ProLink E Expert Shackle Mount Assembly Red Factor 55
ProLink Expert. Replace conventional winch hooks with a safer more secure shackle/D-ring. Lightweight, Precision CNC machined 6000 series aluminum. No splicing required, titanium double shear pin design.
Designed for both steel cables and synthetic winch ropes. Integrated EPDM rubber boot for fairlead protection. Connects to either the pin or bow end of common 3/4 inch screw pin shackles. Connects to the pin ends of 7/8 inch and 1 inch screw pin shackles. Fits over most OEM tow hooks.
Warning: Keep forces in line. Do not side load shackle
Features:
- Color: Red
- For rope and cable diameters up to 3/8 inch
- Fits common 3/4 inch screw pin shackles/D-rings
- Mil-Spec anodized or powder coated
- 5/8 inch diameter 6AI-4V titanium double shear pin
- Max Load: 16,000 pounds
- Ultimate Strength: 40,000 pounds
- Weight: 30oz
$189.95 $199.95
Related products
-
Winch Shackle
ProLink XXL Shackle Mount Assembly Black Factor 55
The Factor 55 ProLink XXL is the largest and strongest ProLink winch shackle mount in production. The ProLink XXL provides winch owners with a means to replace the conventional winch hook with a safer and stronger screw pin shackle/D-ring. Originally designed for military 24,000 pound winch applications, the ProLink XXL is now available to the general public.
Like all models in the ProLink family, the XXL is engineered and made in the USA from 6000 series billet aluminum and is equipped with a 6Al-4V titanium double shear pin. In this case the shear pin diameter is .750 inches. The base of the XXL is protected by the barbed high durometer EPDM rubber guard. With a working load limit of 24,000 pounds and an ultimate failure of over 63,000 pounds, the Prolink XXL is definitely up to the task.
The XXL is compatible with steel cables and synthetic ropes up to 1/2 inch in diameter. The XXL is also compatible with common 3/4 inch shackles as well as larger 7/8 inch shackles. Like other ProLink products, the XXL is available in 5 anodized/powder coated colors – black, silver, gray, red, and blue.
Features:- Color: Black
- MADE IN USA
- 6000 series billet Kaiser Aluminum
- .750 inch diameter Titanium double shear pin
- 5 inches tall and 4 inches in diameter.
- Working Load Limit of 24,000 pounds
- Ultimate failure of greater than 63,000 pounds
- Fits all steel cables and synthetic ropes up to 1/2 inch diameter
- EPDM Rubber Guard protects alloy Hawse fairleads
- Simple snap ring shear pin retainment
SKU: 00210-04-GGBW -
Winch Shackle
ProLink Winch Shackle Mount Assembly Silver Factor 55
Replace conventional winch hooks with the new safer, stronger, and smarter Factor 55 ProLink shackle mount. Factor 55 introduces the new ProLink shackle mount for winch cables and synthetic ropes. Engineered and machined in the USA from lightweight billet 6061 aluminum, the ProLink provides a safe means to easily attach a standard 3/4 inch screw pin shackle to existing winch cable and rope eyes
The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8 inch double shear pin. The front of the ProLink provides the precision shackle mounting hole and massive 1.2 inch thick mounting tab.
The ProLink is compatible with both Hawse and Roller fairleads and snugs neatly against both versions.
Product Specifications:- Color: Silver
- Screw pin shackles are up to 5X stronger than conventional winch hooks
- Conventional hooks are too small to safely fit both ends of a recovery strap
- Recover straps cannot slip out of a shackle like they can with hooks
- Hook safety latches are not rated for loads and can tear recovery straps
- Conventional hook surfaces add higher stresses to recovery strap fibers, resulting in decreased strap ratings
- Shackles can be quickly removed and stowed away until needed for winching.
- Hooks do not cinch neatly against fairleads and are prone to rattling and loosening
- Conventional winch hooks are designed for chains – not commonly used recovery straps
- Engineered, Tested, and Made in USA — Patent Pending
- Stress analyzed using COSMOS FEA and destructively tested for confirmation
- Billet construction — precision machined from 6061-T6 Kaiser Aluminum round bar
- 16,000 pound max load rating
- Fits all steel cables and synthetic ropes up to 3/8 inch in diameter
- Fits eyes equipped with standard or tube thimbles to 3/8 inch diameters
- 1.2 inch shackle tab thickness virtually eliminates shackle rattle
- 5/8 inch diameter 6Al-4V titanium double shear pin
- Optional EPDM Rubber Guard protects alloy Hawse fairleads — rubber barb attachment
- Can be installed and removed in minutes — simple snap ring removal
- Cinches neatly against all types of fairleads — Hawse or Roller
- Beautifully anodized and zinc plated in the USA
SKU: 00015-05-GGBW -
Winch Shackle
HitchLink 2.5 Reciever Shackle Mount 2.5 Inch Receivers Anodized Gray Factor 55
For Class V hitch receivers. Our truck owners asked and we listened. No need to Sleeve Class V hitch receivers to weaker Class III and Class IV. Finally a hitch receiver shackle mount designed for Class V receivers. Only available in Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
The HitchLink 2.5 will accept both 3/4 and 7/8 shackles. It can be oriented inside the hitch receiver allowing the shackle tab to be parallel to the bumper or vertical depending on its desired need. It also eliminates the need to use a receiver sleeve to downsize your receiver to a 2 inch adapter. Rated at 18,000 lbs. Ultimate Failure at 69,000 lbs. Use your receiver as a recovery tow point.
Features:- Color: Hard Anodized Gray
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 3.6 lbs pounds
- Rated at 18000 pounds
- Ultimate failure at 69,000 pounds
- Fits standard Class V 2.5 inch receivers
- Fits common 7/8 inch pin) and 7/8 inch (1 inch pin) screw pin shackles/D-rings
- Available in the Military Specification Anodizing (Mil-A-8625 F Type III) Gray
- Cross drilled hitch pin attachment (vertical or horizontal shackle pin axis)
- Made in USA
Warning:
- Never exceed factory receiver hitch pull rating
- Always use a quality steel alloy 5/8 inch hitch pin
- Always pull in line with the hitch, do not bind or side load the shackle
SKU: 00022-06-GGBW -
Winch Shackle
ProLink E Expert Shackle Mount Assembly Gray Factor 55
ProLink Expert. Replace conventional winch hooks with a safer more secure shackle/D-ring. Lightweight, Precision CNC machined 6000 series aluminum. No splicing required, titanium double shear pin design.
Designed for both steel cables and synthetic winch ropes. Integrated EPDM rubber boot for fairlead protection. Connects to either the pin or bow end of common 3/4 inch screw pin shackles. Connects to the pin ends of 7/8 inch and 1 inch screw pin shackles. Fits over most OEM tow hooks.
Warning: Keep forces in line. Do not side load shackleFeatures:
- Color: Gray
- For rope and cable diameters up to 3/8 inch
- Fits common 3/4 inch screw pin shackles/D-rings
- Mil-Spec anodized or powder coated
- 5/8 inch diameter 6AI-4V titanium double shear pin
- Max Load: 16,000 pounds
- Ultimate Strength: 40,000 pounds
- Weight: 30oz
SKU: 00310-06-GGBW -
Winch Shackle
UltraHook Winch Hook W/Shackle Mount Gray Factor 55
The world’s safest winch hook. Featuring Industry first Closed System Shackle Mount hole machined into the body of the hook, safety latch retraction pocket resulting in a clear throat opening, integrated secondary safety latch locking feature-latch locking pin stored in the body of the UltraHook which can be removed and inserted in to the hook tip, locking the latch into place.
EPDM rubber pads for fairlead protection, titanium double shear pin, and a finger grip feature that promotes proper Hook Up orientation. The first winch hook that can be stored against your fairlead protecting either your hawse or roller style fairlead from a metal to metal connection.
Features:- Color: Gray
- The industry’s first winch hook with an integrated shackle pin mount
- Two methods of use: conventional hook opening, or shackle mount
- Shackle pin mount allows the safer practice of Closed System Winching
- Finger grip feature promotes proper Hook Up orientation
- Double locking safety clasp – lock the safety clasp with the included clevis pin
- Latch lock clevis pin stored conveniently in hook body
- Integrated EPDM rubber pads for fairlead surface protection
- Max opening deformation clearly laser engraved
- Lightweight – Precision CNC machined 7000 series Military Grade Aluminum
- No rope splicing required – double shear pin design accepts rope/cable eyes
- Designed for both steel cables and synthetic winch ropes
- Foldable to stow rattle free against fairleads
- Shackle pin mounting hole accepts 3/4 shackle pins (.875 inch diameter)
- For rope and cable diameters up to 3/8 inch
- Available in the Military Specification Hard Anodizing (Mil-A-8625 F Type III) Gray
- 5/8 inch diameter 6AI-4V grade V titanium double shear pin
- Max Rated Load: 16,000 pounds
- Ultimate Strength – Hook Throat Opening: 31,000 pounds
- Ultimate Strength – Shackle Pin Mount: 48,000 pounds
- Weight: 32oz
- Made in USA
SKU: 00250-06-GGBW
