Mounting the Warn Zeon winches requires our Zeon Winch Spacer Plates. See the FAQ section below for further information on both of these winches.
Recovery Shackle Tabs
Optional Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.
Separate versions of the Brawler Lite are available with no bar or with the Brawler Bar.The Brawler Lite comes to you as bare steel, ready to accept paint or powdercoat in the color of your choice. A powdercoat option for this item is Not currently available directly through Poison Spyder.
SKU: 17-59-010-DST-PSC -
Front Bumpers
JK Brawler MID Front Bumper Brawler Bar Poison Spyder – 17-63-010-BT
JK Brawler Mid Front Bumper Brawler Bar for Jeep Wrangler JK 2007-2016. The Brawler Mid front bumper for JK is a Mid-width, high clearance bumper designed to combine off-road performance with Full features. This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
The ends of the bumper extend farther outboard than our Brawler Lite bumper, to about half the width of the tires. This provides increased brush protection for the grille corners and fenders, and gives the Jeep a more expeditionary look than our more rock-crawling specific bumpers. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- Mid-width, multi-faceted design protects lower grille and extends halfway across the front of the tires
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Dually’s by use of adapter plate (sold separately)
- Brawler Bar made of 1.5 X .120 wall DOM tubing with 1.25 OD X .120 wall DOM tube gussets
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles.
Brawler Bar
(This part number is for the Brawler Mid without any Brawler Bar. Click Here for the Brawler Mid with Brawler Bar). The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-Notched, NC-bent 1 3/4 inch diameter .120 inch wall DOM tubing. The complex laser-cut Notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3/16 inch plate steel or CNC laser Notched DOM tubing.Note: Warn PowerPlant winches are Not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer).
Easy Installation
Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Mid can be mounted without cutting or altering the Jeep frame rails. The faceted design of the Brawler Mid provides the best ground clearance and approach angle possible in a bumper that doesn’t require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Mid Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Brawler Mid comes with provisions for re-mounting your factory fog lamps. These consist of recessed fog lamp buckets that are made of CNC laser cut DOM tubing with a mounting flange designed to accept the mounting hardware of the Stock lamps. The recess and all-steel buckets help protect the lamps from the rocks. For those who do Not have the Stock fog lamps, or would like to upgrade to more powerful LED lamps, Poison Spyder offers a unique LED Fog Lamp Mounting Kit for installing a pair of Rigid Industries Dually LED lamps in the fog lamp locations.
Important: The Stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do Not fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the Stock fog lamps.
Winch Compatibility
The Brawler Mid bumper is designed to accept Most Warn winches, and winches from other manufacturers that conform to Warn’s Standardized winch mounting dimensions. The winch sits in a slight depression on the top surface of the bumper, with plenty of CNC laser cut plate steel gusseting inside the bumper shell, directly underneath the winch to provide maximum strength.The Winch Fairlead Mount is sold separately, so that those who wish to Not run a winch are left with a clean looking, unobstructed top surface on their bumper. Important: installing the Warn Zeon winch on the Brawler Mid Front Bumper requires Two sets of our Zeon Winch Spacer Plates (p/n 45-57-010-03, sold separately).
Recovery Shackle Tabs
Optional Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Mid bumper.
Optional Brawler Mid Skid
The optional Brawler Mid Skid attaches to the bottom of the Brawler Mid bumper to conceal and protect the Stock crash bar, plus it has an extension to protect the electronic swaybar disconnect motor found on Rubicon JKs.The skid is made of CNC laser-cut 3/16 inch plate steel, precision brake-formed for a precise fit to the Brawler Mid front bumper.
A separate version of the Brawler Mid is available without the Brawler Bar. The Brawler Mid comes to you as bare steel, ready to accept paint or powdercoat in the color of your choice. A powdercoat option for this item is Not currently available directly through Poison Spyder. See your nearest Poison Spyder dealer for powdercoating options through a coating shop near you.SKU: 17-63-010-BT-PSC -
Front Bumpers
JK Brawler MID Front Bumper Brawler Bar Tabs Black Poison Spyder – 17-63-010-DBTP1
JK Brawler Mid Front Bumper Brawler Bar Tabs Black for Jeep Wrangler JK 2007-2016. The Brawler Mid front bumper for JK is a Mid-width, high clearance bumper designed to combine off-road performance with Full features. This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
The ends of the bumper extend farther outboard than our Brawler Lite bumper, to about half the width of the tires. This provides increased brush protection for the grille corners and fenders, and gives the Jeep a more expeditionary look than our more rock-crawling specific bumpers. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- SpyderShell Armor Coat finish with 5-Year Warranty
- Mid-width, multi-faceted design protects lower grille and extends halfway across the front of the tires
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- Brawler Bar made of 1.5 X .120 wall DOM tubing with 1.25 OD X .120 wall DOM tube gussets
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles.
Brawler Bar
(This part number is for the Brawler Mid without any Brawler Bar. Click Here for the Brawler Mid with Brawler Bar). The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-Notched, NC-bent 1 3/4 inch diameter .120 inch wall DOM tubing. The complex laser-cut Notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3/16 inch plate steel or CNC laser Notched DOM tubing.Note: Warn PowerPlant winches are Not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer).
Easy Installation
Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Mid can be mounted without cutting or altering the Jeep frame rails. The faceted design of the Brawler Mid provides the best ground clearance and approach angle possible in a bumper that does not require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Mid Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Brawler Mid comes with provisions for re-mounting your factory fog lamps. These consist of recessed fog lamp buckets that are made of CNC laser cut DOM tubing with a mounting flange designed to accept the mounting hardware of the Stock lamps. The recess and all-steel buckets help protect the lamps from the rocks. For those who do Not have the Stock fog lamps, or would like to upgrade to more powerful LED lamps, Poison Spyder offers a unique LED Fog Lamp Mounting Kit for installing a pair of Rigid Industries Dually LED lamps in the fog lamp locations.
Important: The Stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do Not fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the Stock fog lamps.
Winch Compatibility
The Brawler Mid bumper is designed to accept Most Warn winches, and winches from other manufacturers that conform to Warn Standardized winch mounting dimensions. The winch sits in a slight depression on the top surface of the bumper, with plenty of CNC laser cut plate steel gusseting inside the bumper shell, directly underneath the winch to provide maximum strength.The Winch Fairlead Mount is sold separately, so that those who wish to Not run a winch are left with a clean looking, unobstructed top surface on their bumper. Important: installing the Warn Zeon winch on the Brawler Mid Front Bumper requires Two sets of our Zeon Winch Spacer Plates (p/n 45-57-010-03, sold separately).
Recovery Shackle Tabs
Optional Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Mid bumper.
Optional Brawler Mid Skid
The optional Brawler Mid Skid attaches to the bottom of the Brawler Mid bumper to conceal and protect the Stock crash bar, plus it has an extension to protect the electronic swaybar disconnect motor found on Rubicon JKs.The skid is made of CNC laser-cut 3/16 inch plate steel, precision brake-formed for a precise fit to the Brawler Mid front bumper.
A separate version of the Brawler Mid is available without the Brawler Bar. The Brawler Mid comes to you as bare steel, ready to accept paint or powdercoat in the color of your choice. A powdercoat option for this item is Not currently available directly through Poison Spyder.SKU: 17-63-010-DBTP1-PSC -
Front Bumpers
JK Brawler MID Front Bumper Brawler Bar Tabs Poison Spyder – 17-63-010-DBT
JK Brawler Mid Front Bumper Brawler Bar Tabs for Jeep Wrangler JK 2007-2016. The Brawler Mid front bumper for JK is a Mid-width, high clearance bumper designed to combine off-road performance with Full features. This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
The ends of the bumper extend farther outboard than our Brawler Lite bumper, to about half the width of the tires. This provides increased brush protection for the grille corners and fenders, and gives the Jeep a more expeditionary look than our more rock-crawling specific bumpers. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- Mid-width, multi-faceted design protects lower grille and extends halfway across the front of the tires
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Brawler Bar made of 1.5 X .120 wall DOM tubing with 1.25 OD X .120 wall DOM tube gussets
- High clearance recovery shackle tabs CNC machined from 1 thick plate steel
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles.
Brawler Bar
(This part number is for the Brawler Mid without any Brawler Bar. Click Here for the Brawler Mid with Brawler Bar). The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-Notched, NC-bent 1.75 inch diameter .120 inch wall DOM tubing. The complex laser-cut Notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3/16 inch plate steel or CNC laser Notched DOM tubing.Note: Warn PowerPlant winches are Not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer).
Easy Installation
Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Mid can be mounted without cutting or altering the Jeep frame rails. The faceted design of the Brawler Mid provides the best ground clearance and approach angle possible in a bumper that does Not require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Mid Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Brawler Mid comes with provisions for re-mounting your factory fog lamps. These consist of recessed fog lamp buckets that are made of CNC laser cut DOM tubing with a mounting flange designed to accept the mounting hardware of the Stock lamps. The recess and all-steel buckets help protect the lamps from the rocks. For those who do Not have the Stock fog lamps, or would like to upgrade to more powerful LED lamps, Poison Spyder offers a unique LED Fog Lamp Mounting Kit for installing a pair of Rigid Industries Dually LED lamps in the fog lamp locations.
Important: The Stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do Not fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the Stock fog lamps.
Winch Compatibility
The Brawler Mid bumper is designed to accept Most Warn winches, and winches from other manufacturers that conform to Warn Standardized winch mounting dimensions. The winch sits in a slight depression on the top surface of the bumper, with plenty of CNC laser cut plate steel gusseting inside the bumper shell, directly underneath the winch to provide maximum strength.The Winch Fairlead Mount is sold separately, so that those who wish to Not run a winch are left with a clean looking, unobstructed top surface on their bumper. Important: installing the Warn Zeon winch on the Brawler Mid Front Bumper requires Two sets of our Zeon Winch Spacer Plates (p/n 45-57-010-03, sold separately).
Recovery Shackle Tabs
Optional Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Mid bumper.
Optional Brawler Mid Skid
The optional Brawler Mid Skid attaches to the bottom of the Brawler Mid bumper to conceal and protect the Stock crash bar, plus it has an extension to protect the electronic swaybar disconnect motor found on Rubicon JKs.The skid is made of CNC laser-cut 3/16 inch plate steel, precision brake-formed for a precise fit to the Brawler Mid front bumper.
A separate version of the Brawler Mid is available without the Brawler Bar. The Brawler Mid comes to you as bare steel, ready to accept paint or powdercoat in the color of your choice. A powdercoat option for this item is Not currently available directly through Poison Spyder. See your nearest Poison Spyder dealer for powdercoating options through a coating shop near you.SKU: 17-63-010-DBT-PSC -
Front Bumpers
JK Brawler MID Front Bumper Poison Spyder – 17-63-010
JK Brawler Mid Front Bumper for Jeep Wrangler JK 2007-2016. The Brawler Mid front bumper for JK is a Mid-width, high clearance bumper designed to combine off-road performance with Full features. This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
The ends of the bumper extend farther outboard than our Brawler Lite bumper, to about half the width of the tires. This provides increased brush protection for the grille corners and fenders, and gives the Jeep a more expeditionary look than our more rock-crawling specific bumpers. This product ships as bare steel. It will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- Mid-width, multi-faceted design protects lower grille and extends halfway across the front of the tires
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- Plate Steel Construction
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles.
Brawler Bar
(This part number is for the Brawler Mid without any Brawler Bar. Click Here for the Brawler Mid with Brawler Bar). The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-Notched, NC-bent 1.75 inch diameter .120 inch wall DOM tubing. The complex laser-cut Notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3/16 inch plate steel or CNC laser Notched DOM tubing.Note: Warn PowerPlant winches are Not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer).
Easy Installation
Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Mid can be mounted without cutting or altering the Jeep frame rails. The faceted design of the Brawler Mid provides the best ground clearance and approach angle possible in a bumper that doesn’t require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Mid Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Brawler Mid comes with provisions for re-mounting your factory fog lamps. These consist of recessed fog lamp buckets that are made of CNC laser cut DOM tubing with a mounting flange designed to accept the mounting hardware of the Stock lamps. The recess and all-steel buckets help protect the lamps from the rocks. For those who do Not have the Stock fog lamps, or would like to upgrade to more powerful LED lamps, Poison Spyder offers a unique LED Fog Lamp Mounting Kit for installing a pair of Rigid Industries Dually LED lamps in the fog lamp locations.
Important: The Stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do Not fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the Stock fog lamps.
Winch Compatibility
The Brawler Mid bumper is designed to accept Most Warn winches, and winches from other manufacturers that conform to Warn Standardized winch mounting dimensions. The winch sits in a slight depression on the top surface of the bumper, with plenty of CNC laser cut plate steel gusseting inside the bumper shell, directly underneath the winch to provide maximum strength.The Winch Fairlead Mount is sold separately, so that those who wish to Not run a winch are left with a clean looking, unobstructed top surface on their bumper. Important: installing the Warn Zeon winch on the Brawler Mid Front Bumper requires Two sets of our Zeon Winch Spacer Plates (p/n 45-57-010-03, sold separately).
Recovery Shackle Tabs
Optional Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Mid bumper.
Optional Brawler Mid Skid
The optional Brawler Mid Skid attaches to the bottom of the Brawler Mid bumper to conceal and protect the Stock crash bar, plus it has an extension to protect the electronic swaybar disconnect motor found on Rubicon JKs.The skid is made of CNC laser-cut 3/16 inch plate steel, precision brake-formed for a precise fit to the Brawler Mid front bumper.
A separate version of the Brawler Mid is available without the Brawler Bar. The Brawler Mid comes to you as bare steel, ready to accept paint or powdercoat in the color of your choice. A powdercoat option for this item is Not currently available directly through Poison Spyder. See your nearest Poison Spyder dealer for powdercoating options through a coating shop near you.SKU: 17-63-010-PSC -
Front Bumpers
SRC Carbine Front Bumper Wrangler JK 07-18 Smittybilt – 76744
A limited budget doesn Foott have to mean limited capability. The all new Carbine bumper offers Smittybilt Foots renown rugged construction while at the same time letting the cost-conscious or entry level Jeeper play with the big boys. Manufactured from 3/16 Inch cold-rolled steel and finished with the signature two-stage, matte black finish, the Carbine is fully backed by the Smittybilt Advantage Warranty.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Raised corners for better entry and exit under the most extreme conditions
- Ability to retain factory fog lights
- Solid 3/4 Inch D-ring mounts – welded on the inside and out
- Removeable bull bar 1.75 Inch .120 wall overrider and kickers
- Integrated Gen2 light mounting tabs on the bull bar Integrated winch plate fits up to 12,000lb winch, dual winch bolt pattern: 4.5 Inch x 10 Inch and 4.5 Inch x 6 Inch
- Open top and side design fits virtually all winch sizes
- Unique triangulation anchor fastens to frame in multiple locations
- Perfect mid width (57 Inch) design
SKU: n/a -
Front Bumpers
SRC Classic Front Bumper 07-18 Wrangler JK Black Textured Smittybilt – 76741
When you need the toughest, most durable bumper system out there, look to the Smittybilt Rock Crawler Series! These heavy duty bumpers are designed for off road use and abuse! Durable powder coat painted 2 tubes and 1/4 steel plate protects your front end from large rocks. Each bumper has been designed with sloping ends for greater tire travel and enhanced entry and exit.
Details:- Fits 07-2018 Wrangler JK
- Zinc Undercoated dual stage black textured power coat
- Four taps to mount lights
- Wide opening allows for winch installation
- 1/4 Inch thick custom mounting brackets
- Welded d-ring tabs
- Durable 2 Inchx.120 Inch wall over built
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
SKU: n/a -
Front Bumpers
SRC Classic Front Bumper W/Winch Plate 07-18 Wrangler JK Black Textured Smittybilt – 76743
Front BumpersSRC Classic Front Bumper W/Winch Plate 07-18 Wrangler JK Black Textured Smittybilt – 76743
Manufactured from 3/16 Inch cold rolled steel plate and will provide you the maximum protection. Available with D-rings tabs and the new Wrangler bumper is offered with a winch mount that holds up to a 10,000 lb. winch. Bumpers bolt directly to your vehicle and require minor drilling to finish installation. Two stage matte black powder coat finish with 5-year limited warranty. D-rings are not included.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage matte Black powder coat finish
- Manufactured from 3/16 Foot‹ cold rolled steel plate
- Bumpers bolt directly to your vehicle
- 5-year limited warranty
SKU: n/a -
Front Bumpers
SRC Front Stinger Bumper 07-18 Wrangler JK Black Textured Smttybilt – 76524
Smittybilt front stingers are developed and thoroughly tested in the most extreme conditions. They are hand crafted to exacting specifications using DOM 1020 2 Inch tubing which is one of the strongest materials available. Each stinger base is manufactured out of 3/16 Inch cold rolled steel with reinforced gussets and solid D-Ring mounts that are welded on the inside and outside for a maximum strength. All of the Stinger products come in the signature series Textured matte black finish and come with a 5-year limited warranty. When you Footre looking for the most ground clearance and want a stinger that can withstand the most hostile environments look to Smittybilt to provide you the very best in stinger technology.
Details:- Fits 2007-2018 Wrangler, Rubicon and Unlimited 2 and 4 door
- Textured black
- Manufactured from 2 Inch DOM 120 steel tubing and 3/16 Inch cold rolled steel
- D-ring mounts welded inside and out
- Can be used with various winch plates
- Maximum clearance for approach and departure
SKU: n/a -
Front Bumpers
SRC Gen2 Front Bumper 07-18 Wrangler JK Smittybilt – 76724
The new Smittybilt SRC front bumper has been completely redesigned with more aggressive styling and heavy duty features. The new bumper features an integrated over-rider bar and corners that extend to match the factory fender line for greater protection. The redesigned solid D-ring mounts feature an integrated recovery point for easy access. The winch plate has been placed lower for greater airflow to the radiator.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- New max solid d-ring and jack point mount – welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Fender to fender protection
- 2 Inch 120 Wall over rider and kickers
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- O.E. fog light provision
- Manufactured from 3/16 Inch cold rolled steel
- Towable D-ring mounts
- Two-stage textured matte black powdercoat finish with 5-year limited warranty
- Smittybilt Advantage limited lifetime warranty
SKU: n/a -
Front Bumpers
Tubular Bumper Front 07-18 Wrangler JK W/ Hoop Black Textured Smittybilt – JB48-FT
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight. Choose your Jeep bumpers with a polished or triple chrome-plated finish.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Front Bumper
- With Hoop
- Black Texture
- No Drill Installation
- 5-year limited warranty
SKU: n/a -
Front Bumpers
Tubular Bumper Front 07-18 Wrangler JK W/ Hoop Gloss Black Smittybilt – JB48-F
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight. Choose your Jeep bumpers with a polished or triple chrome-plated finish.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Front Bumper
- With Hoop
- Gloss Black
- No Drill Installation
- 5-year limited warranty
SKU: n/a -
Front Bumpers
Tubular Bumper Front 07-18 Wrangler JK W/ Hoop Stainless Steel Smittybilt – JB48-FS
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight. Choose your Jeep bumpers with a polished or triple chrome-plated finish.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Front Bumper
- With Hoop
- Stainless Steel
- No Drill Installation
- 5-year limited warranty
SKU: n/a -
Front Bumpers
XRC Atlas Front Bumper 07-18 Wrangler JK Smittybilt – 76892
The brand new Smittybilt XRC Atlas front bumpers are the latest and greatest products to come out of the Smittybilt RandD Department. These bumpers have gone through extensive design and testing to meet stringent international pedestrian safety standards. As a result, these bumpers are stylishly chiseled as well as being extremely strong and functional. These bumpers allow im2018sive ground clearance and can accommodate up to 37 Inch tires.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Innovative 3-piece design
- Lower design winch plate allowing greater air flow
- Two stage textured matte black finish
- Manufactured from 3/16 cold rolled steel
- Bumper bolts directly to your vehicle
- Two 3/4 Inch d-ring mounts
- 5 year limited warranty
SKU: n/a -
Front Bumpers
XRC Front Jeep JK Bumper w/ Stinger Winch Plate D-Rings 07-18 Jeep JK Wrangler Black Powdercoat Smittybilt – 76806
Front BumpersXRC Front Jeep JK Bumper w/ Stinger Winch Plate D-Rings 07-18 Jeep JK Wrangler Black Powdercoat Smittybilt – 76806
Like all Smittybilt Jeep parts, the Smittybilt XRC Bumper line was engineered to provide maximum clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance, with 3/16-inch cold rolled steel bars robotically welded to the exact specifications. A two stage textured matte black powdercoat is then applied for the ultimate look. The front stinger is manufactured from 1.75-inch tubing and has 2 light tabs that could accommodate up to two 9-inch lights. Its unique design is capable of mounting up to 10,000 lb winch with the option of running an aluminum or roller fairlead. Each bumper was developed to be a complete bolt on and requires no modifications to your vehicle.
- XRC Front Bumper
- Manufactured from 3/16 inch cold rolled steel
- Includes winch plate for up to 12k winch and D-rings
- New solid D-ring mounts – welded on the inside and out
- One-piece welded design
- 2.0 inch .120 wall overrider and kickers
- Raised corners for better entry/exit under most extreme conditions
- Solid plate center section wraps frame horns and lower crossmember
- Built-in winch plate to accommodate up to a 15k winch
- Textured Matte Black Powdercoat Finish
- Powdercoat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Sold As Each
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
SKU: n/a -
Front Bumpers
XRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Black Powdercoat Smittybilt – 77807
Front BumpersXRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Black Powdercoat Smittybilt – 77807
Like all Smittybilt Jeep parts, the Smittybilt XRC Bumper line was engineered to provide maximum clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance, with 3/16-inch cold rolled steel bars robotically welded to the exact specifications. A two stage textured matte black powdercoat is then applied for the ultimate look. The front stinger is manufactured from 1.75-inch tubing and has 2 light tabs that could accommodate up to two 9-inch lights. Its unique design is capable of mounting up to 10,000 lb winch with the option of running an aluminum or roller fairlead. Each bumper was developed to be a complete bolt on and requires no modifications to your vehicle.
- XRC Gen2 Front Bumper
- Manufactured from 3/16 inch cold rolled steel
- Includes winch plate for up to 12k winch and D-rings
- New solid D-ring mounts – welded on the inside and out
- One-piece welded design
- 2.0 inch .120 wall overrider and kickers
- Raised corners for better entry/exit under most extreme conditions
- Solid plate center section wraps frame horns and lower crossmember
- Built-in winch plate to accommodate up to a 15k winch
- Textured Matte Black Powdercoat Finish
- Powdercoat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Sold As Each
Fits:
- 2018 Jeep JL Wrangler 2 Door/4 Door
SKU: n/a -
Front Bumpers
XRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Light Texture Black Powdercoat Smittybilt – 76807LT
Front BumpersXRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Light Texture Black Powdercoat Smittybilt – 76807LT
Like all Smittybilt Jeep parts, the Smittybilt XRC Bumper line was engineered to provide maximum clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance, with 3/16-inch cold rolled steel bars robotically welded to the exact specifications. A two stage textured matte black powdercoat is then applied for the ultimate look. The front stinger is manufactured from 1.75-inch tubing and has 2 light tabs that could accommodate up to two 9-inch lights. Its unique design is capable of mounting up to 10,000 lb winch with the option of running an aluminum or roller fairlead. Each bumper was developed to be a complete bolt on and requires no modifications to your vehicle.
- XRC Gen2 Front Bumper
- Manufactured from 3/16 inch cold rolled steel
- Includes winch plate for up to 12k winch and D-rings
- New solid D-ring mounts – welded on the inside and out
- One-piece welded design
- 2.0 inch .120 wall overrider and kickers
- Raised corners for better entry/exit under most extreme conditions
- Solid plate center section wraps frame horns and lower crossmember
- Built-in winch plate to accommodate up to a 15k winch
- Light-Textured Matte Black Powdercoat Finish
- Powdercoat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Sold As Each
Fits:
- 2018 Jeep JL Wrangler 2 Door/4 Door
SKU: n/a -
Front Bumpers
XRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Tan Powdercoat Smittybilt – 76807TAN
Front BumpersXRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Tan Powdercoat Smittybilt – 76807TAN
Like all Smittybilt Jeep parts, the Smittybilt XRC Bumper line was engineered to provide maximum clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance, with 3/16-inch cold rolled steel bars robotically welded to the exact specifications. A two stage textured matte black powdercoat is then applied for the ultimate look. The front stinger is manufactured from 1.75-inch tubing and has 2 light tabs that could accommodate up to two 9-inch lights. Its unique design is capable of mounting up to 10,000 lb winch with the option of running an aluminum or roller fairlead. Each bumper was developed to be a complete bolt on and requires no modifications to your vehicle.
- XRC Gen2 Front Bumper – Tan
- Manufactured from 3/16 inch cold rolled steel
- Includes winch plate for up to 12k winch and D-rings
- New solid D-ring mounts – welded on the inside and out
- One-piece welded design
- 2.0 inch .120 wall overrider and kickers
- Raised corners for better entry/exit under most extreme conditions
- Solid plate center section wraps frame horns and lower crossmember
- Built-in winch plate to accommodate up to a 15k winch
- Tan Powdercoat Finish
- Powdercoat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Sold As Each
Fits:
- 2018 Jeep JL Wrangler 2 Door/4 Door (Tan)
SKU: n/a -
Front Bumpers
XRC Gen2 Front Bumper 07-18 Wrangler JK Smittybilt – 76807
The XRC Gen 2 Max Front Stubby Bumper has a high degree approach angle and raised corners to maximize ground clearance. The bumper is manufactured from 3/16 cold rolled steel and then robotically welded to the exact specifications. The solid D-ring mounts are welded on the inside and outside (D-rings sold separately). Welds are ground down and smoothed out, then a two stage textured matte black powder coat is applied for the ultimate look. The front stinger is 1.75 tubing and has light tabs that can hold up to two 9 Inch lights (lights sold separately). The bumper is winch ready and can carry winches up to a 10,000 lb. rating. The Gen 2 Front Bumper comes with fog light cutouts.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- Two-stage textured matte black finish
- New Gen2 solid d-ring and jack point mount – welded on the inside and out
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- 1.75 Inch 120 Wall over rider and kickers
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- O.E. fog light provision
- Manufactured from 3/16 Inch cold rolled steel
- Tow-able D-ring mounts
- Powder coat finish with 5-year limited warranty
- Smittybilt Advantage lifetime warranty
SKU: n/a -
Front Bumpers
XRC M.O.D. Center Section 07-18 Wrangler JK Black Textured Smittybilt – 76825
The all new JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The base unit was developed around our XRC platform and comes standard with a winch cradle with capacity to support up to a 15,000lb. winch. Its also equipped with D-Ring mounts that are welded on the inside and out that provides a towable anchor when pulling your rig behind a truck or motor home. Choose between our Mid or Full Width End Plate knowing that bumper clearance won Foott be sacrificed when wheeling in the harshest conditions. Then decide which over rider you prefer, you can choose between our low profile bull bar or our high point stinger.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black powder coat finish
- Built-in winch plate to accommodate up to a 15k winch
- Manufactured from 3/16 cold rolled steel
- Solid mount d-rings Weld on the inside and out
SKU: n/a -
Brush Guard
XRC M.O.D. Option Brush Guard 07-18 Wrangler JK Smittybilt – 76821
The JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The low profile bull bar protects your winch from trail obstacles and looks great on the front of your Jeep. When you purchase this part you will only receive the Bull Bar, this does not include the Modular Center Section bumper. To purchase the Bumper Center Section, look at part S/B76825.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black finish
- Manufactured from 3/16 Inch cold rolled steel
- Marine grade stainless steel hardware
- Brush guard only
- This is not the complete bumper
SKU: n/a -
Front Bumpers
XRC M.O.D. Option Bull Bar 07-18 Wrangler JK Black Textured Smittybilt – 76829
The JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The low profile bull bar protects your winch from trail obstacles and looks great on the front of your Jeep. When you purchase this part you will only receive the Bull Bar, this does not include the Modular Center Section bumper. To purchase the Bumper Center Section, look at part S/B76825.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black finish
- Marine grade stainless steel hardware
- Manufactured from 3/16 Inch cold rolled steel
- Bull Bar only
- This is not the complete bumper
SKU: n/a -
Front Bumpers
XRC M.O.D. Option Stinger 07-18 Wrangler JK Black Textured Smittybilt – 76827
The JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The Mid Width End Plate ensures that bumper clearance won Foott be sacrificed when wheeling in the harshest conditions. When you purchase this part you will only receive the Mid Width End Plates, this does not include the Modular Center Section bumper. To purchase the Bumper Center Section, look at part S/B76825.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black powder coat finish
- Marine grade stainless steel hardware
- Stinger only
- This is not the complete bumper
SKU: n/a