HitchLink 2.5 Reciever Shackle Mount 2.5 Inch Receivers Anodized Gray Factor 55
For Class V hitch receivers. Our truck owners asked and we listened. No need to Sleeve Class V hitch receivers to weaker Class III and Class IV. Finally a hitch receiver shackle mount designed for Class V receivers. Only available in Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
The HitchLink 2.5 will accept both 3/4 and 7/8 shackles. It can be oriented inside the hitch receiver allowing the shackle tab to be parallel to the bumper or vertical depending on its desired need. It also eliminates the need to use a receiver sleeve to downsize your receiver to a 2 inch adapter. Rated at 18,000 lbs. Ultimate Failure at 69,000 lbs. Use your receiver as a recovery tow point.
Features:
- Color: Hard Anodized Gray
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 3.6 lbs pounds
- Rated at 18000 pounds
- Ultimate failure at 69,000 pounds
- Fits standard Class V 2.5 inch receivers
- Fits common 7/8 inch pin) and 7/8 inch (1 inch pin) screw pin shackles/D-rings
- Available in the Military Specification Anodizing (Mil-A-8625 F Type III) Gray
- Cross drilled hitch pin attachment (vertical or horizontal shackle pin axis)
- Made in USA
Warning:
- Never exceed factory receiver hitch pull rating
- Always use a quality steel alloy 5/8 inch hitch pin
- Always pull in line with the hitch, do not bind or side load the shackle
$113.95 $119.95
Related products
-
Winch Shackle
UltraHook Winch Hook W/Shackle Mount Gray Factor 55
The world’s safest winch hook. Featuring Industry first Closed System Shackle Mount hole machined into the body of the hook, safety latch retraction pocket resulting in a clear throat opening, integrated secondary safety latch locking feature-latch locking pin stored in the body of the UltraHook which can be removed and inserted in to the hook tip, locking the latch into place.
EPDM rubber pads for fairlead protection, titanium double shear pin, and a finger grip feature that promotes proper Hook Up orientation. The first winch hook that can be stored against your fairlead protecting either your hawse or roller style fairlead from a metal to metal connection.
Features:- Color: Gray
- The industry’s first winch hook with an integrated shackle pin mount
- Two methods of use: conventional hook opening, or shackle mount
- Shackle pin mount allows the safer practice of Closed System Winching
- Finger grip feature promotes proper Hook Up orientation
- Double locking safety clasp – lock the safety clasp with the included clevis pin
- Latch lock clevis pin stored conveniently in hook body
- Integrated EPDM rubber pads for fairlead surface protection
- Max opening deformation clearly laser engraved
- Lightweight – Precision CNC machined 7000 series Military Grade Aluminum
- No rope splicing required – double shear pin design accepts rope/cable eyes
- Designed for both steel cables and synthetic winch ropes
- Foldable to stow rattle free against fairleads
- Shackle pin mounting hole accepts 3/4 shackle pins (.875 inch diameter)
- For rope and cable diameters up to 3/8 inch
- Available in the Military Specification Hard Anodizing (Mil-A-8625 F Type III) Gray
- 5/8 inch diameter 6AI-4V grade V titanium double shear pin
- Max Rated Load: 16,000 pounds
- Ultimate Strength – Hook Throat Opening: 31,000 pounds
- Ultimate Strength – Shackle Pin Mount: 48,000 pounds
- Weight: 32oz
- Made in USA
SKU: 00250-06-GGBW -
Winch Shackle
UltraHook Winch Hook W/Shackle Mount Red Factor 55
The world’s safest winch hook. Featuring Industry first Closed System Shackle Mount hole machined into the body of the hook, safety latch retraction pocket resulting in a clear throat opening, integrated secondary safety latch locking feature-latch locking pin stored in the body of the UltraHook which can be removed and inserted in to the hook tip, locking the latch into place.
EPDM rubber pads for fairlead protection, titanium double shear pin, and a finger grip feature that promotes proper Hook Up orientation. The first winch hook that can be stored against your fairlead protecting either your hawse or roller style fairlead from a metal to metal connection.
Features:- Color: Red
- The industry’s first winch hook with an integrated shackle pin mount
- Two methods of use: conventional hook opening, or shackle mount
- Shackle pin mount allows the safer practice of Closed System Winching
- Finger grip feature promotes proper Hook Up orientation
- Double locking safety clasp – lock the safety clasp with the included clevis pin
- Latch lock clevis pin stored conveniently in hook body
- Integrated EPDM rubber pads for fairlead surface protection
- Max opening deformation clearly laser engraved
- Lightweight – Precision CNC machined 7000 series Military Grade Aluminum
- No rope splicing required – double shear pin design accepts rope/cable eyes
- Designed for both steel cables and synthetic winch ropes
- Foldable to stow rattle free against fairleads
- Shackle pin mounting hole accepts 3/4 shackle pins (.875 inch diameter)
- For rope and cable diameters up to 3/8 inch
- Available in the Military Specification Hard Anodizing (Mil-A-8625 F Type III) Gray
- 5/8 inch diameter 6AI-4V grade V titanium double shear pin
- Max Rated Load: 16,000 pounds
- Ultimate Strength – Hook Throat Opening: 31,000 pounds
- Ultimate Strength – Shackle Pin Mount: 48,000 pounds
- Weight: 32oz
- Made in USA
SKU: 00250-01-GGBW -
Winch Shackle
FlatLink Winch Shackle Mount Assembly Red Factor 55
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.
Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment.
The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips.
The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. The FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.
Features:- Color: Red
- Precision machined from 6000 series aluminum
- Compatible with all roller fairlead license plate mounting brackets
- When folded flat – less than 1.75 inches of thickness
- Weight – 23 ounces
- Max load rating : 16,000 pounds
- Ultimate failure : greater than 40,000 pounds
- Fits steel cables and synthetic winch ropes to 3/8 inch diameters
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage.
- Simple snap ring removal for shear pin.
- Fits common 3/4 shackles/D-Rings
- Eliminates hook rattle and fairlead damage
- Made In USA
SKU: 00050-01-GGBW -
Winch Shackle
ProLink Bridle Shackle Mount Assembly Anodized Gray Factor 55
The ProLink Bridle provides winch owners with a means to replace the conventional winch hook with a safer and stronger screw pin shackle/D-ring.The ProLink Bridle is a multiple shackle mount product designed for winch cables. The ProLink Bridle is a specialized commercial product designed primarily for the towing industry.
The three individual shackle mounting holes allow the winch operator to mount fixed length bridle links to the outside positioned holes for common bridle towing, as well as a single centered shackle mounting point for a conventional single shackle recovery point. Dedicated shackle mounting points prevent dangerous shackle side loading conditions due to the pivoting feature of the shackle pin mounting hole. This allows for Closed System Winching techniques to be applied.
For commercial high repeating bridle towing, dedicated self centering shackles result in a safer means to bridle tow. This ProLink Bridle operation is similar to fish plate towing used in the ship towing industry where boat yaw is undesirable. Like all models in the ProLink family, the ProLink Bridle is engineered and made in the USA from 6000 series billet aluminum and is equipped with a 6Al-4V titanium double shear pin. The ProLink Bridle is only available in the Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
Features:- Color: Anodized Gray
- Machined from 6000 series billet aluminum.
- 5/8 diameter Titanium double shear pin
- 4.5 inches tall, 5.25 inches in wide, 3.5 inch base diameter
- Working Load Limit of 16,000 pounds
- Ultimate failure of greater than 42,000 pounds
- Fits all steel cables and synthetic ropes up to 3/8inch diameter
- EPDM Rubber Guard protects alloy Hawse fairleads and cushions line stowage
- Simple snap ring shear pin retainment
- Made in the USA
SKU: 00220-06-GGBW -
Winch Shackle
FlatLink E Expert Version Winch Shackle Mount Assembly Anodized Gray Factor 55
The FlatLink E (Expert) is a variation of our popular foldable standard FlatLink winch shackle mount. The FlatLink E provides a means to eliminate the conventional winch hook and replace it with a safer and more secure screw pin shackle resulting in a Closed System Winching operation.
The large pear shaped shackle mounting hole allows for attachment to either the pin or bow end of common screw pin shackles, as well as common OEM recovery points. This makes the new FlatLink E more versatile than the current FlatLink design, but it also adds the possibility of a dangerous shackle side loading condition (See Picture), especially during momentary slack conditions. A shackle side loading condition is not possible with our standard
FlatLink shackle mount due to the shackle pin mounting constraint. For the recreational off roader we highly recommend the safer standard FlatLink product, not the FlatLink E. This way the winch operator does not have to monitor whether the shackle may have shifted and rotated in the recovery tackle.
The FlatLink E is only available in the Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to their secure screw pin attachment. The FlatLink E does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink E by a 5/8 inch diameter 6Al4V
Titanium double shear pin and internal snap ring. Installation takes only minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink E with 4 barbed tips each. The FlatLink E stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles.
Features:- Color: Anodized Gray
- Made in the USA
- Precision machined from 6000 series billet aluminum
- Compatible with all roller fairlead license plate mounting brackets
- When folded flat – less than 1.75 inches of thickness
- Weight – 26 ounces
- Max load rating : 16,000 pounds
- Ultimate failure : greater than 40,000 pounds
- Fits steel cables and synthetic winch ropes to 3/8 inch diameters
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage
- Simple snap ring removal for shear pin
- Fits common 3/4 shackles/D-Rings
- Eliminates hook rattle and fairlead damage
SKU: 00080-06-GGBW
