Category: Tire Carriers
Tags: Bumpers, Bumpers & Armor, Exterior Parts & Car Care, Rear Bumpers, Spare Tire Carrier, Spare Tire Mount
Brand: Smittybilt
Tire Carriers
Slant Mount for XRC Tire Carrier Jeep JK Black Powdercoat Smittybilt – 76857-05
Spare tire carriers in their conventional, upright positions are a necessity for every Jeeper, whether on the road or off, but when the terrain gets extreme and your standard hard top comes off, Smittybilt’s new Slant Back Tire Carrier Kit allows you to move your spare tire into an aggressive, 45 degree pre-runner position.
- Slant Tire Carrier Adapter Kit
- Designed for use with Smittybilt’s XRC Gen2 Bolt-On Tire Carrier (P/N 76857), Cargo Restraint System (C.RES), or JK Bowless Tops
- Manufactured from 3/16 inch cold rolled steel, weighs 8 lbs
- 1 inch diameter hardened pin
- Easy, bolt-on installation
- All hardware included
- Compatible with Rotopax gas/water can and off-road jack mounts, if used with XRC Gen2 Bolt-on Tire Carrier (P/N 76857)
- Matte Black Powdercoat Finish
- 5-Year Limited Warranty On Powdercoat
- Lifetime Limited Warranty On Structure
- Sold As A Kit
Please Note:
- Combination of Pivot Tire Carrier (P/N 2843) and Slant Adapter (P/N 76857-05) is not compatible with Smittybilt Slant Hard Top (P/N 518702 or P/N 517702)
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
$149.99
Related products
-
Tire Carriers
XRC Tailgate and Tire Carrier Jeep JK/JKU Wrangler 07-18 2 Door/4 Door Up To 37 Inch Tire Black Powdercoat Smittybilt – 76410
Tire CarriersXRC Tailgate and Tire Carrier Jeep JK/JKU Wrangler 07-18 2 Door/4 Door Up To 37 Inch Tire Black Powdercoat Smittybilt – 76410
0 out of 5(0)The new Smittybilt XRC Tailgate with tire carrier uses an OE bolt configuration, cast steel hinge points and a hardened steel pin to eliminate tailgate sag forever! Manufactured from 14-gauge steel with a durable light texture finish, this product bolts on with no drilling or cutting required. The XRC Tailgate features integrated tie down points, roof access steps, a bottle opener and can be installed with Smittybilt or factory bumpers. Designed and engineered in California.
- XRC Tailgate w/ Tire Carrier
- Heavy-duty construction to support up to a 37 inch tire
- Pre-drilled holes for factory handles and latch transfer
- Rigged cast steel hinge points and 1 inch hardened pin eliminate tailgate sag
- Step and built-in bottle opener
- Includes third brake light
- Direct bolt-on installation
- Can be used with XRC Tire Carrier or Slant Tire Carrier Adapter (76857 and 76857-05)
- Textured Matte Black Powdercoat Finish
- 5-Year Limited Warranty on Powdercoat
- Lifetime Limited Warranty on Structure
- Sold As Each
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
SKU: n/a$549.99 -
Tire Carriers
Pivot HD Tire Carrier for 07-18 Jeep Wrangler JK Smittybilt – 2843
0 out of 5(0)The Smittybilt SRC Oversize Tire Carrier is the most economical way to mount an over sized tire onto your Jeep Wrangler JK.
Details:- Fits 2007 to 2016 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Strong monocoque aluminum construction eliminates tailgate sag
- Adjustable tire mount with 37 Inch maximum tire size
- Increases load carrying capacity of 135 lbs
- Forged chrome mounting brackets Β?ΒΓΒΓΆ 30 percent stronger than steel
- Third brake light mount included
- Protective EPDM gaskets included to protect factory finish
- S/B2740-03 optional brackets to mount trail jack
- Maintains the easy single action of opening and closing of the tailgate
- No drilling required – you can maintain OE bumpers, if preferred
SKU: n/a$524.99 -
Rear Bumpers
JK BFH II Rear Bumper Tabs Lights Poison Spyder – 17-17-021-DL
0 out of 5(0)JK BFH II Rear Bumper Tabs Lights for Jeep Wrangler JK 2007-2016. Poison Spyder BFH II Rear Bumpers are designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally Built For the Hammers with the best ground clearance and departure angle possible. It is no wider than the Jeep JK Wrangler rear body tub, with angled facets to improve its ability to slide over the rocks while still protecting the corner of the tub from drop-offs and ledges.
This version of the BFH II features CNC machined high clearance recovery shackle tabs. For the ultimate in strength and durability, pair it with the JK BFH II Rear Crossmember.
Features:- Low profile faceted design for high clearance of trail obstacles
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- High clearance recovery shackle tabs CNC machined from 1 thick plate steel
- Mounts for dual recessed 6 LED light bars
- Installation requires cutting/trimming of Jeep frame rails and rear crossmember
Plate Steel Construction
The BFH II Rear Bumper is CNC laser-cut from high strength 3/16 inch plate steel, then precision brake-formed for an exact fit. In keeping with its minimalist design parameter, the BFH II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire used.
High Clearance and Departure Angle
The faceted plate steel design of the JK BFH II Rear Bumper provides the Most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and Stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the Stock rear crossmember. At the installers discretion, the Stock rear crossmember may be plated across the open cut (materials to do this are Not included), or the crossmember removed completely.
Optional Replacement Crossmember
If the Stock crossmember is removed completely, it may be replaced with the JK BFH II Rear Crossmember (Note that there are versions of the BFH II Crossmember with or without a receiver hitch-this particular version of the BFH II Rear Bumper is specificaly designed to work with the non-receiver version-it will Not work with the crossmember that has the integrated hitch receiver (p/n 17-17-030).
High Clearance Shackle Tabs
The JK BFH II Rear Bumper includes heavy duty, high clearance Recovery Shackle Tabs. These tabs were CAD designed specifically for use with this bumper, with a high-clearance design to minimize loss of departure angle and to handle sliding off of rocks rather than hanging up on them. The tabs are CNC machined from 1 inch thick plate steel to provide a secure attachment point for 3/4 inch recovery shackles (sold separately).Notes: Installation requires cutting of Stock frame rails! Please read through the Installation Instructions so that you are Fully aware of the modifications required to your Jeep frame rails, before purchasing. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
SKU: 17-17-021-DL-PSC$469.99 -
Tire Carriers
DV8 Offroad TCSTTB-01-HKJT Tire Carrier 07-18 Jeep Wrangler
0 out of 5(0)The DV8 body mounted tire carrier provides a high clearance tire mounting solution that is all about function. This tire carrier features:
Features:- 1,75 inch diameter steel tubing allows for a large array of tube clamps for mounting aftermarket accessories like Hi-Lift Jacks, LED Lights etc.
- Mounts to the body at 4 points which allows for a strong, rattle free construction.
- The latching system uses hitch pins for excellent security and strength
- This carrier can be run with ANY aftermarket bumper for the JK
- Holds the tire tighter to the body for better departure angles
- Will fit any bolt pattern wheel
- Includes a license plate relocation bracket and a cover for the old license plate mount
- The DV8 Dimple Dye plates are removable.
- Comes powdercoated DV8 textured black
- Will work with aftermarket quarter panel guards
- Our unique cam style adjustment makes adjusting the tire carrier simple and easy
- Accommodates up to a 42 inch Spare tire
- Fits: 2007-2018 Jeep Wrangler
Note:
- Installation requires some drilling
- Will accommodate up to a 13.5 inch wide tire
- Factory Wheels will need to be mounted backwards
SKU: TCSTTB-01$588.41$650.00 -
Tire Carriers
DV8 Offroad JLTS-01-HKJT Spare Tire Delete Kit 18-Present Wrangler JL
0 out of 5(0)JLTS-01 2018to present Jeep JL Spare Tire Delete Kit. The DV8 Offroad JLTS-01 fits over the raised vent area in the center of the tailgate. These are very useful for those who have deleted or relocated the spare tire.
CNC-laser cut from 3/16 inch steel the plate comes powder coated in a textured black finish with a license plate light and installs easily using the stock tire carrier mounting bolts.
Installing the tramp stamp requires removal of the stock air vent flaps, so that it may sit flat against the tailgate for a clean appearance.
Key Features:- 3/16 steel plate
- Comes powder coated in a textured black finish
SKU: JLTS-01$68.48$76.48