SRC Gen2 Rear Bumper 07-18 Wrangler JK Smittybilt – 76614

JK BFH II Rear Bumper Tabs for Jeep Wrangler JK 2007-2016. Poison Spyder BFH II Rear Bumpers are designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally Built For the Hammers with the best ground clearance and departure angle possible. It is no wider than the Jeep JK Wrangler rear body tub, with angled facets to improve its ability to slide over the rocks while still protecting the corner of the tub from drop-offs and ledges.

This version of the BFH II features CNC machined high clearance recovery shackle tabs. For the ultimate in strength and durability, pair it with the JK BFH II Rear Crossmember.
Features:
Low profile faceted design for high clearance of trail obstacles
CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
High clearance recovery shackle tabs CNC machined from 1 thick plate steel
Installation requires cutting/trimming of Jeep frame rails and rear crossmember
Plate Steel Construction
The BFH II Rear Bumper is CNC laser-cut from high strength 3/16 and plate steel, then precision brake-formed for an exact fit. In keeping with its minimalist design parameter, the BFH II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire used.
High Clearance & Departure Angle
The faceted plate steel design of the JK BFH II Rear Bumper provides the Most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and Stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the Stock rear crossmember. At the installer discretion, the Stock rear crossmember may be plated across the open cut (materials to do this are Not included), or the crossmember removed completely.
Optional Replacement Crossmember
If the Stock crossmember is removed completely, it may be replaced with the JK BFH II Rear Crossmember (Note that there are versions of the BFH II Crossmember with or without a receiver hitch-this particular version of the BFH II Rear Bumper is specificaly designed to work with the non-receiver version-it will Not work with the crossmember that has the integrated hitch receiver (p/n 17-17-030).
High Clearance Shackle Tabs
The JK BFH II Rear Bumper includes heavy duty, high clearance Recovery Shackle Tabs. These tabs were CAD designed specifically for use with this bumper, with a high-clearance design to minimize loss of departure angle and to handle sliding off of rocks rather than hanging up on them. The tabs are CNC machined from 1 inch thick plate steel to provide a secure attachment point for 3/4 inch recovery shackles (sold separately).

Notes: Installation requires cutting of Stock frame rails! Please read through the Installation Instructions so that you are Fully aware of the modifications required to your Jeep frame rails, before purchasing. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.

JK BFH II Rear Bumper Receiver Tabs for Jeep Wrangler JK 2007-2016. Poison Spyder BFH II Rear Bumpers are designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally Built For the Hammers with the best ground clearance and departure angle possible. It is no wider than the Jeep JK Wrangler rear body tub, with angled facets to improve its ability to slide over the rocks while still protecting the corner of the tub from drop-offs and ledges.

This version of the BFH II features CNC machined high clearance recovery shackle tabs. For the ultimate in strength and durability, pair it with the JK BFH II Rear Crossmember.
Features:
Low profile faceted design for high clearance of trail obstacles
CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
High clearance recovery shackle tabs CNC machined from 1 thick plate steel
Slot for hitch receiver (requires p/n 17-17-030)
Installation requires cutting/trimming of Jeep frame rails and rear crossmember

Plate Steel Construction
The BFH II Rear Bumper is CNC laser-cut from high strength 3/16 inch plate steel, then precision brake-formed for an exact fit. In keeping with its minimalist design parameter, the BFH II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire used.
High Clearance and Departure Angle
The faceted plate steel design of the JK BFH II Rear Bumper provides the Most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and Stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the Stock rear crossmember. At the installers discretion, the Stock rear crossmember may be plated across the open cut (materials to do this are Not included), or the crossmember removed completely.
Optional Replacement Crossmember
If the Stock crossmember is removed completely, it may be replaced with the JK BFH II Rear Crossmember (Note that there are versions of the BFH II Crossmember with or without a receiver hitch-this particular version of the BFH II Rear Bumper is specificaly designed to work with the non-receiver version-it will Not work with the crossmember that has the integrated hitch receiver (p/n 17-17-030).
High Clearance Shackle Tabs
The JK BFH II Rear Bumper includes heavy duty, high clearance Recovery Shackle Tabs. These tabs were CAD designed specifically for use with this bumper, with a high-clearance design to minimize loss of departure angle and to handle sliding off of rocks rather than hanging up on them. The tabs are CNC machined from 1 inch thick plate steel to provide a secure attachment point for 3/4 inch recovery shackles (sold separately).

Notes: Installation requires cutting of Stock frame rails! Please read through the Installation Instructions so that you are Fully aware of the modifications required to your Jeep frame rails, before purchasing. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.

JK RockBrawler Rear Bumper for Jeep Wrangler JK 2007-2016.
Features:

• Low profile faceted design for high clearance of trail obstacles; recessed back-up light buckets for 2.5 inch LED lamps (sold separately)
• CNC laser-cut, precision brake-formed 3/16 plate steel construction
• Allows use of the factory or aftermarket tow hitch
• Notch/step allows clearance for spare tires on Stock or aftermarket body-mounted carriers

Multi-Faceted Design
The RockBrawler Rear Bumpers high clearance, multi-faceted design provides the best possible departure angles and corner obstacle clearance. Its appearance is streamlined and sexy, Not like the squarish, boxy shape of many other bumpers on the market. The RockBrawler is constructed of CNC laser cut, brake-formed 3/16 inch plate steel. The multiple bends and facets actually lend even more strength to the bumper design.

Unlike the Poison Spyder BFH Rear Bumper for JK, the RockBrawler Rear Bumper can be mounted without cutting or altering the Jeep frame rails.
Recessed Back-Up Lamps
Very few JK rear bumpers come with provisions for mounting backup lamps. Of those that do, fewer still allow the use of high intensity, low power drawing LED lamps. The RockBrawler Rear Bumper recessed light buckets accept 2.5 inch Round, Clear LED Lamps, the same backup lamps we have sold with our Crusher Corners.

The recessed buckets protect them from the rocks and direct light rearward rather than into the bumper interior, the way some competitor bracket-mounted lamps do. Customers may choose to wire them into the reverse light circuit, or wire them to a separate dash switch as a loading or utility light. Important: Note that the LED Lamps do Not come with this bumper, they must be purchased separately.
Works with Existing Equipment
The RockBrawler Rear Bumper is designed to work with your existing OE tow hitch. Unlike the integrated hitches found on competitor’s bumpers, the OE hitch is designed for and safely rated for towing. And best of all, its easily removable. So those who need a sturdy hitch for towing can still use the Stock one, while those who need the extra clearance for hard core off-roading can easily remove it.

The RockBrawler Rear Bumper has a built-in step/recess to provide easy access to the rear of the Jeep as well as clearance for the spare tire. This bumper may be used with the Stock spare tire carrier and up to a 35 inch tire. For those looking for a complete bumper/tire carrier system, check out the RockBrawler Rear Bumper with Tire Carrier.
Rock Solid Mounting
The JK RockBrawler Rear Bumper incorporates an extra set of mounting bolts, along the bottom of the bumper which fasten into the rear crossmember. Combined with the mounting flange bolts at either side, the bumper is rigidly fastened by a total of 8 Grade 8 bolts, on three different planes to provide ultimate strength and rigidity to the mounted bumper.
Recovery Shackle Tabs
The optional Heavy Duty Recovery Shackle Tabs are CNC machined from 1 inch thick steel billet, specifically designed to accept our heavy duty 3/4 inch Recovery Shackles.

These tabs are designed to match the high clearance aspects of the rest of the bumper and minimized hang-ups. Selecting this option will get you a pair of these tabs, expertly welded to the RockBrawler Rear Bumper.
This product ships as bare steel. It will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.