Rock Sliders
Showing 33–45 of 45 results
-
Rock Sliders
JK 4-Dr Ricochet Rockers Frame Mounted Poison Spyder – 18-08-040
0 out of 5(0)JK 4-Dr Ricochet Rockers Frame Mounted for Jeep Wrangler JK 2007-2016. Poison Spyder JK Ricochet Rockers provide rocker protection for your Jeep vulnerable body sheet metal, while also providing a convenient step for easily entering and exiting the Jeep. These Ricochet Rockers are mounted to the Jeep frame to provide the best protection possible without relying on the Jeep comparatively weaker body tub for support.
Features:- Frame-mounted for ultimate strength and Dimpled step plate for easy entry
- Protects your Jeep rocker panels from damage on the trail
- 1.75 OD X .120 wall DOM main tube with 1.5 X .120 wall DOM slider tube
- CNC laser cut, triangulated outriggers
DOM Tube and Die-Dimpled Step Plates
The tubular rocker rail is rugged 1.75 inch X .120 wall DOM structural tubing. The slider rail is fabricated from CNC-bent 1.5 inch X .120 wall DOM tubing. Ricochet Rockers have a distinguishing 5 inch wide dimpled plate that acts as a step and a stout reinforcement for the slider. This makes the Ricochet Rocker protection a very effective armor addition and an effective pivot for getting your maneuvering your Jeep through tight spots on the trail. With the dimple protrusions pointing upward, they give the extra benefit of increased foot traction when entering or exiting the vehicle, even with boots covered with snow or mud. These step plates, as well as the corner gussets added at either end of the Ricochet Rocker, are CNC laser cut from 1/8 inch steel plate.
Frame-Mounted Outriggers
Frame-Mounted Ricochet Rockers attach to your Jeep frame rails through rugged, precision engineered outriggers on each side. The outriggers are fabricated of CNC laser cut 3/16 inch thick plate steel, and are designed in a triangular shape to act as their own gusset and provide superior strength. The outrigger wraps around the bottom and side of the frame rail for support on two planes. The outriggers are also located so they may be directly bolted to the sides of the Jeep body mounts for even more strength. Compare this design to competitors frame-mounted sliders that use a simple piece of non-triangulated, non-gusseted tubing welded to a plate that attaches to the side of the Jeep frame rail.
Bolt-On or Weld-On installation
Instructions and hardware are provided for a fairly easy bolt-on installation of the Frame-Mounted Ricochet Rockers. The procedure uses some existing mounting holes on your Jeep frame, but does require some additional drilling and tapping. Alternatively, installers may choose to weld the Ricochet Rockers in place.
Suspension and Body Lift Compatibility
Frame-Mounted JK Ricochet Rockers are Not compatible with typical long arm suspension kits, without some Do-It-Yourself modifications. The rearward support outrigger will likely interfere with the location of Most long-arm kits link brackets. For those wishing to install this product in conjunction with a long-arm kit, it may be possible to do so by ordering the Ricochet Rockers with the rearward outrigger Not welded on, and then locating and welding them in place during installation. To special-order the kit with the rearward outriggers un-welded, call our sales department at 951-849-5911. Also Note that, as a frame-mounted product, any body lift installed on the Jeep will result in a gap of the same height, between the Ricochet Rocker and the Jeep body tub.
Don’t Forget the JK Body Armor!
Poison Spyder JK Ricochet Knockers can be utilized as a stand alone component or can be used in conjunction with Poison Spyder JK Body Armor. JK Body Armor is a secondary line of defense against off road damage to your Jeep, protecting the Jeep by reaching above the slider level up to the door line. Ricochet Rockers do Not mount to or use the Body Armor for additional structure. But they work and look great together as a complete rocker armor package.SKU: 18-08-040-PSC$548.99 -
Rock Sliders
JK 4-Dr Rocker Knockers Body Mounted Poison Spyder – 18-08-020
0 out of 5(0)JK 4-Dr Rocker Knockers Body Mounted for Jeep Wrangler JK 2007-2016. The Most vulnerable areas on the body of the Jeep JK are the rocker panels. Poison Spyder Rocker Knockers protect your JKs rocker panel area while enabling you to slide over rocks and obstacles. Rocker Knockers enhance your Jeep trail performance while adding rugged off-road looks to your JK.
Features:- Protects your Jeep rocker panels from damage on the trail
- 1.75 OD X .120 wall DOM main tube with 1.5 X .120 wall DOM slider tube
- CNC laser cut, brake-formed 3/16 steel mounting plate
- Removable, replacable CNC laser cut and oval dimpled 1/8 steel slider skid
- Mounts to Jeep body tub to provide better ground clearance than frame-mounted sliders
Poison Spyder JK Rocker Knockers are engineered for brute strength and impact resistance by attaching to the Jeep body in 14 strategic bolt locations. The mounting plate is CNC laser cut from 3/16 inch plate steel and precision brake-formed for a perfect fit.
The tubular rocker rail is rugged 1.75 inch X .120 wall DOM structural tubing. The slider rail is fabricated from CNC-bent 1.5 inch X .120 wall DOM tubing. The space between the Slider and the main tube of the Rocker Knocker is filled with a CNC laser-cut Slider Skid. The Skid features Poison Spyder exclusive oval dimples for structural strength as well as great Poison Spyder looks. The Skid attaches with countersunk stainless steel flat head cap screws for a flush surface. The Slider and Skid mount at an angle to the main tube of the Rocker Knocker to provide boatside-like protection from the rocks while keeping the Jeep doors and body a safe distance from higher level trail hazards.
ANother quality element of the Poison Spyder Rocker Knocker is the ability to remove the outer slider skid. The outer skid is built from 1/8 inch steel and is secured to a 3/16 inch base plate welded into the slider hoop assembly. The Slider does Not rely on the skid for structure. The advantage of having the ability to remove the skid, is to allow you to replace it if it becomes damaged to a level that it has lost its aesthetic appearance or functionality. Also you will be able to customize the Sliders to match your Jeep, and to easily be able to remove it for re-finish.
Poison Spyder JK Rocker Knockers are compatible with all known suspensions and body lifts, including long arm kits. Because the Rocker Knockers mount directly to the Jeep body tub, they will lift with the body when a body lift is installed (competitor frame-mounted rocker guards may leave a gap on body-lifted vehicles). As an added attribute the Rocker Knocker mounting plate is designed with drain reliefs to discourage debris from collecting in the lower body cavity.
Poison Spyder JK Rocker Knockers can be utilized as a stand alone component or can be used in conjunction with Poison Spyder’s JK Body Armor. JK Body Armor is a secondary line of defense against off road damage to your Jeep, protecting the Jeep by reaching above the Slider level up to the door line. Rocker Knockers do Not mount or use the Body Armor for additional structure.
SKU: 18-08-020-PSC$628.99 -
Rock Sliders
JK 4-Dr Rocker Knockers Frame Mounted Poison Spyder – 18-08-030
0 out of 5(0)JK 4-Dr Rocker Knockers Body Mounted for Jeep Wrangler JK 2007-2016. The Most vulnerable areas on the body of the Jeep JK are the rocker panels. Poison Spyder Rocker Knockers protect your JKs rocker panel area while enabling you to slide over rocks and obstacles. Rocker Knockers enhance your Jeep trail performance while adding rugged off-road looks to your JK.
Features:
Frame-mounted for ultimate strength
Removable, replaceable CNC laser cut and oval dimpled 1/8 steel slider skid
Protects your Jeep rocker panels from damage on the trail
1.75 OD X .120 wall DOM main tube with 1.5 X .120 wall DOM slider tube
CNC laser cut, triangulated outriggersPoison Spyder JK Rocker Knockers are engineered for brute strength and impact resistance by attaching to the Jeep body in 14 strategic bolt locations. The mounting plate is CNC laser cut from 3/16 inch plate steel and precision brake-formed for a perfect fit.
The tubular rocker rail is rugged 1.75 inch X .120 wall DOM structural tubing. The slider rail is fabricated from CNC-bent 1.5 inch X .120 wall DOM tubing. The space between the Slider and the main tube of the Rocker Knocker is filled with a CNC laser-cut Slider Skid. The Skid features Poison Spyder exclusive oval dimples for structural strength as well as great Poison Spyder looks. The Skid attaches with countersunk stainless steel flat head cap screws for a flush surface. The Slider and Skid mount at an angle to the main tube of the Rocker Knocker to provide boatside-like protection from the rocks while keeping the Jeep doors and body a safe distance from higher level trail hazards.
ANother quality element of the Poison Spyder Rocker Knocker is the ability to remove the outer slider skid. The outer skid is built from 1/8 inch steel and is secured to a 3/16 inch base plate welded into the slider hoop assembly. The Slider does Not rely on the skid for structure. The advantage of having the ability to remove the skid, is to allow you to replace it if it becomes damaged to a level that it has lost its aesthetic appearance or functionality. Also you will be able to customize the Sliders to match your Jeep, and to easily be able to remove it for re-finish.
Poison Spyder JK Rocker Knockers are compatible with all known suspensions and body lifts, including long arm kits. Because the Rocker Knockers mount directly to the Jeep body tub, they will lift with the body when a body lift is installed (competitors’ frame-mounted rocker guards may leave a gap on body-lifted vehicles). As an added attribute the Rocker Knocker mounting plate is designed with drain reliefs to discourage debris from collecting in the lower body cavity.
Poison Spyder JK Rocker Knockers can be utilized as a stand alone component or can be used in conjunction with Poison Spyder JK Body Armor. JK Body Armor is a secondary line of defense against off road damage to your Jeep, protecting the Jeep by reaching above the Slider level up to the door line. Rocker Knockers do Not mount or use the Body Armor for additional structure.
SKU: 18-08-030-PSC$628.99 -
Rock Sliders
JK 4-Dr Rubber Body Armor Liners Poison Spyder – 18-08-310
0 out of 5(0)JK 4-Dr Rubber Body Armor Liners for Jeep Wrangler JK 2007-2016. Poison Spyder offers a precisely-cut rubber liner to install between the JK Body Armor and the factory sheet metal. Although the Body Armor can be mounted without the liner, this additional component adds protection from debris collecting between the Body Armor while protecting your Jeep factory sheet metal and paint.
The rubber liner is cut to match the lines of the Body Armor perfectly no cutting or trimming is required.
Liners are sold separately and do Not automatically come with the Body Armor kits.
Features:
Mounts between the Brawler Rocker and the Jeep body to keep debris from lodging in between, and to protect paintSKU: 18-08-310-PSC$68.98 -
Rock Sliders
SRC Classic Rock Rails 07-18 JK Wrangler 2 Door (Oem Style) Black Textured Smittybilt – 76635
Rock SlidersSRC Classic Rock Rails 07-18 JK Wrangler 2 Door (Oem Style) Black Textured Smittybilt – 76635
0 out of 5(0)The SRC Classic Rock rails utilize a solid one piece design and are used for maximum protection. They directly bolt up to factory holes. No Drilling required! Each set is available for 2 and 4 door Wranglers, which include molded end caps.
Details:- Fits 2007 to 2018 Wrangler and Rubicon
- 2-door models
- Black
- Made from 1/8 Inch steel
- Boxed design adds strength
- Easily bolts on using existing holes
- Protects underside of body from dents during off road use
SKU: n/a$226.99 -
Rock Sliders
SRC Classic Rock Rails 07-18 JK Wrangler 2 Door(Oem Style) W/ Step Black Textured Smittybilt – 76638
Rock SlidersSRC Classic Rock Rails 07-18 JK Wrangler 2 Door(Oem Style) W/ Step Black Textured Smittybilt – 76638
0 out of 5(0)The SRC Classic Side Protection With Step is designed for maximum protection and clearance. They directly bolt up to factory holes. Body Mount installation, No Drilling required! Each set of SRC Classic Sides are available for 2 and 4 door Wranglers, which include welded end caps. They definitely complement the front and rear bumpers.
Details:- Fits 2007 to 2018 Wrangler
- 2-door models
- Black textured
- No-Drill installation
- Body mount installation
SKU: n/a$329.99 -
Rock Sliders
SRC Classic Rock Rails 07-18 JK Wrangler 4 Door (Oem Style) Black Textured Smittybilt – 76636
Rock SlidersSRC Classic Rock Rails 07-18 JK Wrangler 4 Door (Oem Style) Black Textured Smittybilt – 76636
0 out of 5(0)The SRC Classic Rock rails utilize a solid one piece design and are used for maximum protection. They directly bolt up to factory holes. No Drilling required! Each set is available for 2 and 4 door Wranglers, which include molded end caps.
Details:- Fits 2007 to 2018 Wrangler and Rubicon
- 4-door models
- Black
- Made from 1/8 Inch steel
- Boxed design adds strength
- Easily bolts on using existing holes
- Protects underside of body from dents during off road use
SKU: n/a$247.99 -
Rock Sliders
SRC Classic Rock Rails 07-18 JK Wrangler 4 Door(Oem Style) W/ Step Black Textured Smittybilt – 76639
Rock SlidersSRC Classic Rock Rails 07-18 JK Wrangler 4 Door(Oem Style) W/ Step Black Textured Smittybilt – 76639
0 out of 5(0)The SRC Classic Side Protection With Step is designed for maximum protection and clearance. They directly bolt up to factory holes. Body Mount installation, No Drilling required! Each set of SRC Classic Sides are available for 2 and 4 door Wranglers, which include welded end caps. They definitely complement the front and rear bumpers.
Details:- Fits 2007 to 2018 Wrangler
- 4-door models
- Black textured
- No-Drill installation
- Body mount installation
SKU: n/a$360.99 -
Rock Sliders
SRC Rock Sliders 07-18 JK Wrangler 2 DR Steel Black Textured Powder Coat Smittybilt – 76633
Rock SlidersSRC Rock Sliders 07-18 JK Wrangler 2 DR Steel Black Textured Powder Coat Smittybilt – 76633
0 out of 5(0)The SRC Side Armor for the JKs utilize a one piece design and is manufactured from 1.75 Inch .120 wall tubing. Each SRC Side Armor utilizes a dual girder system provides the ultimate protection for the sides and under section of your Wrangler. SRC Side Armor can be utilize as protection as well as a step at the same time. Every SRC Side Armor bolts up to your vehicle without any drilling or modifications, giving you the ultimate protection from wheel to wheel. All SRC Side Armors come finished in our signature series Matte Black Textured Powder Coat.
Details:- Fits 2007 to 2018 JK Wrangler and Rubicon
- 2-door models
- Textured black powder coat
- Heavy-duty 2 Inch steel tube
SKU: n/a$329.99 -
Rock Sliders
SRC Rock Sliders 07-18 JK Wrangler 4 DR Steel Black Textured Powder Coat Smittybilt – 76634
Rock SlidersSRC Rock Sliders 07-18 JK Wrangler 4 DR Steel Black Textured Powder Coat Smittybilt – 76634
0 out of 5(0)The SRC Side Armor for the JKs utilize a one piece design and is manufactured from 1.75 Inch .120 wall tubing. Each SRC Side Armor utilizes a dual girder system provides the ultimate protection for the sides and under section of your Wrangler. SRC Side Armor can be utilize as protection as well as a step at the same time. Every SRC Side Armor bolts up to your vehicle without any drilling or modifications, giving you the ultimate protection from wheel to wheel. All SRC Side Armors come finished in our signature series Matte Black Textured Powder Coat.
Details:- Fits 2007 to 2018 JK Wrangler and Rubicon
- 4-door models
- Textured black powder coat
- Heavy-duty 2 Inch steel tube
SKU: n/a$350.99 -
Rock Sliders
XRC Rock Sliders 07-18 Wrangler JK 2DR No Step Black Textured Smittybilt – 76890
0 out of 5(0)Manufactured from 3/16 solid plate and designed to form to the vehicle and protect your ride from the elements. Features a 1.75 over rider tube that provides extra protection. Bolts up to factory holes and requires no drilling or modifications. Finished in a Two Stage Matte Black Powder Coat. 5 Year Limited Warranty.
Details:- Fits 2007 to 2018 Wrangler and Rubicon
- 2-door models
- Matte black powder coat
- Manufactured from 3/16 Inch solid plate
- Designed to form to the vehicle and protect your ride from the elements
- 5-year limited warranty
SKU: n/a$463.99 -
Rock Sliders
XRC Rock Sliders 07-18 Wrangler JK 2DR W/ Step Black Textured Smittybilt – 76897
0 out of 5(0)Manufactured from 3/16 solid plate and designed to form to the vehicle and protect your ride from the elements. Features a 1.75 over rider tube that provides extra protection. Bolts up to factory holes and requires no drilling or modifications. Finished in a Two Stage Matte Black Powder Coat. 5 Year Limited Warranty.
Details:
XRC Rock Slider- Finished in a Two Stage Matte Black Powder Coat
- Bolt-on installation
- Manufactured from 3/16 Inch solid plate
- Designed to form to the vehicle and protect your ride from the elements
- 5 year finish warranty
- Includes step
- Sold as a pair
SKU: n/a$463.99 -
Rock Sliders
XRC Rock Sliders 07-18 Wrangler JK 4DR No Step Black Textured Smittybilt – 76895
0 out of 5(0)Manufactured from 3/16 solid plate and designed to form to the vehicle and protect your ride from the elements. Features a 1.75 over rider tube that provides extra protection. Bolts up to factory holes and requires no drilling or modifications. Finished in a Two Stage Matte Black Powder Coat. 5 Year Limited Warranty.
Details:- Fits 2007 to 2018 Wrangler and Rubicon
- 4-door models
- Matte black powder coat
- Manufactured from 3/16 Inch solid plate
- Designed to form to the vehicle and protect your ride from the elements
- 5-year limited warranty
SKU: n/a$514.99
Showing 33–45 of 45 results