Track Bar
Rubicon Express Front Track Bar Extreme Duty 07-18 JK/JKU W/Dana 60 – RE1680
JK Front Track Bar. Correct alignment and handling problems on lifted vehicles With our front adjustable chromoly track bars. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance. This track bar cannot be mounted onto the Jeep without using #R/ERE1675 front track bar bracket.
Details:
- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Extreme duty
- Must be used With RE1675 track bar bracket
$184.99
Related products
-
Track Bar
Rubicon Express Rear Track Bar 07-18 JK/JKU – RE1690
JK Rear Track Bar replaces the stock rear track bar on 2 and 4-door Jeep Jeep Wrangler JKs With lift heights of 3.5-inches or more. The rear track bar is adjustable in length and designed With a double bend specifically for the JK to give maximum clearance between suspension components. This allows precise centering of the rear axle after installation of a suspension lift. The RE1690 is made from 1-3/8 x 3/16 inch wall 4130 chromoly. It is designed to clear many after-market axle housings including the Dana 44, 60 and Ford 9 inch.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
SKU: RE1690 -
Track Bar
JK Rear Forged Adjustable Trackbar Kit 07-Pres Wrangler JK TeraFlex
%3Cp%3EThe+TeraFlex+JK+rear+adjustable+trackbar+is+230+Percent+stronger+than+the+factory+trackbar+and+uses+OE+style+rubber+bushings+with+an+additional+rate+plate+for+superior+handling+and+responsive+control.+This+adjustable+trackbar+allows+lateral+adjustment+of+the+axle+for+proper+axle+alignment.+No+bracketry+changes+are+necessary%2C+and+it+is+a+complete+bolt+on+component.+The+trackbar+is+designed+to+maximize+rear+passenger+spring+clearance+and+cycle+through+the+full+movement+of+suspension+travel+without+interfering+with+other+components.+This+trackbar+can+be+used+with+or+without+a+trackbar+relocation+bracket.+Fits+all+JK+Wrangler+models+with+0+inch-6+inch%2B+of+lift.%3Cbr+%2F%3E%3Cstrong%3EFits%3A%3C%2Fstrong%3E%3C%2Fp%3E%0A%3Cul%3E%0A%3Cli%3E07-Present+Jeep+Wrangler+JK%3C%2Fli%3E%0A%3Cli%3E07-Present+Jeep+Wrangler+Unlimited+JK%3C%2Fli%3E%0A%3C%2Ful%3E%0A%3Cp%3E%3Cstrong%3EDetails%3A%3C%2Fstrong%3E%3C%2Fp%3E%0A%3Cul%3E%0A%3Cli%3EJK+Rear+Forged+Adjustable+Trackbar+Kit%3C%2Fli%3E%0A%3Cli%3E230+Percent+Stronger+Than+Factory+Trackbar%3C%2Fli%3E%0A%3Cli%3ECan+Be+Used+With+Or+W%2FOut+Relocation+Bracket%3C%2Fli%3E%0A%3Cli%3EFor+JK+Jeeps+With+0-6+Inches+Lift%3C%2Fli%3E%0A%3Cli%3EBlack+Powdercoat+Finish%3C%2Fli%3E%0A%3C%2Ful%3E%0A
SKU: 1754418-FNNT -
Track Bar
Rubicon Express Front Track Bar TJ/XJ/MJ/ZJ – RE1600
TJ/XJ/MJ/ZJ Front Track Bar. Correct alignment and handling problems on lifted vehicles with our front adjustable chromoly track bar. Easy installation works on vehicles with 3.5 inch – 4.5 inch of lift. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance.
Details:- Fits 1997 to 2006 Jeep Wrangler TJ, Rubicon and Unlimited
- Fits 1984 to 2001 Jeep Cherokee XJ
- Fits 1986 to 1992 Jeep Comanche
- Fits 1993 to 1998 Jeep Grand Wagoneer ZJ
- Adjustable 3.5-4.5 Inches Lift
- Silver
SKU: RE1600 -
Jeep Track Bar
DV8 Offroad TBJK-01F-HKJT Track Bar Front Bushing Style 07-18 Wrangler JK Black
DV8 is proud to introduce our bushing style adjustable track bars, newest addition to the DV8 suspension line.
Features:- Front Bushing Style Track Bars
- Fully adjustable for a perfectly aligned ride
- Over double the diameter of the factory track bars at 1.5 inches (Front)
- Thick .375 inch DOM steel tubing (Front)
- Maintains the correct geometry with lift for better handling
- Can accommodate from 1-6 inches of suspension lift
- DOM Steel tubing
- Quiet ride high flex rubber bushings
- Zinc Plated and Powdercoated for corrosion resistance
- Fits 2007- 2018 Jeep JK Models (2 Door/4 Door)
Note:
- Not Compatible With Frame Mounted Track bar Drop Brackets
SKU: TBJK-01F -
Track Bar
Rubicon Express Front Forged Track Bar and HD Tie Rod with Forged Ends – JKHD1
The new Rubicon Express JK Wrangler front forged track bar features a heat treated steel construction designed to eliminate deflection caused by oversized tires or extreme side load. It features an adjustable sleeved collar which allows for precise axle alignment while still on the vehicle preventing the need to disassemble the suspension as well as OE style bushings for ultimate control and handling. The high clearance design allows for fitment from 0-6 Inch of lift with clearance throughout the suspension cycle. The heavy duty tie rod bar for your 07+ JK is tough enough for the biggest tires and hardest trails. Constructed of 1.5-inch .250-wall 4140 chromoly steel fitted with forged 1-ton tie drop bar, bending your steering is a thing of the past. Works with Dana 30/44/60.
Technical Details
- 07-Current Wrangler JK, 2 and 4 Door
- With 0-6 inch lift kits
- Heat treated forged steel
- Adjustable sleeved collar
- High clearance design for full clearance through out suspension cycle
- Stock style bushings
- Works with aftermarket diff covers
- Greaseable/replaceable 1-ton tie rod ends
- All metal design 1.250 Inch diameter induction hardened alloy steel (5140) ball studs
- Offset design provides clearance for larger axle housings and covers
- Can be used with OE wheels and back spacing
- Machined billet aluminum steering stabilizer mount included
SKU: JKHD1
