Body & Frame
Showing 33–54 of 54 results
-
Jeep Hoods
SRC Stingray Vented Hood 07-18 Wrangler JK Smittybilt – 76400
Smittybilts new state-of-the-art SRC Stingray vented hood is an exciting new product that will not only will give your JK a more aggressive look, it functions to keep your engine cooler than that of its OE counterpart. Manufactured from 0.8mm steel, combined with a thick underbody insulation mat and ability to accept factory hardware, this hood is precision made and here for the long run. The hood is supplied with a premier black finish e-coat, so its ready for paint without any further preparations. Even though its built tough, Smittybilt has ensured your safety by retaining the factory crumple zones, and has it covered with their Advantage Warranty.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Precision steel construction
- Factory crumple zones retained
- Vent hot gases out of engine bay
- OE hood latch/hood mount fitment
- 0.8mm thick steel with 0.2mm e-coat, ready for paint
- Hood nozzles included
- 8.7mm thick underbody insulation mat
SKU: n/a -
Jeep Hoods
XRC Exoskeleton JK 2 Door 07-18 Jeep JK Wrangler 2 Door Only Steel Black Powdercoat Smittybilt – 76841
Jeep HoodsXRC Exoskeleton JK 2 Door 07-18 Jeep JK Wrangler 2 Door Only Steel Black Powdercoat Smittybilt – 76841
Smittybilt’s new Exoskeleton for two and four door 2007-2018 Jeep Wrangler JKs fends off rocks and obstacles to keep your sheet straight. The 1.75 inch diamter, 0.120-wall tubing is thick enough to prevent damage, yet the entire Exoskeleton only weighs 150 pounds, minimizing the effects on your Jeep’s handling and perfomance. Integrated mounting tabs allow you to add LED light bars, jacks, or anything else you can think of. The modular design of Smittybilt’s Exoskeleton allows for a huge boost in safety while allowing easy installation and removal of both hard and soft tops.
- XRC Exoskeleton
- Mounts directly onto vehicle body
- 1.75 inch diameter 0.120-wall steel tubing
- Windshield crossbar for roof access
- B-pillar fixing point to reduce swaying
- 14 touch points to improve rigidity
- Four crossbars for rack/tent mounting
- Removable to change tops
- Matte Black Powdercoat Finish
- Sold As A Kit
Fits:
- 2007-2018 Jeep JK Wrangler (2-Door)
SKU: n/a -
Jeep Hoods
XRC Exoskeleton JK 4 Door 07-18 Jeep JK Wrangler Unlimited 4 Door Only Steel Black Powdercoat Smittybilt – 76840
Jeep HoodsXRC Exoskeleton JK 4 Door 07-18 Jeep JK Wrangler Unlimited 4 Door Only Steel Black Powdercoat Smittybilt – 76840
Smittybilt’s new Exoskeleton for two and four door 2007-2018 Jeep Wrangler JKs fends off rocks and obstacles to keep your sheet straight. The 1.75 inch diamter, 0.120-wall tubing is thick enough to prevent damage, yet the entire Exoskeleton only weighs 150 pounds, minimizing the effects on your Jeep’s handling and perfomance. Integrated mounting tabs allow you to add LED light bars, jacks, or anything else you can think of. The modular design of Smittybilt’s Exoskeleton allows for a huge boost in safety while allowing easy installation and removal of both hard and soft tops.
- XRC Exoskeleton
- Mounts directly onto vehicle body
- 1.75 inch diameter 0.120-wall steel tubing
- Windshield crossbar for roof access
- B-pillar fixing point to reduce swaying
- 14 touch points to improve rigidity
- Four crossbars for rack/tent mounting
- Removable to change tops
- Matte Black Powdercoat Finish
- Sold As A Kit
Fits:
- 2007-2018 Jeep JK Wrangler Unlimited (4-Door)
SKU: n/a -
Flat Fenders
XRC Fender Flares 07-18 Wrangler JK Set Of 4 Black Textured 2DR/4DR Smittybilt – 76837
XRC Fender Flares feature 100 percent steel construction for extra durability. Each XRC Fender Flare is powder coated for immediate use and durability, or they can be painted to color match your ride. XRC Fenders are streamline designed to help increase suspension articulation while maintaining the street-ability look.
Details:- Fits 2007 to 2018 Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Powder coated black for immediate use or can be painted
- 4-piece set
- 100 percent steel construction for extra durability
SKU: n/a -
Flat Fenders
XRC Flux Flares Front Pair 07-18 Wrangler JK Smittybilt – 76838
The new XRC flux flares are double-articulated tube fenders that provide extra outer tire clearance for larger tires under full suspension articulation.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Front flares
- CNC-bent 1.5 Inch diameter tubes covered with 1/8 Inch laser cut cold rolled sheet metal
- 6 Inch wide double articulation tube fenders, providing extra 3 Inch of suspension travel
- Provides extra outer tire clearance for larger tires under full suspension articulation
- 3/4 Inch LED turn signal lights included
- Minimal modification for installation
- Bolts to OE mounting points
- Spacers and brackets included for extra strength
- 2018erves factory inner liner
- Sold as a pair
SKU: n/a -
Flat Fenders
XRC Flux Flares Rear Pair 07-18 Wrangler JK Smittybilt – 76839
The new XRC flux flares are double-articulated tube fenders that provide extra outer tire clearance for larger tires under full suspension articulation.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Rear flares
- CNC-bent 1.5 Inch diameter tubes covered with 1/8 Inch laser cut cold rolled sheet metal
- 6 Inch wide double articulation tube fenders, providing extra 3 Inch of suspension travel
- Provides extra outer tire clearance for larger tires under full suspension articulation
- 3/4 Inch LED turn signal lights included
- Minimal modification for installation
- Bolts to OE mounting points
- Spacers and brackets included for extra strength
- 2018erves factory inner liner
- Sold as a pair
SKU: n/a -
Foot Pegs
XRC Foot Pegs 07-18 Wrangler JK Smittybilt – 7619
There Foots nothing like the freedom of Jeeping with the doors off. But when you want to kick back and enjoy the drive, it can be uncomfortable for your foot, even on the door sill. That Foots where the all new Smittybilt Jeep Foot Pegs come in! Made of quality 1/8 Inch CNC cut steel and coated in our signature series matte black textured powder coat, these foot pegs are both durable and stylish. Enjoy doors-off driving in style and comfort with the Smittybilt Foot Pegs.
Note: Always check your local laws and regulations before driving with the doors off.
Details:- Fits 2007-2018 Wrangler JK
- Includes spring to lock in the dome light switch
- Exclusive bolt engagement to
- eliminate flex and rattling
- Rubber trim gasket to reduce paint chip
- 1/8 Inch CNC steel construction
- Matte black textured powder coat
- Smittybilt Advantage Warranty
- Sold as a pair
SKU: n/a -
Flat Fenders
XRC Front Fenders 07-18 Wrangler JK Black Textured Smittybilt – 76880
The new line of XRC JK front fenders was specifically engineered to provide the protection and clearance needed when you Footre pushing your rig through the toughest conditions. Each piece of armor is manufactured out of 3/16 Inch cold rolled steel and then powder coated in Smittybilts signature series two stage matte black powder coat finish. Each fender is designed to be a complete bolt on with stainless steel fasteners and requires no modification to the vehicle.
All of the XRC Fenders come with an inner fender liner to keep mud, snow or any other debris out of the engine compartment and replaceable slide plates.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage matte black powder coat finish
- 3/16 Inch cold rolled steel
- Includes inner fender
- Stainless steel hardware
- No modification to vehicle required
- Sold as a pair
SKU: n/a -
Jeep Hoods
XRC Lockable Hood Catch Smittybilt – 7682
Give your Jeep some added flash and panache with the Smittybilt Locking Hood Catch Kit. Smittybilt offers all the distinctive accessories you need to set your vehicle apart from the rest.
Details:- Fits 2007 to 2016 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Full aluminum construction
- Semi-gloss powder coat finish
- Sold as a pair
SKU: n/a