D Ring Shackle
Showing all 22 results
-
D Ring Shackle, JEEP WINCHES & RECOVERY
When running the Hammers flat out or just letting loose with friends, and you want to keep your gear in the rig, then look to Smittybilt to provide you with a cargo restraint system. This newly designed CRES is manufactured out of Military Grade PVC Material takes durable to the extreme and is 10 times stronger than traditional soft top material.
Each CRES Net is designed to mount into the factory belt rail channel and strap around the roll bar for a perfect fit. With a rear zippered curtain, you are not limited to the size cargo you can carry. This system is available in Matte Black Finish and is custom fit for Jeep Wrangler.
Details:- Fits 1997 to 2006 TJ Wrangler
- Manufactured from military grade PVC material
- UV stable
- Custom fit install – no drilling
- Limited lifetime warranty
- Works with the standard brief top
SKU: 2747-SMB -
D Ring Shackle
3/4 Recovery Shackle Poison Spyder – 56-16-010
Poison Spyder 3/4 Recovery Shackle. These heavy duty 3/4 inch Recovery Shackles are rated at a working load limit of 4.75 tons. Made of high quality steel and yellow zinc plated for corrosion resistance.
The heavy duty D-ring and massive 7/8 inch threaded pin make a quick job of safely rigging recovery straps and winch cables. No 4X4 should be on the trail without a couple of these in the on board recovery kit. Sold by the piece.SKU: 56-16-010-PSC -
-
D Ring Shackle
D-Ring 1/2 Inch 2 Ton Rating Black Smittybilt – 13046B
Smittybilts fender flares are produced for you in a textured UV stable ABS plastic. This ABS plastic is strong enough for the trail and looks good enough for the city streets. Its durable construction allows it to be flexible without cracking. Bolt it on or paint it first to match your Jeeps paint job. Minimal drilling may be needed for proper installation.
Details:- Fits 1987 to 1995 YJ Wrangler
- Black textured UV stable ABS Plastic
- 4 piece set
- Provides 6 Inch of coverage
- Requires drilling
SKU: n/a -
D Ring Shackle
D-Ring 3/4 Inch 4.75 Ton Rating Black Smittybilt – 13047B
Give your tube bumper that finished look with this rear frame cover. Finished in textured black, it compliments any rear tube bumper.
Details:- Fits 2007 to 2018 Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Textured black
- Fills gap between bumper and frame when using a tubular bumper
SKU: n/a -
D Ring Shackle
D-Ring 3/4 Inch 4.75 Ton Rating Red Powdercoat Smittybilt – 13047R
The Smittybilt D-Rings are zinc-coated cast steel construction or are powdercoat finished in black or red. Our D-Rings feature a 3/4-inch pin for heavy duty use, and have a weight rating of 4.75 tons! The Smittybilt D-Rings are a perfect match for all Smittybilt bumpers with D-Ring mounts. Look to Smittybilt D-Rings to help guide you out of any situation.
- D-Ring
- 3/4 inch shackle
- 4.75 ton rating
- Heavy duty, forged steel construction
- Corrosion resistant
- Easy, no-drill installation
- Gloss Red Powdercoat Finish
- Also available in zinc or gloss black
- Sold As Each
SKU: n/a -
D Ring Shackle
D-Ring 3/4 Inch 4.75 Ton Rating Zinc Smittybilt – 13047
Give your tube bumper that finished look with this rear frame cover. Finished in textured black, it compliments any rear tube bumper.
Details:- Fits 2007 to 2018 Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Textured black
- Fills gap between bumper and frame when using a tubular bumper
SKU: n/a -
D Ring Shackle
D-Ring 3/4 Locking Pin 4.75 Tons (Black) Smittybilt – 13049B
Smittybilts fender flares are produced for you in a textured UV stable ABS plastic. This ABS plastic is strong enough for the trail and looks good enough for the city streets. Its durable construction allows it to be flexible without cracking. Bolt it on or paint it first to match your Jeeps paint job. Minimal drilling may be needed for proper installation.
Details:- Fits 1997-2006 Wrangler TJ/LJ
- Black textured UV stable ABS Plastic
- 4 piece set
- Provides 6 Inch of coverage
- Requires drilling
SKU: n/a -
D Ring Shackle
D-Ring 3/4 Locking Pin 4.75 Tons (Zink) Smittybilt – 13049
The new XRC flux flares are double-articulated tube fenders that provide extra outer tire clearance for larger tires under full suspension articulation.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Front flares with turn signals
- CNC-bent 1.5 Inch diameter tubes covered with 1/8 Inch laser cut cold rolled sheet metal
- 6 Inch wide double articulation tube fenders, providing extra 3 Inch of suspension travel
- Provides extra outer tire clearance for larger tires under full suspension articulation
- 3/4 Inch LED turn signal lights included
- Minimal modification for installation
- Bolts to OE mounting points
- Spacers and brackets included for extra strength
- Preserves factory inner liner
- Sold as a pair
SKU: n/a -
D Ring Shackle
D-Ring 7/8 Inch 6.5 Ton Rating Black Smittybilt – 13048B
The ultimate in Comfort and Style! Plush vinyl or full fabric covering and contoured bucket seats assure total comfort. Unlimited recline positions and adjustable headrest keeps you alert, yet comfortable. Mounts to your factory seat slider and bracket. Available with leather grain vinyl or fabric seating surfaces. Seat adapters are required for installation in 1997-02 TJ Wranglers.
Details:- Fits 1976 to 2018 Wrangler and CJ
- Gray Denim
- Contoured bucket seat
- Unlimited recline positions with adjustable headrest
- 1997 and newer models require adapter brackets
- Hardware not included
SKU: n/a -
D Ring Shackle
D-Ring 7/8 Inch 6.5 Ton Rating Zinc Smittybilt – 13048
The ultimate in Comfort and Style! Plush vinyl or full fabric covering and contoured bucket seats assure total comfort. Unlimited recline positions and adjustable headrest keeps you alert, yet comfortable. Mounts to your factory seat slider and bracket. Available with leather grain vinyl or fabric seating surfaces. Seat adapters are required for installation in 1997-02 TJ Wranglers.
Details:- Fits 1976 to 2018 Wrangler and CJ
- Spice Denim
- Contoured bucket seat
- Unlimited recline positions with adjustable headrest
- 1997 and newer models require adapter brackets
- Hardware not included
SKU: n/a -
D Ring Shackle
D-Ring 7/8 Locking Pin 6.5 Tons (Black)Smittybilt – 13050B
Designed for early-model CJ vehicles. Rugged contoured seat with firm comfortable spring suspension. Installation is quick and easy using the same mounting hardware and bolts from the original seats.
Details:- Fits 1955 to 1976 CJ
- Traditional black vinyl
- Rugged contoured seat with firm comfortable spring suspension
- Uses same mounting hardware and bolts from original seats
- Passenger side seat bracket will need modified on 1955-75 CJ Foots
SKU: n/a -
D Ring Shackle
D-Ring 7/8 Locking Pin 6.5 Tons (Zink) Smittybilt – 13050
The ultimate in Comfort and Style! Plush vinyl or full fabric covering and contoured bucket seats assure total comfort. Unlimited recline positions and adjustable headrest keeps you alert, yet comfortable. Mounts to your factory seat slider and bracket. Available with leather grain vinyl or fabric seating surfaces. Seat adapters are required for installation in 1997-02 TJ Wranglers.
Details:- Fits 1976 to 2018 Wrangler and CJ
- Black Denim
- Contoured bucket seat
- Unlimited recline positions with adjustable headrest
- 1997 and newer models require adapter brackets
- Hardware not included
SKU: n/a -
D Ring Shackle
D-Ring Shackle Tab Poison Spyder – 45-42-010
The Poison Spyder D-Ring Shackle Tab allows fabricators to easily add a super-tough recovery attachment point to any structural member of the vehicle. CNC machined from 1 inch thick plate steel, these Shackle Tabs feature chambered edges for maximum weld penetration and a quality, finished appearance.
The tab is specifically designed to accept a 3/4 inch D-ring shackle. Sold by the piece.
Features:- CNC machined from 1 inch thick billet steel
- Provides an extreme duty attachment point for 3/4 inch screw-pin type shackles
- Angled design for the best clearance from rocks when welded to front or rear bumpers
- To be installed by certified welders only
SKU: 45-42-010-PSC -
D Ring Shackle
JK D-Ring Mount Kit 07-Pres Wrangler JK TeraFlex
%3Cp%3EThe+TeraFlex+bolt+on+D-Ring+mount+kit+is+designed+as+a+universal+recovery+point%2C+it+does+require+some+drilling+for+the+mounting+holes.+It+bolts+directly+to+the+front+JK+frame.+Two+required+per+vehicle.%3Cbr+%2F%3E%3Cstrong%3EFits%3A%3C%2Fstrong%3E%3C%2Fp%3E%0A%3Cul%3E%0A%3Cli%3E07-Present+Jeep+Wrangler+JK%3C%2Fli%3E%0A%3Cli%3E07-Present+Jeep+Wrangler+Unlimited+JK%3C%2Fli%3E%0A%3C%2Ful%3E%0A%3Cp%3E%3Cstrong%3EDetails%3A%3C%2Fstrong%3E%3C%2Fp%3E%0A%3Cul%3E%0A%3Cli%3ESolid+Steel%3C%2Fli%3E%0A%3Cli%3EBlack+Bowdercoat+Finish%3C%2Fli%3E%0A%3Cli%3ED-Ring+Shackles+Sold+Separately%3C%2Fli%3E%0A%3Cli%3ESold+Individually%3C%2Fli%3E%0A%3C%2Ful%3E%0A
SKU: 4803300-FNNT -
D Ring Shackle
Receiver Hitch D-Ring 3/4 Inch 4.75 Ton Rating Fits 2 Inch Receiver Black Smittybilt – 29312B
D Ring ShackleReceiver Hitch D-Ring 3/4 Inch 4.75 Ton Rating Fits 2 Inch Receiver Black Smittybilt – 29312B
Molded handle that can be mounted to any 2-3 Sport Bar, soft wrap outer for a tight fit and great looks. Hook and Loop attaching straps. Black only. Sold as a pair.
Details:- Use with 2-3 sport bar
- Soft wrap outer for a tight fit and great look
- Sold as a pair
SKU: n/a -
D Ring Shackle
Receiver Hitch D-Ring 3/4 Inch 4.75 Ton Rating Fits 2 Inch Receiver Zinc Smittybilt – 29312
D Ring ShackleReceiver Hitch D-Ring 3/4 Inch 4.75 Ton Rating Fits 2 Inch Receiver Zinc Smittybilt – 29312
Molded handle that can be mounted to any 2-3 Inch Sport Bar, soft wrap outer for a tight fit and great looks. Hook and Loop attaching straps. Black only. Sold as a pair.
Details:- Universal
- Black
- Fit any 2-3 Inch padded sport bar
- Molded rubber grip handle
- 3 heavy-duty hook and loop adjustable vinyl straps
- Sold as a pair
SKU: n/a -
-
D Ring Shackle
Soft Shackle Rope 7/16 Inch X 6 Inch Smittybilt – 13051-B
Smittybilt is now offering one of the quietest feature rich tops on the market. Each top starts off with one of the thickest gel coats available then hand laid using only the finest materials. Each top is lined with a military spec mildew free carpet liner which delivers one of the quietest rides available. OE Style latches and rear mounting hardware makes this top an easy install ?Çö no drilling or modifications to your vehicle. When youre looking for the quietest and highest quality top ever produced looked to Smittybilt to have you covered up!
Details:- Fits 1997 to 2006 TJ Wrangler and Rubicon
- Color: Black
- Manufactured from honey comb hand-laid fiberglass for extra strength and rigidly
- Contoured DOT approved safety glass – 31 percent Tint
- Thickest UV stable gel coat available
- Textured grain finish complimenting the looks of todays Wranglers
- De-Tuned air vent
- Rack ready mounting system
SKU: n/a -
D Ring Shackle
Splicer 3/8-1/2 Inch Synthetic Rope Splice On Shackle Mount Black Factor 55
The world’s first splice on synthetic rope shackle mounting thimble with rope protection and integrated rubber pad. The unique machined rope passage provides a tough outer barrier to protect against rope impact and abrasion as well as UV exposure protection. Compatible with synthetic ropes up to 1/2 inch in diameter.
Note: Unlike the Factor 55 ProLink and Flatlink shackle mount products, The Splicer requires synthetic rope splicing knowledge. We recommend either the locking Brummel Splice or Long Bury Splice. There are many rope splicing video tutorials available on the web.
Features:- Color: Black
- Replace conventional winch hooks with a safer more secure shackle/D-ring
- The Industry’s first splice on winch rope thimble with impact and UV protection
- Unique machined rope path provides complete rope protection
- Safer recoveries through Closed System Winching
- Lightweight – Precision CNC machined 6000 series Military Grade Aluminum
- For synthetic winch rope only
- Integrated EPDM rubber pad for fairlead protection
- Connects to both the pin and bow end of common 3/4 inch screw pin shackles
- Connects to the pin ends of 7/8 inch and 1 inch screw pin shackles
- For synthetic winch rope diameters up to 1/2 inch
- Available in Military Spec Hard Anodizing (Mil-A-8625 F Type III) and powder coated finishes
- Weight: 25oz
- Made in USA.
SKU: 00352-04-GGBW -
D Ring Shackle
Splicer 3/8-1/2 Inch Synthetic Rope Splice On Shackle Mount Gray Factor 55
The world’s first splice on synthetic rope shackle mounting thimble with rope protection and integrated rubber pad. The unique machined rope passage provides a tough outer barrier to protect against rope impact and abrasion as well as UV exposure protection. Compatible with synthetic ropes up to 1/2 inch in diameter.
Note: Unlike the Factor 55 ProLink and Flatlink shackle mount products, The Splicer requires synthetic rope splicing knowledge. We recommend either the locking Brummel Splice or Long Bury Splice. There are many rope splicing video tutorials available on the web.
Features:- Color: Gray
- Replace conventional winch hooks with a safer more secure shackle/D-ring
- The Industry’s first splice on winch rope thimble with impact and UV protection
- Unique machined rope path provides complete rope protection
- Safer recoveries through Closed System Winching
- Lightweight – Precision CNC machined 6000 series Military Grade Aluminum
- For synthetic winch rope only
- Integrated EPDM rubber pad for fairlead protection
- Connects to both the pin and bow end of common 3/4 inch screw pin shackles
- Connects to the pin ends of 7/8 inch and 1 inch screw pin shackles
- For synthetic winch rope diameters up to 1/2 inch
- Available in Military Spec Hard Anodizing (Mil-A-8625 F Type III) and powder coated finishes
- Weight: 25oz
- Made in USA.
SKU: 00352-06-GGBW -
D Ring Shackle
Splicer 3/8-1/2 Inch Synthetic Rope Splice On Shackle Mount Red Factor 55
The world’s first splice on synthetic rope shackle mounting thimble with rope protection and integrated rubber pad. The unique machined rope passage provides a tough outer barrier to protect against rope impact and abrasion as well as UV exposure protection. Compatible with synthetic ropes up to 1/2 inch in diameter.
Note: Unlike the Factor 55 ProLink and Flatlink shackle mount products, The Splicer requires synthetic rope splicing knowledge. We recommend either the locking Brummel Splice or Long Bury Splice. There are many rope splicing video tutorials available on the web.
Features:- Color: Red
- Replace conventional winch hooks with a safer more secure shackle/D-ring
- The Industry’s first splice on winch rope thimble with impact and UV protection
- Unique machined rope path provides complete rope protection
- Safer recoveries through Closed System Winching
- Lightweight – Precision CNC machined 6000 series Military Grade Aluminum
- For synthetic winch rope only
- Integrated EPDM rubber pad for fairlead protection
- Connects to both the pin and bow end of common 3/4 inch screw pin shackles
- Connects to the pin ends of 7/8 inch and 1 inch screw pin shackles
- For synthetic winch rope diameters up to 1/2 inch
- Available in Military Spec Hard Anodizing (Mil-A-8625 F Type III) and powder coated finishes
- Weight: 25oz
- Made in USA.
SKU: 00352-01-GGBW
