HitchLink 2.0 Reciever Shackle Mount 2 Inch Receivers Gray Factor 55

Replace conventional winch hooks with the new safer, stronger, and smarter Factor 55 ProLink shackle mount. Factor 55 introduces the new ProLink shackle mount for winch cables and synthetic ropes. Engineered and machined in the USA from lightweight billet 6061 aluminum, the ProLink provides a safe means to easily attach a standard 3/4 inch screw pin shackle to existing winch cable and rope eyes

The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8 inch double shear pin. The front of the ProLink provides the precision shackle mounting hole and massive 1.2 inch thick mounting tab.

The ProLink is compatible with both Hawse and Roller fairleads and snugs neatly against both versions.
Product Specifications:

• Color: Silver
• Screw pin shackles are up to 5X stronger than conventional winch hooks
• Conventional hooks are too small to safely fit both ends of a recovery strap
• Recover straps cannot slip out of a shackle like they can with hooks
• Hook safety latches are not rated for loads and can tear recovery straps
• Conventional hook surfaces add higher stresses to recovery strap fibers, resulting in decreased strap ratings
• Shackles can be quickly removed and stowed away until needed for winching.
• Hooks do not cinch neatly against fairleads and are prone to rattling and loosening
• Conventional winch hooks are designed for chains – not commonly used recovery straps
• Engineered, Tested, and Made in USA — Patent Pending
• Stress analyzed using COSMOS FEA and destructively tested for confirmation
• Billet construction — precision machined from 6061-T6 Kaiser Aluminum round bar
• 16,000 pound max load rating
• Fits all steel cables and synthetic ropes up to 3/8 inch in diameter
• Fits eyes equipped with standard or tube thimbles to 3/8 inch diameters
• 1.2 inch shackle tab thickness virtually eliminates shackle rattle
• 5/8 inch diameter 6Al-4V titanium double shear pin
• Optional EPDM Rubber Guard protects alloy Hawse fairleads — rubber barb attachment
• Can be installed and removed in minutes — simple snap ring removal
• Cinches neatly against all types of fairleads — Hawse or Roller
• Beautifully anodized and zinc plated in the USA

Hitchlink 2.0 Reciever Shacle Mount. Use your receiver as a recovery tow point.
Features:

• Color: Silver
• Lightweight precision CNC machined 6000 series aluminum
• Weighs only 1.9 pounds. Steel versions weigh up to 8 pounds
• Rated at 9500 pounds
• Ultimate failure at 51,000 pounds
• Fits standard 2 inch receivers
• Fits common 3/4 screw pin shackles/D-Rings
• Anodized or powder coated for oxidation protection
• Made in USA

Warning:

• Never exceed factory receiver hitch pull rating
• Always use a quality steel alloy 5/8 inch hitch pin
• Always pull in line with the hitch, do not bind or side load the shackle

ProLink Expert. Replace conventional winch hooks with a safer more secure shackle/D-ring. Lightweight, Precision CNC machined 6000 series aluminum. No splicing required, titanium double shear pin design.

Designed for both steel cables and synthetic winch ropes. Integrated EPDM rubber boot for fairlead protection. Connects to either the pin or bow end of common 3/4 inch screw pin shackles. Connects to the pin ends of 7/8 inch and 1 inch screw pin shackles. Fits over most OEM tow hooks.
Warning: Keep forces in line. Do not side load shackle

Features:

• Color: Black
• For rope and cable diameters up to 3/8 inch
• Fits common 3/4 inch screw pin shackles/D-rings
• Mil-Spec anodized or powder coated
• 5/8 inch diameter 6AI-4V titanium double shear pin
• Max Load: 16,000 pounds
• Ultimate Strength: 40,000 pounds
• Weight: 30oz