HitchLink 2.0 Reciever Shackle Mount 2 Inch Receivers Red Factor 55
Hitchlink 2.0 Reciever Shacle Mount. Use your receiver as a recovery tow point.
Features:
- Color: Red
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 1.9 pounds. Steel versions weigh up to 8 pounds
- Rated at 9500 pounds
- Ultimate failure at 51,000 pounds
- Fits standard 2 inch receivers
- Fits common 3/4 screw pin shackles/D-Rings
- Anodized or powder coated for oxidation protection
- Made in USA
Warning:
- Never exceed factory receiver hitch pull rating
- Always use a quality steel alloy 5/8 inch hitch pin
- Always pull in line with the hitch, do not bind or side load the shackle
$75.95 $79.95
Related products
-
Winch Shackle
UltraHook Winch Hook W/Shackle Mount Gray Factor 55
0 out of 5(0)The world’s safest winch hook. Featuring Industry first Closed System Shackle Mount hole machined into the body of the hook, safety latch retraction pocket resulting in a clear throat opening, integrated secondary safety latch locking feature-latch locking pin stored in the body of the UltraHook which can be removed and inserted in to the hook tip, locking the latch into place.
EPDM rubber pads for fairlead protection, titanium double shear pin, and a finger grip feature that promotes proper Hook Up orientation. The first winch hook that can be stored against your fairlead protecting either your hawse or roller style fairlead from a metal to metal connection.
Features:- Color: Gray
- The industry’s first winch hook with an integrated shackle pin mount
- Two methods of use: conventional hook opening, or shackle mount
- Shackle pin mount allows the safer practice of Closed System Winching
- Finger grip feature promotes proper Hook Up orientation
- Double locking safety clasp – lock the safety clasp with the included clevis pin
- Latch lock clevis pin stored conveniently in hook body
- Integrated EPDM rubber pads for fairlead surface protection
- Max opening deformation clearly laser engraved
- Lightweight – Precision CNC machined 7000 series Military Grade Aluminum
- No rope splicing required – double shear pin design accepts rope/cable eyes
- Designed for both steel cables and synthetic winch ropes
- Foldable to stow rattle free against fairleads
- Shackle pin mounting hole accepts 3/4 shackle pins (.875 inch diameter)
- For rope and cable diameters up to 3/8 inch
- Available in the Military Specification Hard Anodizing (Mil-A-8625 F Type III) Gray
- 5/8 inch diameter 6AI-4V grade V titanium double shear pin
- Max Rated Load: 16,000 pounds
- Ultimate Strength – Hook Throat Opening: 31,000 pounds
- Ultimate Strength – Shackle Pin Mount: 48,000 pounds
- Weight: 32oz
- Made in USA
SKU: 00250-06-GGBW$237.45$249.95 -
Winch Shackle
HitchLink 2.0 Reciever Shackle Mount 2 Inch Receivers Silver Factor 55
0 out of 5(0)Hitchlink 2.0 Reciever Shacle Mount. Use your receiver as a recovery tow point.
Features:- Color: Silver
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 1.9 pounds. Steel versions weigh up to 8 pounds
- Rated at 9500 pounds
- Ultimate failure at 51,000 pounds
- Fits standard 2 inch receivers
- Fits common 3/4 screw pin shackles/D-Rings
- Anodized or powder coated for oxidation protection
- Made in USA
Warning:
- Never exceed factory receiver hitch pull rating
- Always use a quality steel alloy 5/8 inch hitch pin
- Always pull in line with the hitch, do not bind or side load the shackle
SKU: 00020-05-GGBW$75.95$79.95 -
Winch Shackle
ProLink Bridle Shackle Mount Assembly Anodized Gray Factor 55
0 out of 5(0)The ProLink Bridle provides winch owners with a means to replace the conventional winch hook with a safer and stronger screw pin shackle/D-ring.The ProLink Bridle is a multiple shackle mount product designed for winch cables. The ProLink Bridle is a specialized commercial product designed primarily for the towing industry.
The three individual shackle mounting holes allow the winch operator to mount fixed length bridle links to the outside positioned holes for common bridle towing, as well as a single centered shackle mounting point for a conventional single shackle recovery point. Dedicated shackle mounting points prevent dangerous shackle side loading conditions due to the pivoting feature of the shackle pin mounting hole. This allows for Closed System Winching techniques to be applied.
For commercial high repeating bridle towing, dedicated self centering shackles result in a safer means to bridle tow. This ProLink Bridle operation is similar to fish plate towing used in the ship towing industry where boat yaw is undesirable. Like all models in the ProLink family, the ProLink Bridle is engineered and made in the USA from 6000 series billet aluminum and is equipped with a 6Al-4V titanium double shear pin. The ProLink Bridle is only available in the Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
Features:- Color: Anodized Gray
- Machined from 6000 series billet aluminum.
- 5/8 diameter Titanium double shear pin
- 4.5 inches tall, 5.25 inches in wide, 3.5 inch base diameter
- Working Load Limit of 16,000 pounds
- Ultimate failure of greater than 42,000 pounds
- Fits all steel cables and synthetic ropes up to 3/8inch diameter
- EPDM Rubber Guard protects alloy Hawse fairleads and cushions line stowage
- Simple snap ring shear pin retainment
- Made in the USA
SKU: 00220-06-GGBW$189.95$199.95 -
Winch Shackle
HitchLink 2.0 Reciever Shackle Mount 2 Inch Receivers Gray Factor 55
0 out of 5(0)Hitchlink 2.0 Reciever Shacle Mount. Use your receiver as a recovery tow point.
Features:- Color: Gray
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 1.9 pounds. Steel versions weigh up to 8 pounds
- Rated at 9500 pounds
- Ultimate failure at 51,000 pounds
- Fits standard 2 inch receivers
- Fits common 3/4 screw pin shackles/D-Rings
- Anodized or powder coated for oxidation protection
- Made in USA
Warning:
- Never exceed factory receiver hitch pull rating
- Always use a quality steel alloy 5/8 inch hitch pin
- Always pull in line with the hitch, do not bind or side load the shackle
SKU: 00020-06-GGBW$75.95$79.95 -
Winch Shackle
HitchLink 2.5 Reciever Shackle Mount 2.5 Inch Receivers Anodized Gray Factor 55
0 out of 5(0)For Class V hitch receivers. Our truck owners asked and we listened. No need to Sleeve Class V hitch receivers to weaker Class III and Class IV. Finally a hitch receiver shackle mount designed for Class V receivers. Only available in Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
The HitchLink 2.5 will accept both 3/4 and 7/8 shackles. It can be oriented inside the hitch receiver allowing the shackle tab to be parallel to the bumper or vertical depending on its desired need. It also eliminates the need to use a receiver sleeve to downsize your receiver to a 2 inch adapter. Rated at 18,000 lbs. Ultimate Failure at 69,000 lbs. Use your receiver as a recovery tow point.
Features:- Color: Hard Anodized Gray
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 3.6 lbs pounds
- Rated at 18000 pounds
- Ultimate failure at 69,000 pounds
- Fits standard Class V 2.5 inch receivers
- Fits common 7/8 inch pin) and 7/8 inch (1 inch pin) screw pin shackles/D-rings
- Available in the Military Specification Anodizing (Mil-A-8625 F Type III) Gray
- Cross drilled hitch pin attachment (vertical or horizontal shackle pin axis)
- Made in USA
Warning:
- Never exceed factory receiver hitch pull rating
- Always use a quality steel alloy 5/8 inch hitch pin
- Always pull in line with the hitch, do not bind or side load the shackle
SKU: 00022-06-GGBW$113.95$119.95