HitchLink 2.0 Reciever Shackle Mount 2 Inch Receivers Silver Factor 55
Hitchlink 2.0 Reciever Shacle Mount. Use your receiver as a recovery tow point.
Features:
- Color: Silver
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 1.9 pounds. Steel versions weigh up to 8 pounds
- Rated at 9500 pounds
- Ultimate failure at 51,000 pounds
- Fits standard 2 inch receivers
- Fits common 3/4 screw pin shackles/D-Rings
- Anodized or powder coated for oxidation protection
- Made in USA
Warning:
- Never exceed factory receiver hitch pull rating
- Always use a quality steel alloy 5/8 inch hitch pin
- Always pull in line with the hitch, do not bind or side load the shackle
$75.95 $79.95
Related products
-
Winch Shackle
HitchLink 2.0 Reciever Shackle Mount 2 Inch Receivers Black Factor 55
0 out of 5(0)Hitchlink 2.0 Reciever Shacle Mount. Use your receiver as a recovery tow point.
Features:- Color: Black
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 1.9 pounds. Steel versions weigh up to 8 pounds
- Rated at 9500 pounds
- Ultimate failure at 51,000 pounds
- Fits standard 2 inch receivers
- Fits common 3/4 screw pin shackles/D-Rings
- Anodized or powder coated for oxidation protection
- Made in USA
Warning:
- Never exceed factory receiver hitch pull rating
- Always use a quality steel alloy 5/8 inch hitch pin
- Always pull in line with the hitch, do not bind or side load the shackle
SKU: 00020-04-GGBW$75.95$79.95 -
Winch Shackle
UltraHook Winch Hook W/Shackle Mount Red Factor 55
0 out of 5(0)The world’s safest winch hook. Featuring Industry first Closed System Shackle Mount hole machined into the body of the hook, safety latch retraction pocket resulting in a clear throat opening, integrated secondary safety latch locking feature-latch locking pin stored in the body of the UltraHook which can be removed and inserted in to the hook tip, locking the latch into place.
EPDM rubber pads for fairlead protection, titanium double shear pin, and a finger grip feature that promotes proper Hook Up orientation. The first winch hook that can be stored against your fairlead protecting either your hawse or roller style fairlead from a metal to metal connection.
Features:- Color: Red
- The industry’s first winch hook with an integrated shackle pin mount
- Two methods of use: conventional hook opening, or shackle mount
- Shackle pin mount allows the safer practice of Closed System Winching
- Finger grip feature promotes proper Hook Up orientation
- Double locking safety clasp – lock the safety clasp with the included clevis pin
- Latch lock clevis pin stored conveniently in hook body
- Integrated EPDM rubber pads for fairlead surface protection
- Max opening deformation clearly laser engraved
- Lightweight – Precision CNC machined 7000 series Military Grade Aluminum
- No rope splicing required – double shear pin design accepts rope/cable eyes
- Designed for both steel cables and synthetic winch ropes
- Foldable to stow rattle free against fairleads
- Shackle pin mounting hole accepts 3/4 shackle pins (.875 inch diameter)
- For rope and cable diameters up to 3/8 inch
- Available in the Military Specification Hard Anodizing (Mil-A-8625 F Type III) Gray
- 5/8 inch diameter 6AI-4V grade V titanium double shear pin
- Max Rated Load: 16,000 pounds
- Ultimate Strength – Hook Throat Opening: 31,000 pounds
- Ultimate Strength – Shackle Pin Mount: 48,000 pounds
- Weight: 32oz
- Made in USA
SKU: 00250-01-GGBW$237.45$249.95 -
Winch Shackle
HitchLink 2.0 Reciever Shackle Mount 2 Inch Receivers Red Factor 55
0 out of 5(0)Hitchlink 2.0 Reciever Shacle Mount. Use your receiver as a recovery tow point.
Features:- Color: Red
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 1.9 pounds. Steel versions weigh up to 8 pounds
- Rated at 9500 pounds
- Ultimate failure at 51,000 pounds
- Fits standard 2 inch receivers
- Fits common 3/4 screw pin shackles/D-Rings
- Anodized or powder coated for oxidation protection
- Made in USA
Warning:
- Never exceed factory receiver hitch pull rating
- Always use a quality steel alloy 5/8 inch hitch pin
- Always pull in line with the hitch, do not bind or side load the shackle
SKU: 00020-01-GGBW$75.95$79.95 -
Winch Shackle
ProLink Winch Shackle Mount Assembly Silver Factor 55
0 out of 5(0)Replace conventional winch hooks with the new safer, stronger, and smarter Factor 55 ProLink shackle mount. Factor 55 introduces the new ProLink shackle mount for winch cables and synthetic ropes. Engineered and machined in the USA from lightweight billet 6061 aluminum, the ProLink provides a safe means to easily attach a standard 3/4 inch screw pin shackle to existing winch cable and rope eyes
The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8 inch double shear pin. The front of the ProLink provides the precision shackle mounting hole and massive 1.2 inch thick mounting tab.
The ProLink is compatible with both Hawse and Roller fairleads and snugs neatly against both versions.
Product Specifications:- Color: Silver
- Screw pin shackles are up to 5X stronger than conventional winch hooks
- Conventional hooks are too small to safely fit both ends of a recovery strap
- Recover straps cannot slip out of a shackle like they can with hooks
- Hook safety latches are not rated for loads and can tear recovery straps
- Conventional hook surfaces add higher stresses to recovery strap fibers, resulting in decreased strap ratings
- Shackles can be quickly removed and stowed away until needed for winching.
- Hooks do not cinch neatly against fairleads and are prone to rattling and loosening
- Conventional winch hooks are designed for chains – not commonly used recovery straps
- Engineered, Tested, and Made in USA — Patent Pending
- Stress analyzed using COSMOS FEA and destructively tested for confirmation
- Billet construction — precision machined from 6061-T6 Kaiser Aluminum round bar
- 16,000 pound max load rating
- Fits all steel cables and synthetic ropes up to 3/8 inch in diameter
- Fits eyes equipped with standard or tube thimbles to 3/8 inch diameters
- 1.2 inch shackle tab thickness virtually eliminates shackle rattle
- 5/8 inch diameter 6Al-4V titanium double shear pin
- Optional EPDM Rubber Guard protects alloy Hawse fairleads — rubber barb attachment
- Can be installed and removed in minutes — simple snap ring removal
- Cinches neatly against all types of fairleads — Hawse or Roller
- Beautifully anodized and zinc plated in the USA
SKU: 00015-05-GGBW$142.44$149.94 -
Winch Shackle
FlatLink Winch Shackle Mount Assembly Black Factor 55
0 out of 5(0)Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.
Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment.
The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips.
The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. The FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.
Features:- Color: Black
- Precision machined from 6000 series aluminum
- Compatible with all roller fairlead license plate mounting brackets
- When folded flat – less than 1.75 inches of thickness
- Weight – 23 ounces
- Max load rating : 16,000 pounds
- Ultimate failure : greater than 40,000 pounds
- Fits steel cables and synthetic winch ropes to 3/8 inch diameters
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage.
- Simple snap ring removal for shear pin.
- Fits common 3/4 shackles/D-Rings
- Eliminates hook rattle and fairlead damage
- Made In USA
SKU: 00050-04-GGBW$132.94$139.94