SKU: RBSTTB-14
Category: Rear Bumpers
Tags: Bumpers, Bumpers & Armor, Exterior Parts & Car Care, Rear Bumpers
Brand: DV8 Offroad
-20%
Rear Bumpers
DV8 Offroad RBSTTB-14-HKJT Rear Bumper 07-18 Wrangler JK w/Lights
DV8 Offroad bumpers are all trail tested and proven designs! 3/16 inch and 1/4 inch cold rolled steel, .120 wall tubing, high degree angles and raised corners. All bumpers come in textured black powdercoating. For 2007 – 2018 Jeep Wrangler all models. Easy installation, no modifications needed and hardware included.
Features:
- Full Length Rear Bumper
- DV8 laser cut logo in center of the bumper
- .120 Wall Tubing
- 3/16 inch and 1/4 inch Cold Rolled Steel
- Textured Black Powdercoat
- Hardware Included
- Fits 2007-2018 Jeep JK Wrangler
- Sold as Each
Note:
- Small holes can be used for either a jacking point or to mount an LED light
- Can accommodate up to a 35 inch tire with the stock tire carrier
$390.33 $487.91
Related products
-
Rear Bumpers
RockBrawler Hi-Lift Jack Mount Poison Spyder – 45-61-010
0 out of 5(0)RockBrawler Hi-Lift Jack Mount for Jeep Wrangler JK 2007-2016. This accessory makes it easy to mount a Hi-Lift jack to your Poison Spyder RockBrawler Rear Bumper with Tire Carrier. The mount plate is CNC laser cut from 3/16 inch plate steel, with an unmistakable Spyder web design. The plate bolts to the top of the tire carrier using the supplied Grade 8 hardware.
Your Hi-Lift jack attaches to the mount plate with a pair of heavy duty 1/2 inch carriage bolts with urethane isolator bushings. We provide both wing nuts and nylock nuts so you can choose which to use to fasten your Jack to the mount. The RockBrawler Hi-Lift Jack Mount comes bare steel so you may paint or powdercoat in the color of your choice.
Important: This product is designed for use with the RockBrawler Rear Bumper with Tire Carrier. If you have a RockBrawler II Rear Bumper with Tire Carrier, you need our Rock Brawler II Hi-Lift Jack Mount instead.
Features:- CNC laser cut 3/16 plate steel
- Provides easy, convenient mounting of a Hi-Lift jack on to a RockBrawler Rear Bumper Tire Carrier
- Hardware and install instructions included. Bare steel (requires paint or powdercoat)
- Designed specifically for RockBrawler Tire Carriers
SKU: 45-61-010-PSC$75.98 -
Rear Bumpers
JK BFH II Rear Bumper Receiver Tabs Poison Spyder – 17-17-040-D
0 out of 5(0)JK BFH II Rear Bumper Receiver Tabs for Jeep Wrangler JK 2007-2016. Poison Spyder BFH II Rear Bumpers are designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally Built For the Hammers with the best ground clearance and departure angle possible. It is no wider than the Jeep JK Wrangler rear body tub, with angled facets to improve its ability to slide over the rocks while still protecting the corner of the tub from drop-offs and ledges.
This version of the BFH II features CNC machined high clearance recovery shackle tabs. For the ultimate in strength and durability, pair it with the JK BFH II Rear Crossmember.
Features:
Low profile faceted design for high clearance of trail obstacles
CNC laser cut from 3/16 plate steel, precision brake-formed for a perfect fit
High clearance recovery shackle tabs CNC machined from 1 thick plate steel
Slot for hitch receiver (requires p/n 17-17-030)
Installation requires cutting/trimming of Jeep frame rails and rear crossmemberPlate Steel Construction
The BFH II Rear Bumper is CNC laser-cut from high strength 3/16 inch plate steel, then precision brake-formed for an exact fit. In keeping with its minimalist design parameter, the BFH II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire used.
High Clearance and Departure Angle
The faceted plate steel design of the JK BFH II Rear Bumper provides the Most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and Stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the Stock rear crossmember. At the installers discretion, the Stock rear crossmember may be plated across the open cut (materials to do this are Not included), or the crossmember removed completely.
Optional Replacement Crossmember
If the Stock crossmember is removed completely, it may be replaced with the JK BFH II Rear Crossmember (Note that there are versions of the BFH II Crossmember with or without a receiver hitch-this particular version of the BFH II Rear Bumper is specificaly designed to work with the non-receiver version-it will Not work with the crossmember that has the integrated hitch receiver (p/n 17-17-030).
High Clearance Shackle Tabs
The JK BFH II Rear Bumper includes heavy duty, high clearance Recovery Shackle Tabs. These tabs were CAD designed specifically for use with this bumper, with a high-clearance design to minimize loss of departure angle and to handle sliding off of rocks rather than hanging up on them. The tabs are CNC machined from 1 inch thick plate steel to provide a secure attachment point for 3/4 inch recovery shackles (sold separately).Notes: Installation requires cutting of Stock frame rails! Please read through the Installation Instructions so that you are Fully aware of the modifications required to your Jeep frame rails, before purchasing. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
SKU: 17-17-040-D-PSC$449.99 -
Rear Bumpers
XRC Atlas Rear Bumper with Tire Carrier 07-18 Wrangler JK Smittybilt – 76896
0 out of 5(0)The Smittybilt XRC Atlas rear bumper have gone through extensive design and testing to meet stringent international pedestrian safety standards. As a result, the bumpers is stylishly chiseled as well as being extremely strong and functional. The rear bumper utilizes a new cam-style pin adjustment for ensuring perfect gate stowing every time. Re-opening the gate is simple too, only requiring minimal effort, however you can rest easy as the double latch will eliminate accidental opening. The bumper allows im2018sive ground clearance and can accommodate up to 37 Inch tires. Enjoy the MOLLE Pals compatibility to allow multiple pouch mounting configurations. The bumper includes a Class III rated hitch, mounting locations for your jerry can and lift jack (Jack and Hi-lift are not included) and a 3rd brake light mounting bracket.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black finish
- Class III tow rated
- Includes 3rd brake light bracket
- Integrated gas can and jack mounts
- Accommodates a 37 Inch tire
- Manufactured from 3/16 cold rolled steel
- 5 year limited warranty
SKU: n/a$999.99 -
Rear Bumpers
JK BFH II Rear Crossmember Receiver Poison Spyder – 17-17-030
0 out of 5(0)JK BFH II Rear Crossmember Receiver for Jeep Wrangler JK 2007-2016. By itself or used in conjunction with the JK BFH II Rear Bumper, this Built For the Hammers crossmember strengthens the Jeep JK Wrangler rear frame when trimmed for maximum ground clearance and departure angle. Includes a built-in hitch receiver (Not rated for towing).
Features:- Heavy Duty replacement for Stock crossmember
- Works with BFH II Rear Bumpers
- May by used by itself for minimalist bumper
- CNC laser cut brake-formed 3/16 steel plate
Plate Steel Construction
The BFH II Rear Crossmember is CNC laser-cut from high strength 3/16 inch plate steel, then precision brake-formed for an exact fit. Dimpled lighting holes remove unnecessary weight while creating a custom look for those who choose to run the crossmember by itself without a rear bumper to cover it.
High Clearance and Departure Angle
The minimalist design of the JK BFH II Rear Bumper provides the Most ground/obstacle clearance and best departure angle possible while preserving the integrity of the Jeep JK frame strength. Installation requires trimming the bulky rear frame rails and Stock bumper mounts and welding in the new crossmember. A laser-cut steel template is provided to assist with making the right cuts.
Use By Itself or With BFH II Rear Bumper
The BFH II Rear Crossmember may be used by itself as an ultra-minimalist, high clearance rear bumper. But it is designed to be used with the Poison Spyder BFH II Rear Bumper.The bumper fits over the crossmember like a glove. Together, this combination provides the frame-strengthening characteristics of the crossmember along with the aesthetics of the BFH II Rear Bumper. This specific part number for the crossmember includes the integrated hitch receiver, so it can only be used with the K BFH II Rear Bumper – Receiver – Tabs or K BFH II Rear Bumper – Receiver – Tabs – Lights. A different version of the BFH II Crossmember is available without the hitch receiver (p/n 17-17-010)
Integrated Hitch Receiver
This version of the JK BFH II Rear Crossmember is designed with an integrated hitch receiver as a convenient recovery attachment or tow point. The hitch receiver is constructed of Standard 2 inch square hitch receiver material and will accept Most hitch bars. Safety chain loops are provided behind the crossmember, tucked up out of the way of rocks.Important: in order to preserve the lowest profile and maximum departure angle, the receiver tube is slightly shorter than Standard tow hitches. This may necessitate trimming of the end of some receiver bars. This also places the hitch pin into a non-Standard location for tow-rating. Because of this the hitch is Not technically rated for towing, even though its design is stronger than the factory tow hitch.
Notes: Installation requires cutting of Stock frame rails and welding! Please read through the Installation Instructions so that you are Fully aware of the modifications required to your Jeep frame rails, before purchasing.
This product ships as bare steel it will need to be painted after installation.
SKU: 17-17-030-PSC$299.99 -
Rear Bumpers
SRC Gen2 Rear Bumper 07-18 Wrangler JK Smittybilt – 76614
0 out of 5(0)Smittybilts all new SRC Gen 2 bumpers are engineered to provide the maximum protection without sacrificing the ability to go anywhere off road. Each SRC bumper features 3/16 Inch steel construction, solid plate center sections that wrap and protects the frame horns and lower cross members, providing the ultimate protection when off roading. Each rear bumper features a class III, 2 Inch receiver hitch that is incorporated into the bumper and bolts directly up to your factory mounting points. Includes two D-ring mounts for those sticky situations.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two-stage textured matte black finish
- New solid d-ring and jack point mount – Welded on the inside and out
- Fender to fender protection
- Aggressive design for with raised corners for better entry and exit angles
- Aux back up light cut out provided/lights included
- Manufactured from 3/16-inch cold rolled steel
- Towable d-ring mounts
- Two-Stage Textured Matte Black Finish
- Smittybilt Limited Lifetime Warranty
- Modular design – Tire Carrier can be added in the future (S/B76857).
- Class III hitch for true towing
- Anti-rattle provision provided for receiver hitch
SKU: n/a$599.99