Track Bar
Rubicon Express CVO Drive Shaft Front 38.5 Inch Auto Trans Only 1310 Series Yolk 07-18 JK – RE1883-385
JK Front CVO Drive Shaft For Automatic Transmission. Spicer drive shafts and components are as good as they get. This drive shaft is compatible With Atlas transfer cases and any other 1310 series CV yoke. Measurements are taken center to center on the u-joint With the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:
- Fits 2012 to 2014 Automatic Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-Door Models
- Automatic trans only
- Front CVO Drive Shaft
- 1310 Series Yoke
- Shaft Length: 38.5 Inches
- Finish Color: Black
- 2012-Present With Automatic Transmissions
- Requires RE1810 Yoke
$420.99
Related products
-
Track Bar
Rough Coutry Jeep Front Forged Adjustable Track Bar | 2.5-6in (2018 Wrangler JL) 11061
0 out of 5(0)When you’re way off the beaten path the last thing you should worry about is how you’re getting home. Introducing Rough Country’s Forged Adjustable Track Bar for Jeep JL. This massive 16lb Track Bar is nearly twice the weight of your JL’s factory Track bar, offering you unparalleled support and the ultimate peace of mind in any driving situation. For those who are serious about flexing, crawling, and pushing your lifted JL to the limits, Rough Country’s Forged Adjustable Track Bar is a must. This new track bar is made of forged steel and features rubber Clevite bushings and a beefy construction that will dwarf stock equipment. This design allows the bar to keep your axles tame even under pure off-road torture. Best of all, it’s simple to install and even easier to adjust! As you lift a Jeep, the axles become off centered. This new Forged Adjustable Track Bar gives you the ability to adjust and re-center the axles while mounted to the vehicle. This bolt-on product can be attached in just minutes giving you a nearly instant upgrade. While many aftermarket track bars are adjustable, Rough Country’s new bar is fully adjustable on the vehicle; meaning no removal required, no trial and error lining it up, and no more wasted time just to dial in your bar. Simply attach to the vehicle and dial in your adjustable bar using our innovative clamp and sleeve system.
SKU: 11061$139.95 -
Drive Shaft
Rubicon Express CVF Drive Shaft Rear 18.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-185
Drive ShaftRubicon Express CVF Drive Shaft Rear 18.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-185
0 out of 5(0)TJ CVF Rear Drive Shaft. Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 18.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-185$358.99 -
Drive Shaft
Rubicon Express CVF Drive Shaft Rear 20.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-205
Drive ShaftRubicon Express CVF Drive Shaft Rear 20.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-205
0 out of 5(0)TJ CVF Rear Drive Shaft. Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 20.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-205$358.99 -
Track Bar
Rock Krawler JK 1.5-3.5 Inch Lift Front Adjustable Track Bar RK02024B
0 out of 5(0)Our Bomb Proof front track bar features:
- Adjustable End (for precise centering of the front axle)
- Made from 1.5 Inch Diameter Solid Alloy Steel
- Abuse Proof Lifetime Warranty.
Includes:
(1) Bomb proof front track barNotes:
Valid for lift heights of 2 Inch to 4 Inch
Any lift larger than 4 Inch we recommend a front track bar relocation bracket and drag link flip kitSKU: RK02024B$215.00$226.32 -
Track Bar
Rubicon Express Front Forged Track Bar and HD Tie Rod with Forged Ends – JKHD1
0 out of 5(0)The new Rubicon Express JK Wrangler front forged track bar features a heat treated steel construction designed to eliminate deflection caused by oversized tires or extreme side load. It features an adjustable sleeved collar which allows for precise axle alignment while still on the vehicle preventing the need to disassemble the suspension as well as OE style bushings for ultimate control and handling. The high clearance design allows for fitment from 0-6 Inch of lift with clearance throughout the suspension cycle. The heavy duty tie rod bar for your 07+ JK is tough enough for the biggest tires and hardest trails. Constructed of 1.5-inch .250-wall 4140 chromoly steel fitted with forged 1-ton tie drop bar, bending your steering is a thing of the past. Works with Dana 30/44/60.
Technical Details
- 07-Current Wrangler JK, 2 and 4 Door
- With 0-6 inch lift kits
- Heat treated forged steel
- Adjustable sleeved collar
- High clearance design for full clearance through out suspension cycle
- Stock style bushings
- Works with aftermarket diff covers
- Greaseable/replaceable 1-ton tie rod ends
- All metal design 1.250 Inch diameter induction hardened alloy steel (5140) ball studs
- Offset design provides clearance for larger axle housings and covers
- Can be used with OE wheels and back spacing
- Machined billet aluminum steering stabilizer mount included
SKU: JKHD1$589.99