Rough Coutry Jeep Tubular Front Fender Flares (07-18 Wrangler JK) 10531

JK Rear Crusher Flares Standard Width (Steel) Black for Jeep Wrangler JK 2007-2016. The Jeep JK thin sheetmetal fenders and stock plastic flares are among the most vulnerable body components when traversing the trail. The Poison Spyder JK Rear Crusher Flare kit improves both the aesthetics and durability of your Jeep during your off road adventures. Poison Spyder Standard Width JK Crusher Flares provide tire coverage similar to the factory flares, with the added advantage of a better departure angle and outer tire clearance. Steel Crusher Flares and Poison Spyder exclusive Inner Brace system are the ultimate in fender armor for your JK, with the toughness to withstand punishing scrapes with granite canyon walls. This product is finished in black with Poison Spyder proprietary SpyderShell Armor Coat process.
Features:

• Replace flimsy plastic OE fender flares with heavy duty steel
• Standard Width mimics approximate width of Stock fender flares
• CNC laser cut 3/16 inch mounting plate and 1/8 inch top plate
• NC bent 1.5 inch OD X .120 wall DOM tube outer rub rail
• Internal bracing kit transfers impact loads to Jeep heavy gauge inner tub structure
• Black Spydershell Armor Coat Finish
• Sold As A Pair

Roll-Bent Outer Tubes
Poison Spyder Crusher Flares were the first all-metal armored flare on the market when the Jeep JK debuted with the 2007 model year. Since then dozens of companies have tried to duplicate the original. But Poison Spyder stays a step ahead, and now Crusher Flares are the only metal armored flare on the market constructed with CNC Roll-Bent Outer Tubes. Using the latest technology in computer-controlled roll-benders to form these tubes results in several advantages. First, and most obviously, roll-bending results in a much more elegant product, whose subtle curves match the lines of the Jeep JK perfectly. Our competitors products are easy to spot because parts made on traditional tube benders have sharp, segmented bends that simply cant match the Jeeps body lines as well. The other benefit is that roll-bending is a gentler process, resulting in less weakening of the tube where it stretches or compresses around bends. Only Poison Spyder Crusher Flares are manufactured with this state-of-the-art CNC roll-bending process!
SpyderShell Armor Coat
SpyderShell is more than just powder coating—its a complete system that includes the state of the art in preparation, application, materials and packaging to ensure that your SpyderShell products stay looking great for years. The SpyderShell process has been engineered to provide your Poison Spyder product with years of unmatched great looks, corrosion protection and weather-resistance. Our proprietary 6-stage system starts with media blasting the entire part, to remove contaminents and prep the metal surface for the best possible adhesion. Next, any seams are sealed with 3M Scotch-Weld to block moisture from entering and causing corrosion where the powder can Not reach. The first coat to be applied is a zinc-rich powdered black primer, which is baked on to form an impenetrable bond between the metal product and the coating. The primer is black–rather than traditional gray–so that any rock chips or trail damage are less conspicuous. The final top coat is an industrial grade, super-durable architectural finish in semi-gloss black, which is engineered to retain its appearance through years of exposure to sun and weather. SpyderShell is a coating process unmatched by any other Jeep armor aftermarket manufacturer, for which we are confident in offering a 5-year warranty on materials and workmanship.
Exclusive Inner Brace Set
Every set of Poison Spyder JK Crusher Flares comes with a set of inner braces that tie the Crusher Flare in to the sturdier, heavier-gauge steel of the JK inner body tub structure. Competitors JK Flare products simply bolt directly to the outer layer of the JK body sheetmetal. But as any JK owner knows, the exterior sheetmetal is very thin and flexible. Simply bolting a heavy duty fender directly to the exterior sheetmetal without the inner bracing is a disaster waiting to happen. Regardless of how sturdy the flare is built, upon contact with rocks, trees, etc., it will simply push in and deform the flimsy sheetmetal it is bolted to, possibly causing expensive and unsightly damage. The Inner Brace Set that comes with Poison Spyder Crusher Flares effectively bypasses the outer sheetmetal, instead transferring those forces to the much stronger inner structure of the Jeep. These Inner Braces are CNC laser cut, brake-formed for a great fit and simple installation.
Provisions for LED Marker Lamps
The JK Rear Crusher Flare Kit comes standard with mounting provisions to place a small 3/4 inch LED marker lamp inside the flare just rearward of the tire. The LED can be wired in to the Jeeps running lights or turn signal circuits. 3/4 inch amber LED lamps are available separately from Poison Spyder.
Steel or Aluminum?
Not sure whether to choose steel or aluminum for your Crusher Flares? Aluminum is lighter in weight, so might be the best choice for those looking to save weight on their heavy JKs in order to improve fuel mileage and gain an advantage off-road. However, when wheeling with aluminum flares it is up to the driver to use more care and finesse, as the aluminum components are Not going to be able to withstand the same direct impacts that steel can. The outer tube on our aluminum Crusher Flares is beefy .188 wall thickness. Compared to our steel Crusher Flares which use .120 wall DOM steel tubing. The thicker tube wall recoups some of the strength lost by going to aluminum, however the steel versions will still be stronger in a direct impact with the rocks. Aluminum JK Crusher Flares are less than half the weight of the steel version. Which is best for you will depend on your particular intended use of the Jeep, driving style and other factors.

JK Front Crusher Flares Standard Width (Steel) for Jeep Wrangler JK 2007-2016. The Jeep JKs thin sheet metal fenders and Stock plastic flares are among the Most vulnerable body components when traversing the trail. The Poison Spyder JK Front Crusher Flare kit improves both the aesthetics and durability of your Jeep during your off road adventures. Poison Spyder Standard Width JK Crusher Flares provide tire coverage similar to the factory flares, with the added advantage of a better approach angle and outer tire clearance. Steel Crusher Flares and Poison Spyders exclusive Inner Brace system are the ultimate in front fender armor for your JK, with the toughness to withstand punishing scrapes with granite canyon walls. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.

Features:

• Replace flimsy plastic OE fender flares with heavy duty steel
• Standard Width mimics approximate width of Stock fender flares
• CNC laser cut 3/16 inch mounting plate and 1/8 inch top plate
• CNC roll-bent 1.5 inch OD X .120 wall DOM tube outer rub rail
• Roll-bending gives smooth, sweeping, continuous bends that match the Jeep lines perfectly
• Internal bracing kit transfers impact loads to Jeep heavy gauge inner tub structure
• Bare Finish
• Sold As A Pair

Construction
Steel JK Crusher Flares are constructed using 1.5 inch X .120 wall DOM (Drawn-Over-Mandrel) structural tubing as the outer rub rail. This DOM tubing provides better resistance to crushing, kinking, and bending than competitors flares made with thinner wall, welded seam tubing. The foundation of the Crusher Flare is a CNC laser cut, 3/16 inch thick steel mounting plate, precision brake-formed to conform to the subtle curves of the JKs body panels. Mounting holes are countersunk for the use of flat-head stainless steel mounting hardware. The top plate is CNC laser cut 1/8 inch aluminum plate, which is hand formed around the curves of the Crusher Flare for a factory appearance that matches the JKs organic body lines better than any other aftermarket metal flare.
Exclusive Inner Brace Set
Every set of Poison Spyder JK Crusher Flares comes with a set of inner braces that tie the Crusher Flare in to the sturdier, heavier-gauge steel of the JKs inner body tub structure. Competitors JK Flare products simply bolt directly to the outer layer of the JKs body sheet metal. But as any JK owner kNows, the exterior sheet metal is very thin and flexible. Simply bolting a heavy duty fender directly to the exterior sheet metal without the inner bracing is a disaster waiting to happen. Regardless of how sturdy the flare is built, upon contact with rocks, trees, etc., it will simply push in and deform the flimsy sheet metal it is bolted to, possibly causing expensive and unsightly damage. The Inner Brace Set that comes with Poison Spyder Crusher Flares effectively bypasses the outer sheet metal, instead transferring those forces to the much stronger inner structure of the Jeep. That is why weve been able to demonstrate the strength of our flare attachment system by parking aNother Jeep on top of the Crusher Flare! These Inner Braces are CNC laser cut, brake-formed for a great fit and simple installation.
Rubber Liners Included
JK Front Crusher Flares come with high quality rubber liners to place between the Crusher Flare and the Jeep body sheet metal during installation. The rubber liners provide help protect your Jeep exterior paint, where the flare contacts it. It also helps even out the contact area of the Crusher Flare, absorbing any small bumps or imperfections between the mated surfaces. The rubber liner also helps keep moisture, dirt and debris from collecting between the Crusher Flare and the Jeep body. These liners are cut from premium EPDM rubber.
Retain Factory Wheel Wells
When installing Poison Spyder JK Front Crusher Flares you have the option of retaining the factory wheel well liner to protect the engine from trail and road debris. Retaining the wheel well also helps to conceal the Inner Braces to complete a clean and finished appearance. Some trimming of the plastic wheel well is required, but the kit comes with hardware and mounting brackets to re-install the trimmed wheel well.
Provisions for LED Marker Lamps
The JK Front Crusher Flare kit comes Standard with mounting provisions to replace the factory side marker with a high intensity 3/4 inch round LED marker light. The addition of the LED provides a more modern and refined look that complements the function and style of the Crusher Flare.
Steel or Aluminum?
Not sure whether to choose steel or aluminum for your Crusher Flares? Aluminum is lighter in weight, so might be the best choice for those looking to save weight on their heavy JKs in order to improve fuel mileage and gain an advantage off-road. However, when wheeling with aluminum flares it is up to the driver to use more care and finesse, as the aluminum components are Not going to be able to withstand the same direct impacts that steel can. The outer tube on our aluminum Crusher Flares is beefy .188 wall thickness. Compared to our steel Crusher Flares which use .120 wall DOM steel tubing. The thicker tube wall recoups some of the strength lost by going to aluminum, however the steel versions will still be stronger in a direct impact with the rocks. For reference, a steel JK Front Crusher Flare weighs 31.6 lbs (Not including hardware), while an aluminum one weighs only 11.8 lbs. Which is best for you will depend on your particular intended use of the Jeep, driving style and other factors.

JK Rear Crusher Flares Standard Width (Aluminum) for Jeep Wrangler JK 2007-2016. Poison Spyders Crusher Flares add hard core durability and great looks to your Jeep JK. Like in the front, the original equipment rear flares are flimsy plastic which can tear off and are easily damaged on the trail. Poison Spyders Rear Crusher Flares for JK are all-steel, precision-fabricated replacements that are built to handle extreme terrain. This product ships as bare steel it will need to be painted or powdercoated prior to final installation.

Features:

• Replace flimsy plastic OE fender flares with rugged 6061-T6 aluminum alloy
• Standard Width mimics approximate width of Stock fender flares
• CNC laser cut 3/16 inch mounting plate and 1/8 inch top plate
• NC bent 1.5 inch OD X .188 wall DOM Aluminum tube outer rub rail
• Internal bracing kit transfers impact loads to Jeep heavy gauge inner tub structure
• Bare Finish
• Sold As A Pair

The Poison Spyder JK Crusher Flare provides tire coverage for up to a 40 inch tire (minor trimming of the inner sheet metal may be required for tire clearance). The Crusher Flares mounting plate is made of CNC laser cut 3/16 inch plate aluminum that has been brake-formed to fit the contours of the JKs flare mounting surface like a glove. The Crusher Flare rails are CNC-bent 1.5 inch X .188 wall DOM structural tubing, with a fender surface made of 1/8 inch laser-cut plate aluminum. The Crusher Flare mounts using stainless steel countersunk flat head cap screws that provide a low profile, great looks and corrosion resistance.

Installation requires drilling and installation of the provided nut-sert fasteners. Poison Spyder supplies a simple nut-sert installation tool to facilitate the process. Crusher Flares are sold as bare aluminum. For added structural rigidity when hardcore wheeling, Rear Crusher Flares come with a 4-piece Inner Brace Kit.

The Inner Braces are engineered to provide the internal structure to keep the Crusher Flares from deforming the Jeep outer tub sheet metal on impacts. The components are laser-cut and brake-formed to precisely fit between the Jeep outer sheet metal and the heavier gauge steel of the structural inner tub. The result is a Crusher Flare installation that will withstand serious hits from the rocks.
The JK Rear Crusher Flare Kit comes Standard with mounting provisions to place a small 3/4 inch LED marker lamp inside the flare just rearward of the tire. The LED can be wired in to the Jeep running lights or turn signal circuits. 3/4 inch amber LED lamps are available separately from Poison Spyder.