Track Bar
Rubicon Express Front Track Bar TJ/XJ/MJ/ZJ – RE1600
TJ/XJ/MJ/ZJ Front Track Bar. Correct alignment and handling problems on lifted vehicles with our front adjustable chromoly track bar. Easy installation works on vehicles with 3.5 inch – 4.5 inch of lift. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance.
Details:
- Fits 1997 to 2006 Jeep Wrangler TJ, Rubicon and Unlimited
- Fits 1984 to 2001 Jeep Cherokee XJ
- Fits 1986 to 1992 Jeep Comanche
- Fits 1993 to 1998 Jeep Grand Wagoneer ZJ
- Adjustable 3.5-4.5 Inches Lift
- Silver
$169.99
Related products
-
Track Bar
Rough Coutry Front Forged Adjustable Track Bar for 4-6.5-inch Lifts 1042
0 out of 5(0)When you’re way off the beaten path the last thing you should worry about is how you’re getting home. Introducing Rough Country’s Forged Adjustable Track Bar for Jeep XJs. This massive 16-lb Track Bar is nearly twice the weight of your factory Track bar, offering you unparalleled support and the ultimate peace of mind in any driving situation.
For those who are serious about flexing, crawling, and pushing your Jeep to the limits, Rough Country’s Forged Adjustable Track Bar is a must. This new track bar is made of forged steel and features rubber Clevite bushings and a beefy construction that will dwarf stock equipment. This design allows the bar to keep your axles tame even under pure off-road torture.
Best of all, it’s simple to install and fully adjustable on the vehicle; meaning no removal required, no trial and error lining it up, and no more wasted time just to dial in your bar. All Rough Country forged Track Bars ship with a Lifetime Replacement Warranty.
Rough Country’s Front Forged Adjustable Track Bar for 4-6.5-inch Lifts – 1042
SKU: 1042$139.95 -
Track Bar
Rubicon Express Adjustable Front Track Bar – RE1673
0 out of 5(0)Replaces front JK stock track bar on 2 door and 4 door JKs with 0-3.5 Inch of lift. The adjustable front track bar is designed specifically for the JK to give maximum clearance between steering components and re-center the front axle after installation of lift.
Technical Details
- 07-Current Wrangler JK, 2 and 4 Door
- Designed for 0-3.5 Inch lift
- Re-centers front axle after lift installation
- Bolt-in installation using factory mount
SKU: RE1673$169.99 -
Track Bar
Rough Coutry Jeep Front Forged Adjustable Track Bar | 2.5-6in (2018 Wrangler JL) 11061
0 out of 5(0)When you’re way off the beaten path the last thing you should worry about is how you’re getting home. Introducing Rough Country’s Forged Adjustable Track Bar for Jeep JL. This massive 16lb Track Bar is nearly twice the weight of your JL’s factory Track bar, offering you unparalleled support and the ultimate peace of mind in any driving situation. For those who are serious about flexing, crawling, and pushing your lifted JL to the limits, Rough Country’s Forged Adjustable Track Bar is a must. This new track bar is made of forged steel and features rubber Clevite bushings and a beefy construction that will dwarf stock equipment. This design allows the bar to keep your axles tame even under pure off-road torture. Best of all, it’s simple to install and even easier to adjust! As you lift a Jeep, the axles become off centered. This new Forged Adjustable Track Bar gives you the ability to adjust and re-center the axles while mounted to the vehicle. This bolt-on product can be attached in just minutes giving you a nearly instant upgrade. While many aftermarket track bars are adjustable, Rough Country’s new bar is fully adjustable on the vehicle; meaning no removal required, no trial and error lining it up, and no more wasted time just to dial in your bar. Simply attach to the vehicle and dial in your adjustable bar using our innovative clamp and sleeve system.
SKU: 11061$139.95 -
Track Bar
Rubicon Express CVO Drive Shaft Front 38.5 Inch Auto Trans Only 1310 Series Yolk 07-18 JK – RE1883-385
Track BarRubicon Express CVO Drive Shaft Front 38.5 Inch Auto Trans Only 1310 Series Yolk 07-18 JK – RE1883-385
0 out of 5(0)JK Front CVO Drive Shaft For Automatic Transmission. Spicer drive shafts and components are as good as they get. This drive shaft is compatible With Atlas transfer cases and any other 1310 series CV yoke. Measurements are taken center to center on the u-joint With the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- Fits 2012 to 2014 Automatic Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-Door Models
- Automatic trans only
- Front CVO Drive Shaft
- 1310 Series Yoke
- Shaft Length: 38.5 Inches
- Finish Color: Black
- 2012-Present With Automatic Transmissions
- Requires RE1810 Yoke
SKU: RE1883-385$420.99 -
Jeep Track Bar
DV8 Offroad TBJK-01F-HKJT Track Bar Front Bushing Style 07-18 Wrangler JK Black
0 out of 5(0)DV8 is proud to introduce our bushing style adjustable track bars, newest addition to the DV8 suspension line.
Features:- Front Bushing Style Track Bars
- Fully adjustable for a perfectly aligned ride
- Over double the diameter of the factory track bars at 1.5 inches (Front)
- Thick .375 inch DOM steel tubing (Front)
- Maintains the correct geometry with lift for better handling
- Can accommodate from 1-6 inches of suspension lift
- DOM Steel tubing
- Quiet ride high flex rubber bushings
- Zinc Plated and Powdercoated for corrosion resistance
- Fits 2007- 2018 Jeep JK Models (2 Door/4 Door)
Note:
- Not Compatible With Frame Mounted Track bar Drop Brackets
SKU: TBJK-01F$123.36$199.00