JEEP BUMPERS
Showing 161–177 of 177 results
-
Tire Carriers
XRC Gen2 Bolt on Tire Carrier 07-18 Wrangler JK Smittybilt – 76857
Add a tire carrier to your new Smittybilt Gen2 XRC/SRC Bumper to get bigger spare tires on your Jeep. This new tire carrier design bolts directly to the new XRC/SRC Gen2 Bumpers, and includes Roto Pax and CB antenna mounts.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two-stage textured matte black finish
- Manufactured from 3/16-inch cold rolled steel
- Bolt on design for XRC/SRC GEN2 bumpers
- Frame pivot point for added strength
- Tuned one handed opening operation, tuned to factory tailgate
- CB and Jack mount and Roto Pax gas can holder
- 5 year limited warranty
- will also fit the stock 10th anniversary bumper
SKU: n/a -
Front Bumpers
XRC Gen2 Front Bumper 07-18 Wrangler JK Smittybilt – 76807
The XRC Gen 2 Max Front Stubby Bumper has a high degree approach angle and raised corners to maximize ground clearance. The bumper is manufactured from 3/16 cold rolled steel and then robotically welded to the exact specifications. The solid D-ring mounts are welded on the inside and outside (D-rings sold separately). Welds are ground down and smoothed out, then a two stage textured matte black powder coat is applied for the ultimate look. The front stinger is 1.75 tubing and has light tabs that can hold up to two 9 Inch lights (lights sold separately). The bumper is winch ready and can carry winches up to a 10,000 lb. rating. The Gen 2 Front Bumper comes with fog light cutouts.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- Two-stage textured matte black finish
- New Gen2 solid d-ring and jack point mount – welded on the inside and out
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- 1.75 Inch 120 Wall over rider and kickers
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- O.E. fog light provision
- Manufactured from 3/16 Inch cold rolled steel
- Tow-able D-ring mounts
- Powder coat finish with 5-year limited warranty
- Smittybilt Advantage lifetime warranty
SKU: n/a -
Rear Bumpers
XRC Gen2 Rear Bumper 07-18 Wrangler JK Smittybilt – 76858
With an updated look that is sure to be a hit with Jeep owners, the next generation XRC rear bumper was designed to meet the needs of off-road enthusiasts. The new bumper features raised corners that allow greater approach and departure angles ÜÄö perfect for vehicles running over sized tires. The redesigned solid D-ring mounts feature an integrated recovery point. The modular nature of the bumper allows you to add a tire carrier to the bumper (sold separately) S/B76857
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two-stage textured matte black finish
- New Solid D-Ring and Jack point Mount – Welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Aux back up light cut out provided
- Manufactured from 3/16-inch cold rolled steel
- Towable D-Ring mounts
- Powder Coat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Modular design, Tire Carrier can be added in the future.
- Class III hitch for True towing
- Anti-rattle provision provided for Receiver hitch
- lights included
SKU: n/a -
Front Bumpers
XRC M.O.D. Center Section 07-18 Wrangler JK Black Textured Smittybilt – 76825
The all new JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The base unit was developed around our XRC platform and comes standard with a winch cradle with capacity to support up to a 15,000lb. winch. Its also equipped with D-Ring mounts that are welded on the inside and out that provides a towable anchor when pulling your rig behind a truck or motor home. Choose between our Mid or Full Width End Plate knowing that bumper clearance won Foott be sacrificed when wheeling in the harshest conditions. Then decide which over rider you prefer, you can choose between our low profile bull bar or our high point stinger.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black powder coat finish
- Built-in winch plate to accommodate up to a 15k winch
- Manufactured from 3/16 cold rolled steel
- Solid mount d-rings Weld on the inside and out
SKU: n/a -
Bumper End Cap
XRC M.O.D. Full Width End Plate 07-18 Wrangler JK Smittybilt – 76818
The all new JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The base unit was developed around our XRC platform and comes standard with a winch cradle with capacity to support up to a 15,000lb. winch. Its also equipped with D-Ring mounts that are welded on the inside and out that provides a towable anchor when pulling your rig behind a truck or motor home.
Choose between our Mid or Full Width End Plate knowing that bumper clearance won Foott be sacrificed when wheeling in the harshest conditions. Then decide which over rider you prefer, you can choose between our low profile bull bar or our high point stinger.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black finish
- powder coat finish
- Marine grade stainless steel hardware
SKU: n/a -
Brush Guard
XRC M.O.D. Option Brush Guard 07-18 Wrangler JK Smittybilt – 76821
The JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The low profile bull bar protects your winch from trail obstacles and looks great on the front of your Jeep. When you purchase this part you will only receive the Bull Bar, this does not include the Modular Center Section bumper. To purchase the Bumper Center Section, look at part S/B76825.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black finish
- Manufactured from 3/16 Inch cold rolled steel
- Marine grade stainless steel hardware
- Brush guard only
- This is not the complete bumper
SKU: n/a -
Front Bumpers
XRC M.O.D. Option Bull Bar 07-18 Wrangler JK Black Textured Smittybilt – 76829
The JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The low profile bull bar protects your winch from trail obstacles and looks great on the front of your Jeep. When you purchase this part you will only receive the Bull Bar, this does not include the Modular Center Section bumper. To purchase the Bumper Center Section, look at part S/B76825.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black finish
- Marine grade stainless steel hardware
- Manufactured from 3/16 Inch cold rolled steel
- Bull Bar only
- This is not the complete bumper
SKU: n/a -
Bumper End Cap
XRC M.O.D. Option Crawler Bumper End Plate 07-18 Wrangler JK Black Textured Smittybilt – 76830
Bumper End CapXRC M.O.D. Option Crawler Bumper End Plate 07-18 Wrangler JK Black Textured Smittybilt – 76830
The new M.O.D. bumper system allow you to build your bumper in any configuration for any situation!
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Manufactured from 3/16 Inch cold rolled steel
- Marine grade stainless steel hardware
- Textured matte black finish
- For use with part number S/B76825
- Accepts OE fog lights
- Sold as a pair
SKU: n/a -
Bumper End Cap
XRC M.O.D. Option Full Width End Plates Smittybilt Black Textured – 76828
The JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The Full Width End Plate ensures that bumper clearance won Foott be sacrificed when wheeling in the harshest conditions. When you purchase this part you will only receive the Full Width End Plates, this does not include the Modular Center Section bumper. To purchase the Bumper Center Section, look at part S/B76825.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black finish
- Marine grade stainless steel hardware
- Fog lights included
- End plates only
- This is not the complete bumper
SKU: n/a -
Bumper End Cap
XRC M.O.D. Option Mid Width End Plates 07-18 Wrangler JK Black Textured Smittybilt – 76826
Bumper End CapXRC M.O.D. Option Mid Width End Plates 07-18 Wrangler JK Black Textured Smittybilt – 76826
The JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The Mid Width End Plate ensures that bumper clearance won Foott be sacrificed when wheeling in the harshest conditions. When you purchase this part you will only receive the Mid Width End Plates, this does not include the Modular Center Section bumper. To purchase the Bumper Center Section, look at part S/B76825.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black finish
- End plates only
- This is not the complete bumper
SKU: n/a -
Front Bumpers
XRC M.O.D. Option Stinger 07-18 Wrangler JK Black Textured Smittybilt – 76827
The JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The Mid Width End Plate ensures that bumper clearance won Foott be sacrificed when wheeling in the harshest conditions. When you purchase this part you will only receive the Mid Width End Plates, this does not include the Modular Center Section bumper. To purchase the Bumper Center Section, look at part S/B76825.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black powder coat finish
- Marine grade stainless steel hardware
- Stinger only
- This is not the complete bumper
SKU: n/a -
Rear Bumpers
XRC Rear Bumper w/ 2 Inch Hitch Receiver 07-18 Wrangler JK Black Powdercoat Smittybilt – 76855
Rear BumpersXRC Rear Bumper w/ 2 Inch Hitch Receiver 07-18 Wrangler JK Black Powdercoat Smittybilt – 76855
Smittybilt XRC Rear Bumpers implement the same technology and advanced engineering as XRC front bumpers, but also add a tow hitch mount and optional spare tire carrier. For rugged, heavy duty equipment designed to prepare you for off-road terrain, Smittybilt XRC Rear Bumpers are the answer you’re looking for.
- XRC Rear Bumper w/ Hitch
- Manufactured from 3/16 inch cold roll steel
- Solid Mount D-Rings – Welds on the inside and out!
- One-Piece welded design
- Class III 2 inch receiver hitch for true towing with towable D-ring mounts
- Matte Black Powdercoat Finish
- 5-Year Limited Warranty on Powdercoat
- Lifetime Limited Warranty on Structure
- Sold As Each
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
SKU: n/a -
Rear Bumpers
XRC Rear Bumper w/ 2 Inch Hitch Receiver and Tire Carrier 07-18 Wrangler JK Black Powdercoat Smittybilt – 76856
Rear BumpersXRC Rear Bumper w/ 2 Inch Hitch Receiver and Tire Carrier 07-18 Wrangler JK Black Powdercoat Smittybilt – 76856
Smittybilt XRC Rear Bumpers implement the same technology and advanced engineering as XRC front bumpers, but also add a tow hitch mount and optional spare tire carrier. For rugged, heavy duty equipment designed to prepare you for off-road terrain, Smittybilt XRC Rear Bumpers are the answer you’re looking for.
- XRC Rear Bumper w/ Hitch and Tire Carrier
- Manufactured from 3/16 inch cold roll steel
- Solid Mount D-Rings – Welds on the inside and out!
- One-Piece welded design
- Class III 2 inch receiver hitch for true towing with towable D-ring mounts
- Adjustable Tire Mount that accommodates up to a 37 inch tire
- Swing Away includes third brake light bracket
- Solid billet aluminum handle with built-in cam lock
- Matte Black Powdercoat Finish
- 5-Year Limited Warranty on Powdercoat
- Lifetime Limited Warranty on Structure
- Sold As Each
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
SKU: n/a -
Rear Bumpers
XRC Rear Jeep Bumper w/ 2 Inch Hitch Receiver 07-18 Wrangler JK Black Smittybilt – 76856-01
Rear BumpersXRC Rear Jeep Bumper w/ 2 Inch Hitch Receiver 07-18 Wrangler JK Black Smittybilt – 76856-01
Smittybilt XRC Rear Bumpers implement the same technology and advanced engineering as XRC front bumpers, but also add a tow hitch mount and optional spare tire carrier. For rugged, heavy duty equipment designed to prepare you for off-road terrain, Smittybilt XRC Rear Bumpers are the answer you’re looking for.
- XRC Rear Bumper JK w/ Hitch
- Manufactured from 3/16 inch cold roll steel
- 1.75 inch .120 wall over rider and kickers
- Raised corners for better entry and exit under the most extreme conditions
- Solid Mount D-Rings – Welds on the inside and out!
- One-Piece welded design
- Class III hitch for true towing with towable D-ring mounts
- Textured Black Powdercoat Finish
- 5-Year Limited Warranty on Powdercoat
- Lifetime Limited Warranty on Structure
- Sold As Each
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
SKU: n/a -
Rear Bumpers
XRC Swingaway Rear Bumper 84-01 Cherokee XJ Black Smittybilt – 76851-01
The Bowless/Combo Top from Smittybilt is the most adaptable Jeep top. When hitting the trail hard on a sunny day and clouds roll in you can quickly convert your Smittybilt Bowless/Combo Top from an extended top to a weather protected full top. Convenience is factored in due to internal storage of the removable side curtains. This top requires the use of the factory door surrounds and tailgate bar, as well as a header windshield channel (sold separately.)
Details:- Fits 1997 to 2006 TJ Wrangler and Rubicon
- Black diamond
- Will not work with factory windshield channel
- Functions as primary top
- Remove sides to convert to extended top
- No factory bow hardware required
- Marine grade durable vinyl coated soft top
- OEM diamond-style fabrics
- 30ml DOT tinted glass
- Resists fading and stretching
- Heat-sealed seams to prevent leaking and wick stop threads seal stitch holes
- Internal storage compartments and MOLLE attachments
- Self-correcting zippers run smoother and last longer
- Side windows and rear window completely zip out
- Requires windshield header, factory door surrounds and tailgate bar
- Upper door skins not included
SKU: n/a -
Tire Carriers
XRC Tailgate and Tire Carrier Jeep JK/JKU Wrangler 07-18 2 Door/4 Door Up To 37 Inch Tire Black Powdercoat Smittybilt – 76410
Tire CarriersXRC Tailgate and Tire Carrier Jeep JK/JKU Wrangler 07-18 2 Door/4 Door Up To 37 Inch Tire Black Powdercoat Smittybilt – 76410
The new Smittybilt XRC Tailgate with tire carrier uses an OE bolt configuration, cast steel hinge points and a hardened steel pin to eliminate tailgate sag forever! Manufactured from 14-gauge steel with a durable light texture finish, this product bolts on with no drilling or cutting required. The XRC Tailgate features integrated tie down points, roof access steps, a bottle opener and can be installed with Smittybilt or factory bumpers. Designed and engineered in California.
- XRC Tailgate w/ Tire Carrier
- Heavy-duty construction to support up to a 37 inch tire
- Pre-drilled holes for factory handles and latch transfer
- Rigged cast steel hinge points and 1 inch hardened pin eliminate tailgate sag
- Step and built-in bottle opener
- Includes third brake light
- Direct bolt-on installation
- Can be used with XRC Tire Carrier or Slant Tire Carrier Adapter (76857 and 76857-05)
- Textured Matte Black Powdercoat Finish
- 5-Year Limited Warranty on Powdercoat
- Lifetime Limited Warranty on Structure
- Sold As Each
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
SKU: n/a -
Tire Carriers
XRC Tire Carrier For Jeep JK Fits XRC Rear Bumper 07-18 Jeep JK Wrangler Black Powdercoat Smittybilt – 76856-02
Tire CarriersXRC Tire Carrier For Jeep JK Fits XRC Rear Bumper 07-18 Jeep JK Wrangler Black Powdercoat Smittybilt – 76856-02
Smittybilt XRC Rear Bumpers implement the same technology and advanced engineering as XRC front bumpers, but also add a tow hitch mount and optional spare tire carrier. For rugged, heavy duty equipment designed to prepare you for off-road terrain, Smittybilt XRC Rear Bumpers are the answer you’re looking for.
- XRC Tire Carrier
- For XRC Rear Bumper JK w/ Hitch (P/N 76856-01)
- Swing Away Design
- Manufactured from cold roll steel
- One-Piece welded design
- Includes billet aluminum release handle assembly
- Textured Black Powdercoat Finish
- 5-Year Limited Warranty on Powdercoat
- Lifetime Limited Warranty on Structure
- Sold As Each
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
SKU: n/a