Category: Body Armor
Tags: Armor, Bumpers & Armor, Corner Armor, Exterior Parts & Car Care
Brand: Smittybilt
Body Armor
XRC Flat Armor Skins Front 07-18 Wrangler JK 2 DR Black Textured Smittybilt – 76981
Smittybilt Foots all new XRC Armor Flat Armor Skins for Jeep JKs are manufactured from 3/16 Inch cold roll steel, and are hand crafted to insure a perfect fit every time. Each Flat Skin comes complete with everything you need to install these guards on your Jeep, including stainless steel hardware and detailed installation instructions. They are finished in a black powder coat and can be used with our XRC Armor Rocker Guards.
Details:
- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 door models
- Made of 1/8 cold rolled steel to provide maximum protection
- Contours perfectly to the OE panels
- Ability to bolt the stock fenders back on
- Two-stage textured matte black finish
- Powder coat finish – 5 year limited warranty
- Drilling required for installation
- All mounting hardware included
- Sold as a pair
$360.99
Related products
-
Hitches
Ball Mount Adjustable 10 Inch Drop Aluminum Smittybilt – 2940
0 out of 5(0)Constructed with new space age fabric, Climate Cover protects your vehicle from the elements while allowing the paint to breathe. Soft and durable fabric pampers paint finish and protects from sun, dirt, dust, moisture and pollution. The unique diamond bond pattern allows damaging trapped air and moisture to escape preventing paint deterioration. UV protection against sun and heat buildup and the spun bond polypropylene is a naturally water repellent material. Double stitched elastic hems for a custom fit. Gray with heavy-duty grommets. Bag, lock and cable included.
Details:- Fits 1955 to 2006 Wrangler and CJ
- Gray
- Protects your vehicle from the elements
- Soft and durable fabric
- UV protection against sun and heat buildup
- Naturally water repellent material
- Double stitched elastic hems
- Bag included
SKU: n/a$92.99 -
Hitches
Ball Mount Adjustable 4 Inch Drop Aluminum Smittybilt – 2934
0 out of 5(0)Complete set for the ultimate look, includes set of hood hinges, windshield tie down kit, hood vent, footman loop. Hood catches not included.
Details:- Fits 1976 to 1995 YJ/CJ Wrangler
- Stainless steel
- Includes set of hood hinges, windshield tie down kit, hood vent, footman loop
SKU: n/a$56.99 -
Hitches
Receiver Ball 2 5/16 Inch Smittybilt – 2901
0 out of 5(0)Smittybilt Gloves are anatomically engineered with direct sonic welded rubber tops and EVA foam palm pads for improved protection. The feature reinforced finger tips, palm and knuckle protection.
Details:
Smittybilt Trail Gloves
Black
Knuckle Protection
EVA Foam Palm Pads
Pair
Available in Xtra Large onlySKU: n/a$11.99 -
Body Armor
XRC Rear Corner Guards 07-18 Wrangler JK 4DR Black Textured Smittybilt – 76882
0 out of 5(0)The new line of XRC JK full rear corners was specifically engineered to provide the protection and clearance needed when you Footre pushing your rig through the toughest conditions. Each piece of armor is manufactured out of 3/16 Inch cold rolled steel and then powder coated in Smittybilt Foots signature series two stage matte black powder coat finish. Each corner includes stainless steel fasteners.
Details:- Fits 2007 to 2018 Wrangler Unlimited and Rubicon Unlimited
- 4-door models
- Two stage matte black powder coat finish
- 1/8 Inch cold rolled steel
- Stainless steel hardware
SKU: n/a$566.99 -
Body Armor
JK 4-Dr Crusher Corners LED Tail & Backup Lights Poison Spyder – 18-05-021
0 out of 5(0)JK 4-Dr Crusher Corners LED Tail and Backup Lights for Jeep Wrangler JK 2007-2016. Poison Spyder Crusher Corners for the JK provide ultimate protection for the vulnerable rear corners of your Jeep JK. Crusher Corners are Full-corner protectors, extending from the rear tailgate, around the side, over the wheel openings and all the way to the door openings. Made of rugged 1/8 inch steel, JK Crusher Corners may be used with the Stock JK fender flares or with Poison Spyder JK Rear Crusher Flares for the ultimate combination of rear corner armor.
Features:
Tool-formed from 1/8 inch plate steel for a glove-like fit to the JKs contoured body lines
May be used with Stock fender flares, Poison Spyder Crusher Flares or Most other MFG aftermarket JK flares
Cut to accept 4 round LED taillights (sold separately)
Stainless steel hardware and install instructions included
Poison Spyder JK Crusher Corners are unique among aftermarket corner armor, in that they provide Full coverage while conforming to the compound curves and subtle contours of the JK body lines. Competitor Full corner protectors are brake-formed from flat steel, and may require the removal of large swaths of the Stock sheet metal in order to install them.Poison Spyder Crusher Corners are tool-formed to match the JK body lines in a close-fitting overlay, requiring no cutting of the body except to clearance for the flush-mount LED lights (on LED-ready versions). JK Crusher Corners come in a complete kit with stainless steel button head hardware. Drilling is required, as is installation of threaded nut-serts (Poison Spyder provides the nut-serts, a simple nut-sert installation tool and detailed instructions). JK Crusher Corners are shipped as bare steel.
Made for LED Taillights and Backup Lights:
These Crusher Corners are designed to work with high intensity, low-profile, 4 inch round LED taillights [p/n 41-04-050 (red) or 41-04-051 (clear/red), sold separately] .These LED lights are brighter with less power draw than the OE taillights, and will last longer than the incandescent bulbs. Best of all, they are flush-mounted, barely protruding from the surface of the Crusher Corner, to better survive close encounters with rocks, trees and canyon walls that may knock off the bulky Stock taillight housings.
These Crusher Corners are also cut to work with 2.5 inch round LED backup lights (p/n 41-04-300, sold separately). These cut-outs are made with a precision 5-axis laser in order to ensure a perfect fit. Note that LED taillights will require the installation of load resistors (p/n 41-04-650, sold separately) to provide the correct load resistance and keep the Jeep computer from thinking it has a taillight out, causing a faster flash rate. For the easiest installation of LED taillights and backup lights, use Poison Spyder plug and play, all-inclusive JK LED Tail and Reverse Light Wiring Kit (p/n 41-08-010, sold separately). There are different Crusher Corners available that are designed to accept just the LED Taillights (p/n 18-05-020), or to retain the Stock OE taillights (p/n 18-05-022, or Blank (no taillight cut-outs, p/n 18-05-024).
Note: Installation of this product includes drilling and installing 5/16-18 nut-serts. We provide a rudimentary tool in the kit for installing the nut-serts, however it can be tedious and frustrating to use. If you are going to be installing several products that require the use of nut-serts, you may find it worth the expense to purchase a Professional Nut-Sert Installation Tool and 5/16-18 Mandrel & Nose piece for it.. Also, the drill size required for this, 17/32 inch
SKU: 18-05-021-PSC$448.99