SKU: FBSHTB-14
Category: Front Bumpers
Tags: Bumpers, Bumpers & Armor, Exterior Parts & Car Care, Front Bumpers
Brand: DV8 Offroad
-21%
Front Bumpers
DV8 Offroad FBSHTB-14-HKJT Front Bumper w/Fog Lights And LED 07-18 Wrangler JK/JL
Our Hammer Forged front bumpers were designed and built with hardcore wheeling in mind. Inspired by King of the Hammers style racing and crawling these bumpers are designed to perform on the rocks where you need protection the most. All of our Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel.
The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4 inch steel while others are made of 3/16 inch steel depending on the amount of abuse that each part is likely to take. The result is a lighter, stronger bumper that is ready to take on the toughest challenges that you will throw at your Jeep.
Features:
- Hammer Forged Front Bumper
- Mesh insert for running the bumper without an LED
- Fog light holes for factory or aftermarket fog lights
- Mid-Length for better protection of fender and grill area
- .170 wall stinger
- High clearance
- Meets with the factory frame
- D-Rings included
- Patent Pending
- Fits 2007-2018 Jeep Wrangler JK
- Fits 2018 Jeep Wrangler JL
- Sold as Each
Note:
- Will not work with the 2018 Rock Hard Edition Fog Light
- LED Light Bar Mounting intergrated into the Bumper Optional
$441.13 $560.41
Related products
-
Front Bumpers
JK Brawler Lite Front Bumper Tabs Poison Spyder – 17-59-010-D
0 out of 5(0)JK Brawler Lite Front Bumper Tabs for Jeep Wrangler JK 2007-2016. The Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with Full features.
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- High clearance recovery shackle tabs
- CNC machined from 1 thick plate steel
Plate Steel Construction
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles.
Brawler Bar
The Brawler Bar is modeled after the bar found on our original RockBrawler front bumper. It is a low-profile stinger designed to provide protection to the winch, grille and radiator area. The Brawler Bar is made of CNC laser-Notched, NC-bent 1.75 inch diameter .120 inch wall DOM tubing. The complex laser-cut Notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. Two gusset styles are offered for strengthening the Brawler Bar. CNC laser-cut brake-formed 3/16 inch plate steel or CNC laser Notched DOM tubing. Note: Warn PowerPlant winches are Not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer).
Easy Installation
Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeep frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesn’t require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Brawler Lite comes with built-in, recessed fog lamp mounts that are designed to easily accept your Stock fog lamps. And these are Not just simple light tabs placed behind a hole in the bumper they are recessed in a bucket made of a Full tubular section to encircle the lamp and keep light from annoyingly leaking behind and around the bumper.Adding further convenience are mounting holes for re-installing the harness retainer clips for the factory wiring, to keep the wiring neatly secured. If you would like a lot more power than the factory fog lamps provide, you can opt to install a set of Rigid Industries Dually or D2 Dually LED lamps using our JK Fog Light Mounts for Rigid Industries Dually/D2.
Important: The Stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do Not fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the Stock fog lamps.
Winch Compatibility
The Brawler Lite top-mounted, integrated winch mount is part of the Fully boxed, internally gusseted bumper shell. Winches that are mounted inside the bumper lose this box strength as well as the strength of internal gussets.The Brawler Lite is designed to accept Most Warn and other brand winches that use the popular 10 inch X 4.5 inch mounting pattern, with a few small exceptions. Warn Powerplant winches fit the Brawler Lite with Brawler Bar and Plate Gussets just fine, however it will require slight modifications to use this winch with the Tube Gusset variant. Mounting the Warn Zeon winches requires our Zeon Winch Spacer Plates. See the FAQ section below for further information on both of these winches.
Recovery Shackle Tabs
Optional Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.Separate versions of the Brawler Lite are available without the Brawler Bar or with the Trail Stinger. The Brawler Lite comes to you as bare steel, ready to accept paint or powdercoat in the color of your choice. A powdercoat option for this item is Not currently available directly through Poison Spyder.
SKU: 17-59-010-D-PSC$548.99 -
Front Bumpers
SRC Front Stinger Bumper 07-18 Wrangler JK Black Textured Smttybilt – 76524
0 out of 5(0)Smittybilt front stingers are developed and thoroughly tested in the most extreme conditions. They are hand crafted to exacting specifications using DOM 1020 2 Inch tubing which is one of the strongest materials available. Each stinger base is manufactured out of 3/16 Inch cold rolled steel with reinforced gussets and solid D-Ring mounts that are welded on the inside and outside for a maximum strength. All of the Stinger products come in the signature series Textured matte black finish and come with a 5-year limited warranty. When you Footre looking for the most ground clearance and want a stinger that can withstand the most hostile environments look to Smittybilt to provide you the very best in stinger technology.
Details:- Fits 2007-2018 Wrangler, Rubicon and Unlimited 2 and 4 door
- Textured black
- Manufactured from 2 Inch DOM 120 steel tubing and 3/16 Inch cold rolled steel
- D-ring mounts welded inside and out
- Can be used with various winch plates
- Maximum clearance for approach and departure
SKU: n/a$439.99 -
Front Bumpers
JK Front Bumper Kit Explorer 07-Pres Wrangler JK TeraFlex
0 out of 5(0)%3Cp%3EThe+TeraFlex+JK+front+Explorer+bumper+is+designed+as+an+ultra-minimal+but+functional+accessory.+andnbsp%3BThis+bumper+will+fit+all+major+winch+models+with+standard+bolt+pattern%2C+including+the+larger+Warn+Powerplant.+andnbsp%3BIntegrated+D-Ring+mounts+aid+with+recovery+equipment.+The+Explorer+bumper+also+allows+the+use+of+the+factory+fog+lights+to+retain+factory+styling+and+technology.%3Cbr+%2F%3E%3Cstrong%3EFits%3A%3C%2Fstrong%3E%3C%2Fp%3E%0A%3Cul%3E%0A%3Cli%3E07-Present+Jeep+Wrangler+JK%3C%2Fli%3E%0A%3Cli%3E07-Present+Jeep+Wrangler+Unlimited+JK%3C%2Fli%3E%0A%3C%2Ful%3E%0A%3Cp%3E%3Cstrong%3EDetails%3A%3C%2Fstrong%3E%3C%2Fp%3E%0A%3Cul%3E%0A%3Cli%3ED-rings+mount+from+inside+or+outside+of+bumper%3C%2Fli%3E%0A%3Cli%3ESteel+w%2Ftextured+black+powder+coat+finish%3C%2Fli%3E%0A%3Cli%3E100+Percent+bolt-on+install+in+1.5+hours%3C%2Fli%3E%0A%3Cli%3EFactory+fog+lights+retain+factory+style+and+technology%3C%2Fli%3E%0A%3Cli%3ELifetime+defect+warranty%2F90+day+powder+coat+warranty%3C%2Fli%3E%0A%3C%2Ful%3E%0A
SKU: 4653120-FNNT$437.94$460.99 -
Front Bumpers
JK Brawler Lite Front Bumper Trail Stinger Poison Spyder – 17-59-010-ST
0 out of 5(0)JK Brawler Lite Front Bumper Trail Stinger for Jeep Wrangler JK 2007-2016. The Brawler Lite front bumper for JK is a grille-width, high clearance bumper designed to combine hard core off-road performance with Full features. This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles. This product ships as bare steel. It will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- Trail Stinger made of 1.5 X .120 wall DOM tubing with 1.25 OD X .120 wall DOM tube gussets
Plate Steel Construction
This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but Not far enough to hinder tire clearance or tire access to vertical obstacles.
Trail Stinger
The Trail Stinger used on this version of the Brawler Lite is modeled after the famous Trail Stinger originally developed and popularized by Poison Spyder. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger is made of CNC laser-Notched, NC-bent 1.75 inch diameter .120 inch wall DOM tubing.The complex laser-cut Notch allows the Brawler Bar to be welded to two different planes on the surface of the bumper, providing incredible strength. The Trail Stinger is fortified by a pair of 1.25 inch diameter .120 inch wall DOM tube gussets. Note: Warn PowerPlant winches are Not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer). Brawler Lite is also available with the Brawler Bar or with no bar/stinger.
Easy Installation
Unlike the Poison Spyder BFH series bumpers for JK, the Brawler Lite can be mounted without cutting or altering the Jeep frame rails. The faceted design of the Brawler Lite provides the best ground clearance and approach angle possible in a bumper that doesn’t require frame modifications. The factory Crash Bar may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, we recommend adding the Brawler Lite Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect.
Recessed Fog Lamp Mounts
Brawler Lite comes with built-in, recessed fog lamp mounts that are designed to easily accept your Stock fog lamps. And these are Not just simple light tabs placed behind a hole in the bumper they are recessed in a bucket made of a Full tubular section to encircle the lamp and keep light from annoyingly leaking behind and around the bumper. Adding further convenience are mounting holes for re-installing the harness retainer clips for the factory wiring, to keep the wiring neatly secured. If you’d like a lot more power than the factory fog lamps provide, you can opt to install a set of Rigid Industries Dually or D2 Dually LED lamps using our JK Fog Light Mounts for Rigid Industries Dually/D2.
Important: The Stock fog lamps used on the Jeep Wrangler 10th Anniversary Rubicon do Not fit into the fog lamp buckets on this bumper. If installing this bumper on a 10th Anniversary Rubicon, we suggest using a pair of Rigid Industries Dually or Dually D2 LED lamps along with our JK Dually Fog Lamp Mounts instead of the Stock fog lamps.
Winch Compatibility
The Brawler Lite top-mounted, integrated winch mount is part of the Fully boxed, internally gusseted bumper shell. Winches that are mounted inside the bumper lose this box strength as well as the strength of internal gussets. The Brawler Lite is designed to accept Most Warn and other brand winches that use the popular 10 inch X 4.5 inch mounting pattern, with a few small exceptions. Warn Powerplant winches fit the Brawler Lite with Brawler Bar and Plate Gussets just fine, however it will require slight modifications to use this winch with the Tube Gusset variant. Mounting the Warn Zeon winches requires our Zeon Winch Spacer Plates. See the FAQ section below for further information on both of these winches.
Recovery Shackle Tabs
Optional Recovery Shackle Tabs are modeled after the high clearance tabs designed for our hard core BFH series bumpers. These tabs are angle to provide maximum approach angle. They are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles. Selecting this option will get you a pair of these tabs, expertly welded to the Brawler Lite bumper.
Separate versions of the Brawler Lite are available with no bar or with the Brawler Bar.The Brawler Lite comes to you as bare steel, ready to accept paint or powdercoat in the color of your choice. A powdercoat option for this item is Not currently available directly through Poison Spyder.
SKU: 17-59-010-ST-PSC$598.99 -
Front Bumpers
SRC Carbine Front Bumper Wrangler JK 07-18 Smittybilt – 76744
0 out of 5(0)A limited budget doesn Foott have to mean limited capability. The all new Carbine bumper offers Smittybilt Foots renown rugged construction while at the same time letting the cost-conscious or entry level Jeeper play with the big boys. Manufactured from 3/16 Inch cold-rolled steel and finished with the signature two-stage, matte black finish, the Carbine is fully backed by the Smittybilt Advantage Warranty.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Raised corners for better entry and exit under the most extreme conditions
- Ability to retain factory fog lights
- Solid 3/4 Inch D-ring mounts – welded on the inside and out
- Removeable bull bar 1.75 Inch .120 wall overrider and kickers
- Integrated Gen2 light mounting tabs on the bull bar Integrated winch plate fits up to 12,000lb winch, dual winch bolt pattern: 4.5 Inch x 10 Inch and 4.5 Inch x 6 Inch
- Open top and side design fits virtually all winch sizes
- Unique triangulation anchor fastens to frame in multiple locations
- Perfect mid width (57 Inch) design
SKU: n/a$369.99