2007,2017,Jeep,Wrangler,|2007,2016,Jeep,Wrangler,Rubicon|2007,2016,Jeep,Wrangler,Sahara|2007,2010,Jeep,Wrangler,X|2010,2016,Jeep,Wrangler,Sport|2011,2011,Jeep,Wrangler,70th Anniversary|2016,2016,Jeep,Wrangler,75th Anniversary|2016,2016,Jeep,Wrangler,Sport S|2018,2018,Jeep,Wrangler JK,
-5%
Axle Truss
Rock Krawler JK 6 Inch Offset Spring Mounts RK05022
Our JK 6 inch off-set coil spring mounts are welded to the rear axle and used to compensate for a 6 inch rear stretch, eliminating rear coil spring misalignment.
Includes:
2 Off-set spring mounts
$111.15 $117.00
Related products
-
Axle Truss
Rough Coutry Jeep Spare Tire Relocation Bracket (2018 Wrangler JL) 10526
Gain enough clearance to run a 35×12.50 spare tire with Rough Country?ÇÖs Jeep JL Spare Tire Carrier Relocation Bracket! In the factory position, the Jeep JL is unable to mount a 35in spare tire due to inadequate clearance over the factory bumper. This durable, easy-to-install mount relocates the factory spare tire assembly upwards by 4.75in, allowing you to easily clear a 35in aftermarket spare tire above your factory rear bumper.Rough Country?ÇÖs JL Spare Tire Carrier Relocation Bracket succeeds where simpler solutions fail; engineered as a solid-steel, one-piece plate for the ultimate in durability and strength when it comes to holding the weight of your spare tire and wheel. This innovative design bolts directly into the factory mounting points and includes all the necessary components to relocate your entire spare tire assembly upwards with no need for drilling, welding, or additional modifications. Includes Rough Country?ÇÖs Lifetime Replacement Guarantee!
SKU: 10526 -
Axle Truss
Dana 44 Rear Truss Upper Link Mount 07-Pres Wrangler JK Rubicon 2/4 Door G2 Axle and Gear 68-2052-2
Axle TrussDana 44 Rear Truss Upper Link Mount 07-Pres Wrangler JK Rubicon 2/4 Door G2 Axle and Gear 68-2052-2
The all new G2 Heavy Duty JK Rear Dana 44 upper link mounts are designed to be used with the G2 rear axle truss and armor system to give your JK the strength it needs to take serious abuse. Constructed from 1/4in. thick main components and 1/8in. thick reinforcement plates, all components are laser cut to precise specifications to ensure a perfect fit for easy installation. Welding is required. Professional welding skills are strongly recommended.
Details:- Fits 2007 to 2016 JK Rubicon Dana 44 rear axle
- Upper link mount for 68-2052-1
- 2 and 4-door models
- Heavy-duty steel construction
- Unpainted
- Welding required
SKU: 68-2052-2 -
Axle Truss
Dana 44 Rear Axle Truss No Steering Ram Mount 07-Pres Wrangler JK Rubicon 2/4 Door G2 Axle and Gear 68-2052-1
Axle TrussDana 44 Rear Axle Truss No Steering Ram Mount 07-Pres Wrangler JK Rubicon 2/4 Door G2 Axle and Gear 68-2052-1
The all new G2 Heavy Duty JK Rear Dana 44 axle truss and armor system gives your JK the strength it needs to take serious abuse. Constructed from 1/4in. thick main components and 1/8 Inch thick reinforcement plates, this truss design provides critical strengthening in a lightweight package across the whole axle, not just the long tube. All components are laser cut to precise specifications to ensure a perfect fit for easy installation. Welding is required, including to the cast center section. Professional welding skills are strongly recommended. The G2 heavy duty JK Rubicon Rear Dana 44 axle truss is intended for use on JKs with at least some lift. For vehicles with minimal or no lift, please check clearances before installation. This system is designed for US-Spec vehicles.
Details:- Fits 2007 to 2016 JK Rubicon Dana 44 rear axle
- 2 and 4-door models
- Heavy-duty steel construction
- Unpainted
- Welding required
- Upper link mount sold separately part# G/268-2052-2
SKU: 68-2052-1 -
Axle Truss
Dana 30 Front Axle Truss W/Gusset, Truss, Bracket 07-Pres Wrangler JK G2 Axle and Gear 68-2050
Axle TrussDana 30 Front Axle Truss W/Gusset, Truss, Bracket 07-Pres Wrangler JK G2 Axle and Gear 68-2050
The all new G2 Heavy Duty JK Front Dana 30 axle truss and armor system gives your JK the strength it needs to take serious abuse. Constructed from 1/4in. thick main components and 1/8in. thick reinforcement plates, this truss design provides critical strengthening in a lightweight package across the whole axle, not just the long tube. All components are laser cut to precise specifications to ensure a perfect fit for easy installation. Welding is required, including to the cast center section. Professional welding skills are strongly recommended. The G2 heavy duty JK Rubicon Front Dana 44 axle truss and armor system includes Lower Control Arm Skids, Inner C Gussets, Reinforced Stock Height Track Bar Bracket, and main Axle Truss Assembly.
Details:- Fits 2007 to 2016 JK Dana 30 front axle
- 2 and 4-door models
- Heavy-duty steel construction
- Unpainted
- Welding required
- Includes gusset, truss and bracket
- Without Steering Ram Mount
SKU: 68-2050
