2007-2018 4WD Jeep Wrangler JK; 2-door models ONLY
FRONT: Lifted coil springs, Upper adjustable control arms, Lower adjustable control arms, Sway-bar quick disconnects, Forged adjustable track bar, Stainless steel braided brake lines, Shock relocation brackets, Hardware; REAR: Lifted coil springs, Upper adjustable control arms, Lower adjustable control arms, Coil correction plates, Track bar drop bracket, Extended sway-bar links, Stainless steel braided brake lines, Hardware; SHOCKS: (4) Premium N3 Series
Does NOT fit 4-door (Unlimited) models.; 2012-up models require exhaust modifications to clear the front driveshaft. (#1030); On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.