Weight | 48 lbs |
---|
DV8 Offroad RBJL-03 Jeep JL Rear Bumper with LED Lights
RBJL-03 2018+ Jeep JL High Clearance Rear Bumper
The DV8 Offroad RBJL-03 was designed to be tucked up and out of the way for traversing difficult trails and coming off of rock ledges. The bumper comes with 2 integrated LED backup lights for improved visibility at night and features 2 recovery shackle attachments. The bumper comes with the standard DV8 Offroad textured black powdercoat.
Features:
-High clearance design
-Aggressive angles and styling
-Incorporates 2 LED Backup Lights
-Easy to install
-Accommodates backup sensors
$421.49 $467.99
Related products
-
Rear Bumpers
JK Brawler FULL Width Rear Bumper Lights Tabs Poison Spyder – 17-62-040-DL
0 out of 5(0)The Brawler Full Width Rear Bumper Lights Tabs for Jeep Wrangler JK 2007-2016 provides the highest ground and tire clearance possible in a Full width JK rear bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their Stock JK fender flares. The bumper extends to the Full width of the Stock flares, to integrate with them cleanly while protecting them from trail hazards.
This configuration includes high clearance recovery shackle tabs and a receiver hitch. Like all bumpers in the Brawler product line, the Full Width rear bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel. It will need to be painted or powdercoated prior to final installation.
Features:- Full-width, multi-faceted design protects lower grille and extends to outer edge of Stock flares
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- Recessed mounts for LED pod lights
- Integrated high clearance hitch receiver
Full Width
Finally there is a Full Width front bumper that incorporates Poison Spyder attention to form and function, in an elegant package that integrates perfectly with the Stock Jeep or aftermarket Stock replacement fender flares. While this bumper was designed for those Jeep enthusiasts who prefer a more overland style and function to their Jeep build, or want to keep their factory flares, we could Not simply make a Full-width monstrosity like so many unsightly bumpers already on the market.Even though it is Full width, and less likely to be used on the hard core rock trails, we still felt compelled to design it with maximum approach angle, ground clearance and tire clearance possible while still extending out to the Full width of the Stock flares to protect the corners of the Jeep.
The outriggers that extend to the edge of the flare are kept as tight to the original Brawler high clearance lines as possible, tapering outward toward the ends. This allows the best departure angles possible in a Full width rear bumper, minimizing the chances of hanging up as the rear tire comes off a rock or ledge. The outriggers are designed to integrate visually with the Stock fender flares, in a clean, almost factory look.
Bumper Plate Steel Construction
Every Brawler bumper starts out as a sheet of 3/16 inch plate steel. Our CNC laser cutter precisely cuts the flat pattern as designed in our 3D CAD system. Next the bumper parts are CNC brake-formed into the high clearance, multi-faceted pieces that will become a finished bumper. Highly skilled tradesmen weld each bumper together using precision-engineered assembly fixtures for a perfect fit. Finally the complete bumper is sent through our finishing department for final appearance surfacing and quality control checks.
Integrated Hitch Receiver
The integrated hitch receiver accepts Standard 2 inch hitches and recovery accessories. It is built in to the structure of the Brawler Full Width Rear Bumper in order to provide a higher clearance, tougher hitch that is there when you need it, but tucked up higher out of the way for better clearance and departure angles on the trail. Includes integrated safety chain loops.Important: The integrated hitch receiver is Not rated for towing. It is intended as a recovery attachment point only.
Rock Solid Mounting
The JK Brawler Full Width Rear Bumper incorporates an extra set of mounting bolts, along the bottom of the bumper which fasten into the rear crossmember. Combined with the mounting flange bolts at either side, the bumper is rigidly fastened by a total of 8 Grade 8 bolts, on three different planes to provide ultimate strength and rigidity to the mounted bumper. The drivers side floating flange allows for safe, secure tightening to the Jeep frame rails regardless of manufacturing variances from the Jeep factory.
Recovery Shackle Tabs
The Heavy Duty Recovery Shackle Tabs are CNC machined from 1 inch thick steel billet, specifically designed to accept our Heavy Duty 3/4 inch Recovery Shackles. These tabs are designed to match the high clearance aspects of the rest of the bumper and minimized hang-ups. These Heavy Duty Recovery Shackle Tabs come as Standard equipment on the Brawler Full Width Rear Bumper.SKU: 17-62-040-DL-PSC$638.99 -
Rear Bumpers
JK Brawler FULL Width Rear Bumper Tabs Poison Spyder – 17-62-040-D
0 out of 5(0)The Brawler Full Width Rear Bumper Tabs for Jeep Wrangler JK 2007-2016 provides the highest ground and tire clearance possible in a Full width JK rear bumper. This bumper brings Poison Spyder form and function to the overlander market, and to those who would like to keep their Stock JK fender flares. The bumper extends to the Full width of the Stock flares, to integrate with them cleanly while protecting them from trail hazards.
This configuration includes high clearance recovery shackle tabs and a receiver hitch. Like all bumpers in the Brawler product line, the Full Width rear bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. This product ships as bare steel. It will need to be painted or powdercoated prior to final installation.
Features:- Full-width, multi-faceted design protects lower grille and extends to outer edge of Stock flares
- CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
- High clearance recovery shackle tabs CNC machined from 1 steel
- Integrated high clearance hitch receiver
Full Width
Finally there is a Full Width front bumper that incorporates Poison Spyder attention to form and function, in an elegant package that integrates perfectly with the Stock Jeep or aftermarket Stock replacement fender flares. While this bumper was designed for those Jeep enthusiasts who prefer a more overland style and function to their Jeep build, or want to keep their factory flares, we couldn’t simply make a Full-width monstrosity like so many unsightly bumpers already on the market.Even though its Full width, and less likely to be used on the hard core rock trails, we still felt compelled to design it with maximum approach angle, ground clearance and tire clearance possible while still extending out to the Full width of the Stock flares to protect the corners of the Jeep.
The outriggers that extend to the edge of the flare are kept as tight to the original Brawler high clearance lines as possible, tapering outward toward the ends. This allows the best departure angles possible in a Full width rear bumper, minimizing the chances of hanging up as the rear tire comes off a rock or ledge. The outriggers are designed to integrate visually with the Stock fender flares, in a clean, almost factory look.
Bumper Plate Steel Construction
Every Brawler bumper starts out as a sheet of 3/16 inch plate steel. Our CNC laser cutter precisely cuts the flat pattern as designed in our 3D CAD system. Next the bumper parts are CNC brake-formed into the high clearance, multi-faceted pieces that will become a finished bumper. Highly skilled tradesmen weld each bumper together using precision-engineered assembly fixtures for a perfect fit. Finally the complete bumper is sent through our finishing department for final appearance surfacing and quality control checks.
Integrated Hitch Receiver
The integrated hitch receiver accepts Standard 2 inch hitches and recovery accessories. It is built in to the structure of the Brawler Full Width Rear Bumper in order to provide a higher clearance, tougher hitch that is there when you need it, but tucked up higher out of the way for better clearance and departure angles on the trail. Includes integrated safety chain loops.Important: The integrated hitch receiver is Not rated for towing. It is intended as a recovery attachment point only.
Rock Solid Mounting
The JK Brawler Full Width Rear Bumper incorporates an extra set of mounting bolts, along the bottom of the bumper which fasten into the rear crossmember. Combined with the mounting flange bolts at either side, the bumper is rigidly fastened by a total of 8 Grade 8 bolts, on three different planes to provide ultimate strength and rigidity to the mounted bumper. The drivers side floating flange allows for safe, secure tightening to the Jeep frame rails regardless of manufacturing variances from the Jeep factory.
Recovery Shackle Tabs
The Heavy Duty Recovery Shackle Tabs are CNC machined from 1 inch thick steel billet, specifically designed to accept our Heavy Duty 3/4 inch Recovery Shackles. These tabs are designed to match the high clearance aspects of the rest of the bumper and minimized hang-ups. These Heavy Duty Recovery Shackle Tabs come as Standard equipment on the Brawler Full Width Rear Bumper.SKU: 17-62-040-D-PSC$618.99 -
Rear Bumpers
JK Rear Bumper Kit 07-Pres Wrangler JK TeraFlex
0 out of 5(0)%3Cp%3EThe+TeraFlex+JK+Outback+rear+bumper+for+the+JK+Wrangler+is+designed+to+offer+ultimate+rock+protection%2C+and+continue+to+match+the+design+styling+of+the+vehicle%E2%80%99s+body+but+still+offer+the+protection+needed+to+allow+the+4500%2B+lb.+vehicle+to+push+over+rocks+and+obstacles.+The+rear+bumper+features+a+recessed+spare+tire+well+and+can+be+paired+with+the+TeraFlex+HD+hinged+tire+carrier+and+mount+to+allow+easy+access+to+the+rear+of+the+Jeep%2C+sold+separately.+Comes+in+textured+black+powder+coat+finish.%3Cbr+%2F%3E%3Cstrong%3EFits%3A%3C%2Fstrong%3E%3C%2Fp%3E%0A%3Cul%3E%0A%3Cli%3E07-Present+Jeep+Wrangler+JK%3C%2Fli%3E%0A%3Cli%3E07-Present+Jeep+Wrangler+Unlimited+JK%3C%2Fli%3E%0A%3C%2Ful%3E%0A%3Cp%3E%3Cstrong%3EDetails%3A%3C%2Fstrong%3E%3C%2Fp%3E%0A%3Cul%3E%0A%3Cli%3EJK+Rear+Outback+Bumper+Kit%3C%2Fli%3E%0A%3Cli%3EHeavy+Enough+To+Push+Over+Rocks+And+Obstacles%3C%2Fli%3E%0A%3Cli%3ECan+Be+Paired+With+The+TeraFlex+HD+Hinged+Tire+Cover%3C%2Fli%3E%0A%3Cli%3ETextured+Black+Powdercoat+Finish%3C%2Fli%3E%0A%3C%2Ful%3E%0A
SKU: 4654100-FNNT$897.74$944.99 -
Rear Bumpers
Tubular Bumper Rear 07-18 Wrangler JK W/O Hitch Gloss Black Smittybilt – JB48-R
0 out of 5(0)Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Gloss Black
- One-piece design
- Robotically welded for extreme durability
- Pre-cut vertical uprights for a signature look
- No hitch
- 5 year limited warranty
SKU: n/a$179.99 -
Rear Bumpers
RockBrawler Hi-Lift Jack Mount Poison Spyder – 45-61-010
0 out of 5(0)RockBrawler Hi-Lift Jack Mount for Jeep Wrangler JK 2007-2016. This accessory makes it easy to mount a Hi-Lift jack to your Poison Spyder RockBrawler Rear Bumper with Tire Carrier. The mount plate is CNC laser cut from 3/16 inch plate steel, with an unmistakable Spyder web design. The plate bolts to the top of the tire carrier using the supplied Grade 8 hardware.
Your Hi-Lift jack attaches to the mount plate with a pair of heavy duty 1/2 inch carriage bolts with urethane isolator bushings. We provide both wing nuts and nylock nuts so you can choose which to use to fasten your Jack to the mount. The RockBrawler Hi-Lift Jack Mount comes bare steel so you may paint or powdercoat in the color of your choice.
Important: This product is designed for use with the RockBrawler Rear Bumper with Tire Carrier. If you have a RockBrawler II Rear Bumper with Tire Carrier, you need our Rock Brawler II Hi-Lift Jack Mount instead.
Features:- CNC laser cut 3/16 plate steel
- Provides easy, convenient mounting of a Hi-Lift jack on to a RockBrawler Rear Bumper Tire Carrier
- Hardware and install instructions included. Bare steel (requires paint or powdercoat)
- Designed specifically for RockBrawler Tire Carriers
SKU: 45-61-010-PSC$75.98