JEEP LIGHTING
Showing 1–32 of 111 results
-
Off Road Lights
100 Watt 5×7 Offroad Light Pro Comp Suspension
Our number one, all-around performer. A high-powered light easily adaptable to Grille guards, pro-runner front bumpers, and many original equipment mount locations. A stylish 5×7 rectangular configuration available in high-gloss black with hard plastic cover. Quartz/halogen 100-watt H3 bulb. Wiring Harness sold separately. Lights sold individually.
Details:- Finish: Black
- Quartz/halogen 100 watt H3 bulb
- Our number one, all-around performer
- A high-powered light easily adaptable to many mounting locations
- Stylish 5 Inchx7 Inch rectangular configuration
- Sold As: Single
SKU: 9101-PRO -
Brake lights
2-1/2 LED Back-Up Light Clear Poison Spyder – 41-04-300
2.5 Inch LED Back-Up Light Clear. 2.5 inch flush mount LED back-up light for use with Poison Spyder Customs Crusher Corners, Trail Corners or any other manufacturer corner protectors, or anywhere you can cut a 2.75 inch hole in a flat sheetmetal panel. push-in mounting with the included rubber grommet. Sold by each, if you need a pair specify a quantity of 2.
SKU: 41-04-300-PSC -
Brake lights, Wiring and Hardware
2-Pin LED Flasher 76-96 CJ-YJ Poison Spyder – 41-04-262
2-Pin LED Flasher for 1976-1996 Jeep Wrangler CJ-YJ. Electronic flasher to provide proper current intermittent for LED taillights and turn signals in your 1976-1996 Jeep CJ or YJ. Easy to install (instructions included).
SKU: 41-04-262-PSC -
Brake lights
24in LED Back-Up Light Extension Harness (Pair) Poison Spyder – 41-06-020
24 Inch Back-Up Light Extension Harness (Pair). Poison Spyder JK LED Taillight Harness system is the easy, plug-and-play answer to getting all of your Jeep Wrangler JKs rear LED lighting working quickly and correctly. It is designed to connect directly to your Jeep OE wiring harness, and directly to LED taillights, back-up lights, and license plate lights sold by Poison Spyder.
Exclusive Plug-N-Play Design
Poison Spyder wiring harness system is designed to take all of the guesswork, hassle and labor out of wiring aftermarket LED taillights, back-up lights and license plate/third brake lights on your 2007 and later Jeep Wrangler JK. The two main harness components, to which the other components connect in order to accommodate your Jeep customized rear lighting setup. The JK LED Taillight HarnessDriver Side is typically used on the driver side and does Not include provisions for the license plate light. The JK LED Taillight Harness – Passenger Side is typically used on the passenger side, and includes a 6-foot lead and weatherproof connector for our LED License Plate and 3rd Brake Light – PSC Connectors. You will need two of these JK LED Taillight Harnesses, typically one of each type, for Most configurations. Each of these Taillight Harnesses plug right into your Jeep factory wiring harnesssimply unplug the Stock taillight pigtail and plug the Poison Spyder taillight harness in its place. OEM quality connectors provide a positive, weather-tight connection just like the factory wiring. Weatherproof connectors are used for all other connections as well as automotive quality wires and split-loom protective sheathing. Once the Poison Spyder taillight harnesses are in place, several LED lighting products may be plugged directly into the harness or connected via jumper harnesses.
Supports 4 inch Round LED Taillights
Both driver and passenger side Poison Spyder taillight harnesses include the correct 3-prong connector to plug directly into the 4 inch Round, 24-diode LED Stop/Turn/Tail Lights sold by Poison Spyder. Each taillight harness also incorporates a load resistor to simulate the correct power load so turn signals will flash at the correct speed and to keep the vehicle computer from throwing an error code. No longer must these load resistors be wired in separately with wire taps and butt connectors.Note: The LED taillight connector is designed to work with the 4 inch round LED Taillights sold by Poison Spyder only. It is Not guaranteed to fit any other brand or model of taillight.
Supports 2.5 inch Round LED Back-Up Lamps
Both driver and passenger side Poison Spyder taillight harnesses include Two weather-tight connectors for connecting up to two 2.5 inch Round LED Back-Up Lamps per side, for a total of four such lamps. Typical configurations using Poison Spyder JK Crusher Corners and/or bumpers may include such Back-Up Lamps directly below each LED taillight, in the recessed Back-Up Lamp buckets found on many of our rear bumpers, or both. To connect to Back-Up Lamps located directly below the LED taillights on Poison Spyder JK Crusher Corners, simply use the 4 inch Back-Up Light Extension Harness on each side.To connect to Back-Up Lamps located in the recessed mounts on many Poison Spyder JK Rear Bumpers, use the 24 Inch Back-Up Light Extension Harness on each side. Remember, there are two Back-Up Lamp connectors on each taillight harness, in order to accommodate both a 4 inch and a 24 Inch Back-Up Light Extension Harness on each side simultaneously. Both of these connectors are wired into the vehicle back-up lamp circuit. If you wish to divert one pair of these lamps to use as manually switched load or work lights, you’ll have to research and make the necessary alterations to the harness and the vehicle wiring on your own.
Note: The LED Back-Up Lamp Extension Harnesses are designed to work with the 2.5 Round LED Back-Up Lamps sold by Poison Spyder only. They are Not guaranteed to fit any other brand or model of lamp.
Supports LED License Plate and Third Brake Light
The passenger side Poison Spyder taillight harness includes a 6-foot lead with weather-tight connector to connect to our LED License Plate and 3rd Brake Light – PSC Connectors. On Most Jeep JKs on which Poison Spyder Crusher Corners and LED taillights have been installed, the license plate has been relocated from the Stock position on the driver side corner. In Most cases it has been relocated either to the spare tire carrier or to the center of the tailgate on those Jeeps where the spare tire has been removed altogether.In either case, the 6-foot lead on the passenger side LED taillight harness can be routed either through the tailgate or along the tire carrier, and plugged into the LED License Plate and Third Brake Light at the relocated license plate. On those Jeeps where no license plate light is needed or it has already been addressed elsewhere, the lead for the license plate light can be simply coiled up and secured inside the Jeep body corner cavity, secured with some zip-ties.
Note: The license plate lead is designed to work with the LED License Plate and 3rd Brake Light PSC Connectors sold by Poison Spyder only. It is Not guaranteed to fit any other brand or model of license plate light or third brake light.
SKU: 41-06-020-PSC -
LED Light Pods
2X2 Square 5W LED Flood Pair Pro Comp Suspension
The new Explorer Series high intensity LED light from Pro Comp sets the standard in lighting efficiency. All Explorer Series LED lights feature a 50,000 + hour life span, ultra-high lumens/watt, in a durable IP 67 housing and shockproof 3800 polyester powder coat case. Installation is easy, and every Explorer light comes with everything you need to get your light installed and wired: wiring harness, switch, relay, and 2 sets of mounting brackets and mounting hardware.
The innovative design provides increased visibility in even the darkest of driving conditions. Whether you’re close to home, or far off the beaten path, count on Explorer to light the way!
Details:- Mounting Type: Universal
- Beam Pattern: Flood
- Color: Clear
- Amp Draw: 1.36/12V 0.68/24V
- 20 Watts
- 3.25wx3.75hx3.1d
- 3800 Polyester Powder Coat
- Shock Resistant
- Raw Lumens: 1,830 Per Light
- Pair Pack
SKU: 76406P-PRO -
LED Light Pods
2X2 Square 5W LED Spot Pair Pro Comp Suspension
The new Explorer Series high intensity LED light from Pro Comp sets the standard in lighting efficiency. All Explorer Series LED lights feature a 50,000 + hour life span, ultra-high lumens/watt, in a durable IP 67 housing and shockproof 3800 polyester powder coat case. Installation is easy, and every Explorer light comes with everything you need to get your light installed and wired: wiring harness, switch, relay, and 2 sets of mounting brackets and mounting hardware.
The innovative design provides increased visibility in even the darkest of driving conditions. Whether you’re close to home, or far off the beaten path, count on Explorer to light the way!
Details:- Mounting Type: Universal
- Beam Pattern: Spot
- Color: Clear
- Amp Draw 1.37/12V 0.68/24V
- 12 Watts
- 3.25wx3.75hx3.1d
- 3800 Polyester Powder Coat
- Shock Resistant
- IP 67
- 830 Raw Lumens
- Pair Pack
SKU: 76407P-PRO -
-
-
-
-
-
Side Marker Lights
3/4 LED Marker Lamp 3-Wire Amber Poison Spyder – 41-04-085
3/4 LED Marker Lamp 3-Wire Amber. 3/4 inch round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you’d like to mount them by drilling a 3/4 inch hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal And a marker lamp simultaneously.
It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair).
This item is also available in red or clear/amber.
Important: This item is Not intended as a direct replacement for any Stock turn signal or marker lamp. It does Not plug directly into the vehicle wiring harness it will require cutting and splicing into the vehicle wiring harness.
Features:- 3/4 high intensity LED
- 3-wire design to function as turn signal, marker lamp, or both
- Amber lens
- Install in any flat panel with a 3/4 hole
Requires cutting and splicing into vehicle wiring harness
SKU: 41-04-085-PSC -
Side Marker Lights
3/4 LED Marker Lamp 3-Wire Clear/Amber Poison Spyder – 41-04-080
3/4 LED Marker Lamp 3-Wire Clear/Amber. 3/4 inch round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you’d like to mount them by drilling a 3/4 inch hole in a flat panel.
This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair).
This item is also available in red or clear/amber.
Important: This item is Not intended as a direct replacement for any Stock turn signal or marker lamp. It does Not plug directly into the vehicle wiring harness it will require cutting and splicing into the vehicle wiring harness.
Features:- 3/4 high intensity LED
- 3-wire design to function as turn signal, marker lamp, or both
- Clear lens with Amber diode
- Install in any flat panel with a 3/4 hole
- Requires cutting and splicing into vehicle’s wiring harness
SKU: 41-04-080-PSC -
Side Marker Lights
3/4 LED Marker Lamp 3-Wire Red Poison Spyder – 41-04-070
3/4 Inch LED Marker Lamp 3-Wire Red. 3/4 inch round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you would like to mount them by drilling a 3/4 inch hole in a flat panel. This is a 3-Wire assembly, meaning it can be used as both a turn signal And a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair).
This item is also available in red or clear/amber.
Important: This item is Not intended as a direct replacement for any Stock turn signal or marker lamp. It does Not plug directly into the vehicle wiring harness it will require cutting and splicing into the vehicle wiring harness.
Features:- 3/4 high intensity LED
- 3-wire design to function as turn signal, marker lamp, or both
- Red lens
- Install in any flat panel with a 3/4 inch hole
- Requires cutting and splicing into vehicle wiring harness
SKU: 41-04-070-PSC -
Brake lights
4 24-LED Taillight Push-In with Pigtail & Grommet Clear/Red Poison Spyder – 41-04-051
4 24-LED Taillight Push-In with Pigtail and Grommet Clear/Red. These 24-diode LED taillights easily install using a rubber grommet they simply push into place. This is a 4 inch round light (requires a 4.5 inch hole) with red lens.
Flush-mount LED taillights stay out of the way of rocks and trees on the trail, last longer and shine brighter than OEM incandescent lamps. Available with red or clear lens (make your selection in the options) units with clear lenses use red diodes, so they still flash red when lit up.
These install right into Poison Spyder Customs Crusher Corners or Trail Corners (on units specifically ordered for LED taillights), or can be installed into other manufacturer corner protectors or anywhere you can cut a 4.5 inch round hole in a flat panel.
Includes the LED lamp assembly, rubber grommet and wiring pigtail harness. Sold each (order 2 if you need a pair).SKU: 41-04-051-PSC -
Brake lights
4 24-LED Taillight Push-In with Pigtail & Grommet Red Poison Spyder – 41-04-050
4 24-LED Taillight Push-In with Pigtail and Grommet Red. These 24-diode LED taillights easily install using a rubber grommet they simply push into place. This is a 4 inch round light (requires a 4.5 inch hole) with red lens.
Flush-mount LED taillights stay out of the way of rocks and trees on the trail, last longer and shine brighter than OEM incandescent lamps. Available with red or clear lens (make your selection in the options) units with clear lenses use red diodes, so they still flash red when lit up.
These install right into Poison Spyder Customs Crusher Corners or Trail Corners (on units specifically ordered for LED taillights), or can be installed into other manufacturer corner protectors or anywhere you can cut a 4.5 inch round hole in a flat panel.
Includes the LED lamp assembly, rubber grommet and wiring pigtail harness. Sold each (order 2 if you need a pair).SKU: 41-04-050-PSC -
Brake lights
4 6-LED Taillight Flange Style Poison Spyder – 41-04-036
4 6-LED Taillight Flange Style. 6-diode flush mount LED taillight with red lens for use with Poison Spyder Customs Crusher Corners, Trail Corners or any other manufacturer corner protectors, or anywhere you can cut a 4.5 inch hole in a flat sheet metal panel. Flange-mounting style, red lens.
Sold by each, if you need a pair specify a quantity of 2.
SKU: 41-04-036-PSC -
Off Road Lights
4 Inch HID Floodlight w/Stone Guard Pro Comp Suspension
HID Off Road Lighting from Explorer Pro Comp will light your way with confidence and clarity. We took super bright High Intensity Discharge bulbs and packaged them in a rugged, high strength package to provide an efficient and powerful beam that can withstand the rigors of off road abuse. Explorer HID are fully self-contained, and include internal ballast, waterproof connections, and a multi-directional mounting base. Each light contains pre-terminated wiring harness, relay, impact resistant stone guards and illuminated dash switch. More light means better visibility and faster reaction times. Don’t be left in the dark!
Details:- HID Flood
- 35 Watt
- 4 inch diameter by 5.75 inch deep
- Black
- Clear and Amber Stone Guards
- Internal Ballast
- Wiring Harness
- Off-Road Use Only
SKU: 9640-PRO -
Off Road Lights
4 Inch HID Spot Light w/Stone Guard Pro Comp Suspension
HID Off Road Lighting from Explorer Pro Comp will light your way with confidence and clarity. We took super bright High Intensity Discharge bulbs and packaged them in a rugged, high strength package to provide an efficient and powerful beam that can withstand the rigors of off road abuse. Explorer HID are fully self-contained, and include internal ballast, waterproof connections, and a multi-directional mounting base. Each light contains pre-terminated wiring harness, relay, impact resistant stone guards and illuminated dash switch. More light means better visibility and faster reaction times. Don’t be left in the dark!
Details:- HID Spot
- 35 Watt
- 4 inch
- Black
- Clear and Amber Stone Guards
- Internal Ballast
- Wiring Harness
- Off-Road Use Only
SKU: 9641-PRO -
-
-
-
Brake lights
4in LED Back-Up Light Extension Harness (Pair) Poison Spyder – 41-06-030
4in LED Back-Up Light Extension Harness (Pair) Poison Spyder’s JK LED Taillight Harness system is the easy, plug-and-play answer to getting all of your Jeep Wrangler JKs rear LED lighting working quickly and correctly.
It is designed to connect directly to your Jeep OE wiring harness, and directly to LED taillights, back-up lights, and license plate lights sold by Poison Spyder.
Exclusive “Plug-N-Play” Design
Poison Spyder’s wiring harness system is designed to take all of the guesswork, hassle and labor out of wiring aftermarket LED taillights, back-up lights and license plate/third brake lights on your 2007 and later Jeep Wrangler JK. The two main harness components, to which the other components connect in order to accommodate your Jeep customized rear lighting setup. The JK LED Taillight Harness – Driver Side is typically used on the driver’s side and does Not include provisions for the license plate light.The JK LED Taillight Harness – Passenger Side is typically used on the passenger side, and includes a 6-foot lead and weatherproof connector for our LED License Plate & 3rd Brake Light – PSC Connectors. You will need two of these JK LED Taillight Harnesses, typically one of each type, for Most configurations. Each of these Taillight Harnesses plug right into your Jeep factory wiring harnesssimply unplug the Stock taillight pigtail and plug the Poison Spyder taillight harness in its place. OEM quality connectors provide a positive, weather-tight connection just like the factory wiring.
Weatherproof connectors are used for all other connections as well as automotive quality wires and split-loom protective sheathing. Once the Poison Spyder taillight harnesses are in place, several LED lighting products may be plugged directly into the harness or connected via jumper harnesses.
Supports 4″ Round LED Taillights
Both driver and passenger side Poison Spyder taillight harnesses include the correct 3-prong connector to plug directly into the 4″ Round, 24-diode LED Stop/Turn/Tail Lights sold by Poison Spyder. Each taillight harness also incorporates a load resistor to simulate the correct power load so turn signals will flash at the correct speed and to keep the vehicle’s computer from throwing an error code. No longer must these load resistors be wired in separately with wire taps and butt connectors.NotE: The LED taillight connector is designed to work with the 4″ round LED Taillights sold by Poison Spyder only. It is Not guaranteed to fit any other brand or model of taillight.
Supports 2-1/2 inch Round LED Back-Up Lamps
Both driver and passenger side Poison Spyder taillight harnesses include TWO weather-tight connectors for connecting up to two 2-1/2 inch Round LED Back-Up Lamps per side, for a total of four such lamps. Typical configurations using Poison Spyder JK Crusher Corners and/or bumpers may include such Back-Up Lamps directly below each LED taillight, in the recessed Back-Up Lamp buckets found on many of our rear bumpers, or both. To connect to Back-Up Lamps located directly below the LED taillights on Poison Spyder JK Crusher Corners, simply use the 4″ Back-Up Light Extension Harness on each side.To connect to Back-Up Lamps located in the recessed mounts on many Poison Spyder JK Rear Bumpers, use the 24″ Back-Up Light Extension Harness on each side. Remember, there are two Back-Up Lamp connectors on each taillight harness, in order to accommodate both a 4″ and a 24″ Back-Up Light Extension Harness on each side simultaneously. Both of these connectors are wired into the vehicle’s back-up lamp circuit. If you wish to divert one pair of these lamps to use as manually switched load or work lights, you’ll have to research and make the necessary alterations to the harness and the vehicle’s wiring on your own.
Note: The LED Back-Up Lamp Extension Harnesses are designed to work with the 2-1/2 inch Round LED Back-Up Lamps sold by Poison Spyder only. They are Not guaranteed to fit any other brand or model of lamp.
Supports LED License Plate & Third Brake Light
The passenger side Poison Spyder taillight harness includes a 6-foot lead with weather-tight connector to connect to our LED License Plate & 3rd Brake Light – PSC Connectors. On Most Jeep JKs on which Poison Spyder Crusher Corners and LED taillights have been installed, the license plate has been relocated from the Stock position on the driver’s side corner. In Most cases it has been relocated either to the spare tire carrier or to the center of the tailgate on those Jeeps where the spare tire has been removed altogether. In either case, the 6-foot lead on the passenger side LED taillight harness can be routed either through the tailgate or along the tire carrier, and plugged into the LED License Plate & Third Brake Light at the relocated license plate. On those Jeeps where no license plate light is needed or it has already been addressed elsewhere, the lead for the license plate light can be simply coiled up and secured inside the Jeep body’s corner cavity, secured with some zip-tiesNote: The license plate lead is designed to work with the LED License Plate & 3rd Brake Light – PSC Connectors sold by Poison Spyder only. It is Not guaranteed to fit any other brand or model of license plate light or third brake light.
SKU: 41-06-030-PSC -
-
Fog Lights
55 Watt 4 x 6 Fog Lights Pro Comp Suspension
You get two Clear Driving Lights, plus complete wiring and switch kit, in one high-performance package. These lights are 55 watt quartz/halogen bulbs for enhanced efficiency. The Pro Comps unique multi-position mount facilitates installation and positioning available for these driving light lenses in black ABS housings. *Light actually measures 3.5 Inchx6
Details:- Finish: Black
- Two lights, plus complete wiring and switch kit, in one high-performance package
- Lights are 55-watt quartz/halogen bulbs for enhanced efficiency
- Pro Comp’s unique multi-position mount facilitates installation and positioning
SKU: 9200-PRO -
Off Road Lights
55 Watt 5 Inch Flutedt Light Black Pro Comp Suspension
High-performance, very compact light for hard-to-fit Grille guards and light tabs, as well as other challenging locations. Super slim 5 diameter configuration with a quartz/halogen 55 watt H3 bulb. Available in a high-gloss black, polished chrome or Stainless Steel with hard plastic cover. Wiring Harness sold separately.
Lights sold individually.
Details:- Finish: Black
- Quartz halogen 55 watt H3 bulb
- Super slim 5 Inch diameter configuration
- A high performance, very compact light for hard-to-fit mounting locations
SKU: 9561-PRO -
Off Road Lights
55 Watt 5 Inch Spot Light Black Pro Comp Suspension
High-performance, very compact light for hard-to-fit Grille guards and light tabs, as well as other challenging locations. Super slim 5 diameter configuration with a quartz/halogen 55 watt H3 bulb. Available in a high-gloss black, polished chrome or Stainless Steel with hard plastic cover. Wiring Harness sold separately.
Lights sold individually.
Details:- Finish: Black
- Quartz halogen 55 watt H3 bulb
- Super slim 5 Inch diameter configuration
- A high performance, very compact light for hard-to-fit mounting locations
SKU: 9551-PRO -
Off Road Lights
6 Inch Round Light Pro Comp Suspension
This is the ideal spot light for serious off-roaders. The 100 watt light features special shock absorbing rubber gaskets around the lens, plus double rubber anti-vibration mounts. The wiring is protected by flexible metal conduit. Available in high gloss black or polished chrome finish. Wiring Harness sold separately.
Lights sold individually.
Details:- Finish: Black
- 100 watt light features special shock absorbing rubber gaskets around the lens
- Double rub anti-vibration mounts
- Wiring is protected by flexible metal conduit
SKU: 9004-PRO -
Fog Lights
6×9 Rectangular Driving Light Pro Comp Suspension
This light is big, bold and bright. It combines the power of a high-performance driving light with the versatility of a driving/flood light. 100 watts of light in a 6×9 rectangular configuration. Available in high-gloss black or polished chrome finish. Wiring Harness sold separately.Lights sold individually.
Details:- Black
- High-performance driving light with the versatility of a driving/flood light
- 100 watts of light in a 6 Inchx9 Inch rectangular configuration
SKU: 9002-PRO -
Off Road Lights
7 Inch 100 Watt Driving Light Pro Comp Suspension
7 driving beam increases high beam output by 40 percent for safer night driving. Features include Slim profile with all glass lens, highly polished reflectors, 100 watt quartz halogen H3 bulbs with amperage draw of 7.08 amps, specially fluted lens delivers long-range brightness plus even distribution for close in lighting requirements, high impact ABS housing.
Wiring harness sold separately. Sold individually.
Details:- HID Flood
- 35 Watt
- 4 inch diameter by 5.75 inch deep
- Black
- Clear and Amber Stone Guards
- Internal Ballast
- Wiring Harness
- Off-Road Use Only
SKU: 9851-PRO -
Off Road Lights
7 Inch HID Floodlight w/Stone Guard Pro Comp Suspension
HID Off Road Lighting from Explorer Pro Comp will light your way with confidence and clarity. We took super bright High Intensity Discharge bulbs and packaged them in a rugged, high strength package to provide an efficient and powerful beam that can withstand the rigors of off road abuse. Explorer HID are fully self-contained, and include internal ballast, waterproof connections, and a multi-directional mounting base. Each light contains pre-terminated wiring harness, relay, impact resistant stone guards and illuminated dash switch. More light means better visibility and faster reaction times. Don’t be left in the dark!
Details:- HID Flood
- 35 Watt
- 7 inch
- Black
- Clear and Amber Stone Guards
- Internal Ballast
- Wiring Harness
- Off-Road Use Only
SKU: 9670-PRO