Category: Tire Carriers
Tags: Tire & Wheel Accessories, Tire & Wheels, Tire Carriers
Brand: Smittybilt
Tire Carriers
Pivot HD Tire Carrier for 07-18 Jeep Wrangler JK Smittybilt – 2843
The Smittybilt SRC Oversize Tire Carrier is the most economical way to mount an over sized tire onto your Jeep Wrangler JK.
Details:
- Fits 2007 to 2016 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Strong monocoque aluminum construction eliminates tailgate sag
- Adjustable tire mount with 37 Inch maximum tire size
- Increases load carrying capacity of 135 lbs
- Forged chrome mounting brackets ย?ยรยรถ 30 percent stronger than steel
- Third brake light mount included
- Protective EPDM gaskets included to protect factory finish
- S/B2740-03 optional brackets to mount trail jack
- Maintains the easy single action of opening and closing of the tailgate
- No drilling required – you can maintain OE bumpers, if preferred
$524.99
Related products
-
Tire Carriers
DV8 Offroad TCSTTB-06-HKJT Add On Tire Carrier RS-10 / RS-11
The TC-6 is a tire carrier that extends from the bumper (RS-10 and RS-11) to the Jeep’s rear tailgate. Much like the DV8 RS-2 it opens along with the tailgate in 1 step rather than the 2 step process of opening a standard swing away tire carrier. This carrier is designed to bolt onto your existing RS-10 or 11 bumper so that if you are on a budget you can purchase the bumper and then the tire carrier. It is precisely CNC laser cut with a multitude of mounting points so that you can get creative with your hi-lift jack, gas and water cans, or whatever else you like to bring with you. After the laser cutter cuts the pieces it is then sent to be expertly welded and sent off to powdercoat. The final product is a solid tire carrier that can handle the load of any Jeep adventure.
Features:- TC-6 Tire Carrier
- Black Powdercoat
- Fits 2007-2018 Jeep JK Wrangler
- Sold as a Kit
Note:
- This tire carrier attaches to the RS-10 and RS-11
SKU: TCSTTB-06 -
Element Ramps
All Element Ramps Mud/ Snow/ Sand Traction Aids Pair Smittybilt – 2790
The Cloak Extended Mesh Top gives you the best of both worlds; reduces the heat and glare of the sun while allowing the cool air to flow through the unique mesh design. Manufactured out of durable long lasting PVC coated mesh material, UV treated material. Easy and quick install no other hardware required.
Details:- Fits 2007 to 2018 JK Wrangler Unlimited and Rubicon Unlimited
- 2-door models
- Black mesh
- Extended Mesh Top only
- Easy install no tools needed
- No header required
- Stays on with hard or soft top installed
- Reduces wind noise
- Installs with heavy-duty bungee cords
- UV and mildew resistant
- Durable long lasting PVC coated mesh material
- Reduces the heat and glare of the sun while allowing cool air to flow through
- Rear and sides sold separately part S/B95501
SKU: n/a -
Tire Carriers
Jeep JL Pivot HD Tire Carrier 37 Inch Max 2018 2/4 Door Black PC Smittybilt – 7743
Smittybilt is proud to introduce their new Pivot Heavy Duty Oversized Tire Carrier and Tailgate Reinforcement System that is engineered to hold up to a 37-inch spare tire. The monoblock aluminum construction is combined with forged chromoly mounting brackets for the ultimate in strength to eliminate tailgate sagging and rattles, even while holding up to 135 pounds. The new Pivot Heavy Duty Oversized Tire Carrier triangulates the tailgate mounting and body tub hinge points using existing mounting holes to distribute loads across a wide area while maintaining the easy single action opening and closing of the tailgate.
- Pivot HD Oversize Tire Carrier
- Maintains easy single action of opening and closing of the tailgate
- Strong monoblock aluminum construction eliminates tailgate sag
- Adjustable tire mount with 37 inch maximum tire size
- Increases load carrying capacity of 135 lbs
- Forged chrome mounting brackets are 30 percent stronger than steel
- Protective EPDM gaskets included to protect factory finish
- Hardened hinge points
- Third brake light mount included
- No drilling required – you can maintain OE bumpers, if preferred
- Mounting points for brackets to mount trail jack (sold separately)
- Black Powdercoat Finish
- Sold As Each
Fits:
- 2018 Jeep Wrangler JL 2-Door/4-Door
SKU: n/a -
Tire Carriers
3-Way Spare Tire Strap Poison Spyder – 57-63-001
The Poison Spyder 3-Way Spare Tire Strap securely holds the spare tire in place during the Most rigorous four-wheeling. This strap was designed for use with the Poison Spyder Rear Stinger Tire Carrier, but can be used with other DIY-fabricated spare tire mounts or to simply tie the spare tire down into the bed of the vehicle.
The use of a strap allows virtually infinite adjustability for any size tire, while allowing quick, easy access to the spare tire without having to use any extra tools. All of these reasons are why similar straps are routinely used for spare tire hold-down duty in off-road racing.
Heavy duty ratchet lets you easily adjust, tighten and release tension. Made of high quality nylon webbing with an embroidered Poison Spyder tag.SKU: 57-63-001-PSC -
Tire Carriers
Slant Mount for XRC Tire Carrier Jeep JK Black Powdercoat Smittybilt – 76857-05
Spare tire carriers in their conventional, upright positions are a necessity for every Jeeper, whether on the road or off, but when the terrain gets extreme and your standard hard top comes off, Smittybilt’s new Slant Back Tire Carrier Kit allows you to move your spare tire into an aggressive, 45 degree pre-runner position.
- Slant Tire Carrier Adapter Kit
- Designed for use with Smittybilt’s XRC Gen2 Bolt-On Tire Carrier (P/N 76857), Cargo Restraint System (C.RES), or JK Bowless Tops
- Manufactured from 3/16 inch cold rolled steel, weighs 8 lbs
- 1 inch diameter hardened pin
- Easy, bolt-on installation
- All hardware included
- Compatible with Rotopax gas/water can and off-road jack mounts, if used with XRC Gen2 Bolt-on Tire Carrier (P/N 76857)
- Matte Black Powdercoat Finish
- 5-Year Limited Warranty On Powdercoat
- Lifetime Limited Warranty On Structure
- Sold As A Kit
Please Note:
- Combination of Pivot Tire Carrier (P/N 2843) and Slant Adapter (P/N 76857-05) is not compatible with Smittybilt Slant Hard Top (P/N 518702 or P/N 517702)
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
SKU: n/a
