JEEP WINCHES & RECOVERY
Showing 1–32 of 144 results
-
D Ring Shackle, JEEP WINCHES & RECOVERY
When running the Hammers flat out or just letting loose with friends, and you want to keep your gear in the rig, then look to Smittybilt to provide you with a cargo restraint system. This newly designed CRES is manufactured out of Military Grade PVC Material takes durable to the extreme and is 10 times stronger than traditional soft top material.
Each CRES Net is designed to mount into the factory belt rail channel and strap around the roll bar for a perfect fit. With a rear zippered curtain, you are not limited to the size cargo you can carry. This system is available in Matte Black Finish and is custom fit for Jeep Wrangler.
Details:- Fits 1997 to 2006 TJ Wrangler
- Manufactured from military grade PVC material
- UV stable
- Custom fit install – no drilling
- Limited lifetime warranty
- Works with the standard brief top
SKU: 2747-SMB -
D Ring Shackle
3/4 Recovery Shackle Poison Spyder – 56-16-010
Poison Spyder 3/4 Recovery Shackle. These heavy duty 3/4 inch Recovery Shackles are rated at a working load limit of 4.75 tons. Made of high quality steel and yellow zinc plated for corrosion resistance.
The heavy duty D-ring and massive 7/8 inch threaded pin make a quick job of safely rigging recovery straps and winch cables. No 4X4 should be on the trail without a couple of these in the on board recovery kit. Sold by the piece.SKU: 56-16-010-PSC -
Element Ramps
All Element Ramps Mud/ Snow/ Sand Traction Aids Pair Smittybilt – 2790
The Cloak Extended Mesh Top gives you the best of both worlds; reduces the heat and glare of the sun while allowing the cool air to flow through the unique mesh design. Manufactured out of durable long lasting PVC coated mesh material, UV treated material. Easy and quick install no other hardware required.
Details:- Fits 2007 to 2018 JK Wrangler Unlimited and Rubicon Unlimited
- 2-door models
- Black mesh
- Extended Mesh Top only
- Easy install no tools needed
- No header required
- Stays on with hard or soft top installed
- Reduces wind noise
- Installs with heavy-duty bungee cords
- UV and mildew resistant
- Durable long lasting PVC coated mesh material
- Reduces the heat and glare of the sun while allowing cool air to flow through
- Rear and sides sold separately part S/B95501
SKU: n/a -
Winch Fairlead
Aluminum Hawse Fairlead Comp Series Polished W/ XRC Logo Smittybilt – 2805
Smittybilt is proud to introduce their new Cloak Extended Mesh Top, which allows you to enjoy the open air from the shade of your Jeeps passenger compartment. Available for 97-06 Jeep Wrangler TJs and both two door and four door 07-18 Jeep Wrangler JKs, the Cloak is made from durable PVC-coated mesh that is resistant to both ultraviolet rays and mildew. The Smittybilt Cloak installs easily using heavy duty bungee cords with no tools required and fits under standard hard tops or soft tops. Double layer stitching allow the Cloak to shrug off even the largest gusts of wind.
Details:- Black mesh
- Rear and sides only
- Reduces wind noise
- Installs with heavy duty bungee cords
- UV and mildew resistant
- Durable long lasting PVC coat mesh material
- Reduces the heat and glare of the sun while allowing cool air to flow through
- For use with Smittybilt Extended Mesh Top part S/B95500
SKU: n/a -
Winch Fairlead
Aluminum Hawse Fairlead Polished W/ No Logo Smittybilt – 2809
The Cloak Extended Mesh Top gives you the best of both worlds; reduces the heat and glare of the sun while allowing the cool air to flow through the unique mesh design. Manufactured out of durable long lasting PVC coated mesh material, UV treated material. Easy and quick install no other hardware required.
Details:- Fits 2007 to 2018 JK Wrangler Unlimited and Rubicon Unlimited
- 4-door models
- Black mesh
- Extended Mesh Top only
- Easy install no tools needed
- No header required
- Stays on with hard or soft top installed
- Reduces wind noise
- Installs with heavy-duty bungee cords
- UV and mildew resistant
- Durable long lasting PVC coated mesh material
- Reduces the heat and glare of the sun while allowing cool air to flow through
- Rear and sides sold separately part S/B95501
SKU: n/a -
Winch Fairlead
Aluminum Hawse Winch Fairlead Poison Spyder – 45-45-010
The Poison Spyder Aluminum Hawse Fairlead will help protect your synthetic winchline during winch operation, as well as give the front of your 4X4 a little bit of Poison Spyder attitude.
CNC machined from billet aluminum and powdercoated for a durable finish.
Features:- CNC machined from 6061-T6 billet aluminum
- Provides a smooth surface to feed synthetic winch rope through without snags or wear
- Semi-gloss black powdercoat finish
- Poison Spyder logo CNC machined through the powdercoat
- Stainless steel hardware and install instructions included
SKU: 45-45-010-PSC -
-
D Ring Shackle
D-Ring 1/2 Inch 2 Ton Rating Black Smittybilt – 13046B
Smittybilts fender flares are produced for you in a textured UV stable ABS plastic. This ABS plastic is strong enough for the trail and looks good enough for the city streets. Its durable construction allows it to be flexible without cracking. Bolt it on or paint it first to match your Jeeps paint job. Minimal drilling may be needed for proper installation.
Details:- Fits 1987 to 1995 YJ Wrangler
- Black textured UV stable ABS Plastic
- 4 piece set
- Provides 6 Inch of coverage
- Requires drilling
SKU: n/a -
D Ring Shackle
D-Ring 3/4 Inch 4.75 Ton Rating Black Smittybilt – 13047B
Give your tube bumper that finished look with this rear frame cover. Finished in textured black, it compliments any rear tube bumper.
Details:- Fits 2007 to 2018 Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Textured black
- Fills gap between bumper and frame when using a tubular bumper
SKU: n/a -
D Ring Shackle
D-Ring 3/4 Inch 4.75 Ton Rating Red Powdercoat Smittybilt – 13047R
The Smittybilt D-Rings are zinc-coated cast steel construction or are powdercoat finished in black or red. Our D-Rings feature a 3/4-inch pin for heavy duty use, and have a weight rating of 4.75 tons! The Smittybilt D-Rings are a perfect match for all Smittybilt bumpers with D-Ring mounts. Look to Smittybilt D-Rings to help guide you out of any situation.
- D-Ring
- 3/4 inch shackle
- 4.75 ton rating
- Heavy duty, forged steel construction
- Corrosion resistant
- Easy, no-drill installation
- Gloss Red Powdercoat Finish
- Also available in zinc or gloss black
- Sold As Each
SKU: n/a -
D Ring Shackle
D-Ring 3/4 Inch 4.75 Ton Rating Zinc Smittybilt – 13047
Give your tube bumper that finished look with this rear frame cover. Finished in textured black, it compliments any rear tube bumper.
Details:- Fits 2007 to 2018 Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Textured black
- Fills gap between bumper and frame when using a tubular bumper
SKU: n/a -
D Ring Shackle
D-Ring 3/4 Locking Pin 4.75 Tons (Black) Smittybilt – 13049B
Smittybilts fender flares are produced for you in a textured UV stable ABS plastic. This ABS plastic is strong enough for the trail and looks good enough for the city streets. Its durable construction allows it to be flexible without cracking. Bolt it on or paint it first to match your Jeeps paint job. Minimal drilling may be needed for proper installation.
Details:- Fits 1997-2006 Wrangler TJ/LJ
- Black textured UV stable ABS Plastic
- 4 piece set
- Provides 6 Inch of coverage
- Requires drilling
SKU: n/a -
D Ring Shackle
D-Ring 3/4 Locking Pin 4.75 Tons (Zink) Smittybilt – 13049
The new XRC flux flares are double-articulated tube fenders that provide extra outer tire clearance for larger tires under full suspension articulation.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Front flares with turn signals
- CNC-bent 1.5 Inch diameter tubes covered with 1/8 Inch laser cut cold rolled sheet metal
- 6 Inch wide double articulation tube fenders, providing extra 3 Inch of suspension travel
- Provides extra outer tire clearance for larger tires under full suspension articulation
- 3/4 Inch LED turn signal lights included
- Minimal modification for installation
- Bolts to OE mounting points
- Spacers and brackets included for extra strength
- Preserves factory inner liner
- Sold as a pair
SKU: n/a -
D Ring Shackle
D-Ring 7/8 Inch 6.5 Ton Rating Black Smittybilt – 13048B
The ultimate in Comfort and Style! Plush vinyl or full fabric covering and contoured bucket seats assure total comfort. Unlimited recline positions and adjustable headrest keeps you alert, yet comfortable. Mounts to your factory seat slider and bracket. Available with leather grain vinyl or fabric seating surfaces. Seat adapters are required for installation in 1997-02 TJ Wranglers.
Details:- Fits 1976 to 2018 Wrangler and CJ
- Gray Denim
- Contoured bucket seat
- Unlimited recline positions with adjustable headrest
- 1997 and newer models require adapter brackets
- Hardware not included
SKU: n/a -
D Ring Shackle
D-Ring 7/8 Inch 6.5 Ton Rating Zinc Smittybilt – 13048
The ultimate in Comfort and Style! Plush vinyl or full fabric covering and contoured bucket seats assure total comfort. Unlimited recline positions and adjustable headrest keeps you alert, yet comfortable. Mounts to your factory seat slider and bracket. Available with leather grain vinyl or fabric seating surfaces. Seat adapters are required for installation in 1997-02 TJ Wranglers.
Details:- Fits 1976 to 2018 Wrangler and CJ
- Spice Denim
- Contoured bucket seat
- Unlimited recline positions with adjustable headrest
- 1997 and newer models require adapter brackets
- Hardware not included
SKU: n/a -
D Ring Shackle
D-Ring 7/8 Locking Pin 6.5 Tons (Black)Smittybilt – 13050B
Designed for early-model CJ vehicles. Rugged contoured seat with firm comfortable spring suspension. Installation is quick and easy using the same mounting hardware and bolts from the original seats.
Details:- Fits 1955 to 1976 CJ
- Traditional black vinyl
- Rugged contoured seat with firm comfortable spring suspension
- Uses same mounting hardware and bolts from original seats
- Passenger side seat bracket will need modified on 1955-75 CJ Foots
SKU: n/a -
D Ring Shackle
D-Ring 7/8 Locking Pin 6.5 Tons (Zink) Smittybilt – 13050
The ultimate in Comfort and Style! Plush vinyl or full fabric covering and contoured bucket seats assure total comfort. Unlimited recline positions and adjustable headrest keeps you alert, yet comfortable. Mounts to your factory seat slider and bracket. Available with leather grain vinyl or fabric seating surfaces. Seat adapters are required for installation in 1997-02 TJ Wranglers.
Details:- Fits 1976 to 2018 Wrangler and CJ
- Black Denim
- Contoured bucket seat
- Unlimited recline positions with adjustable headrest
- 1997 and newer models require adapter brackets
- Hardware not included
SKU: n/a -
D Ring Shackle
D-Ring Shackle Tab Poison Spyder – 45-42-010
The Poison Spyder D-Ring Shackle Tab allows fabricators to easily add a super-tough recovery attachment point to any structural member of the vehicle. CNC machined from 1 inch thick plate steel, these Shackle Tabs feature chambered edges for maximum weld penetration and a quality, finished appearance.
The tab is specifically designed to accept a 3/4 inch D-ring shackle. Sold by the piece.
Features:- CNC machined from 1 inch thick billet steel
- Provides an extreme duty attachment point for 3/4 inch screw-pin type shackles
- Angled design for the best clearance from rocks when welded to front or rear bumpers
- To be installed by certified welders only
SKU: 45-42-010-PSC -
Winches
DV8 Offroad WB12SC-HKJT 12000 LB Winch Black w/Steel Cable and Wireless Remot
DV8 Offroad 12000 pound Winch Black w/ Steel cable.
- 6hp motor 12DC series
- Gear Train: 3 staged planetary
- Gear reduction ratio 256:1
- Galvanized steel hook
- Metal control box
- Include all wiring and hardware
- 12.5 foot wired remote and Wireless remote and Steel Roller Fairlead
SKU: WB12SC -
Winches
DV8 Offroad WB12SR-HKJT 12000 LB Winch Black w/Synthetic Line and Wireless Remote
DV8 Offroad 12000 pound Winch Black w/ synthetic line.
- 6hp motor 12DC series
- Gear Train: 3 staged planetary
- Gear reduction ratio 256:1
- Galvanized steel hook
- Metal control box
- Include all wiring and hardware. 12.5 foot wired remote and Wireless remote and Hause Aluminum Fairlead
SKU: WB12SR -
Rope Splicing Tools
Fast Fid Rope Splicing Tool Red Factor 55
The Fast Fid is a rope splicing tool designed for rapid repairing/splicing of synthetic winch lines. The compact 2 piece design includes a unique wire grip for holding the end of winch ropes. No tape or other tools required.
Trail repair takes only minutes. Machined from billet aluminum, anodized for corrosion protection. Laser engraved rope bury data along with measuring scale. Convenient cordura carry pouch with belt loop.
Previous winch rope repair challenges have been eliminated with the Fast Fid. Winch rope trail repair has been reduced to only minutes. No additional hardware/tape required to repair or splice your synthetic winch line. Synthetic winch line is held firmly by the wire grip.
Features:- Color: Red
- Material: Billet Aluminum
- Includes Cordura carry pouch with belt loop
- For synthetic rope diameters 3/8-5/8 inch
SKU: 00420-01-GGBW -
Winch Shackle
FlatLink E Expert Version Winch Shackle Mount Assembly Anodized Gray Factor 55
The FlatLink E (Expert) is a variation of our popular foldable standard FlatLink winch shackle mount. The FlatLink E provides a means to eliminate the conventional winch hook and replace it with a safer and more secure screw pin shackle resulting in a Closed System Winching operation.
The large pear shaped shackle mounting hole allows for attachment to either the pin or bow end of common screw pin shackles, as well as common OEM recovery points. This makes the new FlatLink E more versatile than the current FlatLink design, but it also adds the possibility of a dangerous shackle side loading condition (See Picture), especially during momentary slack conditions. A shackle side loading condition is not possible with our standard
FlatLink shackle mount due to the shackle pin mounting constraint. For the recreational off roader we highly recommend the safer standard FlatLink product, not the FlatLink E. This way the winch operator does not have to monitor whether the shackle may have shifted and rotated in the recovery tackle.
The FlatLink E is only available in the Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to their secure screw pin attachment. The FlatLink E does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink E by a 5/8 inch diameter 6Al4V
Titanium double shear pin and internal snap ring. Installation takes only minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink E with 4 barbed tips each. The FlatLink E stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles.
Features:- Color: Anodized Gray
- Made in the USA
- Precision machined from 6000 series billet aluminum
- Compatible with all roller fairlead license plate mounting brackets
- When folded flat – less than 1.75 inches of thickness
- Weight – 26 ounces
- Max load rating : 16,000 pounds
- Ultimate failure : greater than 40,000 pounds
- Fits steel cables and synthetic winch ropes to 3/8 inch diameters
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage
- Simple snap ring removal for shear pin
- Fits common 3/4 shackles/D-Rings
- Eliminates hook rattle and fairlead damage
SKU: 00080-06-GGBW -
Winch Shackle
FlatLink Winch Shackle Mount Assembly Black Factor 55
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.
Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment.
The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips.
The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. The FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.
Features:- Color: Black
- Precision machined from 6000 series aluminum
- Compatible with all roller fairlead license plate mounting brackets
- When folded flat – less than 1.75 inches of thickness
- Weight – 23 ounces
- Max load rating : 16,000 pounds
- Ultimate failure : greater than 40,000 pounds
- Fits steel cables and synthetic winch ropes to 3/8 inch diameters
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage.
- Simple snap ring removal for shear pin.
- Fits common 3/4 shackles/D-Rings
- Eliminates hook rattle and fairlead damage
- Made In USA
SKU: 00050-04-GGBW -
Winch Shackle
FlatLink Winch Shackle Mount Assembly Blue Factor 55
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.
Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment.
The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips.
The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. The FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.
Features:- Color: Blue
- Precision machined from 6000 series aluminum
- Compatible with all roller fairlead license plate mounting brackets
- When folded flat – less than 1.75 inches of thickness
- Weight – 23 ounces
- Max load rating : 16,000 pounds
- Ultimate failure : greater than 40,000 pounds
- Fits steel cables and synthetic winch ropes to 3/8 inch diameters
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage.
- Simple snap ring removal for shear pin.
- Fits common 3/4 shackles/D-Rings
- Eliminates hook rattle and fairlead damage
- Made In USA
SKU: 00050-02-GGBW -
Winch Shackle
FlatLink Winch Shackle Mount Assembly Gray Factor 55
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.
Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment.
The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips.
The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. The FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.
Features:- Color: Gray
- Precision machined from 6000 series aluminum
- Compatible with all roller fairlead license plate mounting brackets
- When folded flat – less than 1.75 inches of thickness
- Weight – 23 ounces
- Max load rating : 16,000 pounds
- Ultimate failure : greater than 40,000 pounds
- Fits steel cables and synthetic winch ropes to 3/8 inch diameters
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage.
- Simple snap ring removal for shear pin.
- Fits common 3/4 shackles/D-Rings
- Eliminates hook rattle and fairlead damage
- Made In USA
SKU: 00050-06-GGBW -
Winch Shackle
FlatLink Winch Shackle Mount Assembly Red Factor 55
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.
Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment.
The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips.
The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. The FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.
Features:- Color: Red
- Precision machined from 6000 series aluminum
- Compatible with all roller fairlead license plate mounting brackets
- When folded flat – less than 1.75 inches of thickness
- Weight – 23 ounces
- Max load rating : 16,000 pounds
- Ultimate failure : greater than 40,000 pounds
- Fits steel cables and synthetic winch ropes to 3/8 inch diameters
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage.
- Simple snap ring removal for shear pin.
- Fits common 3/4 shackles/D-Rings
- Eliminates hook rattle and fairlead damage
- Made In USA
SKU: 00050-01-GGBW -
Winch Shackle
FlatLink Winch Shackle Mount Assembly Silver Factor 55
Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.
Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment.
The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips.
The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. The FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.
Features:- Color: Silver
- Precision machined from 6000 series aluminum
- Compatible with all roller fairlead license plate mounting brackets
- When folded flat – less than 1.75 inches of thickness
- Weight – 23 ounces
- Max load rating : 16,000 pounds
- Ultimate failure : greater than 40,000 pounds
- Fits steel cables and synthetic winch ropes to 3/8 inch diameters
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage.
- Simple snap ring removal for shear pin.
- Fits common 3/4 shackles/D-Rings
- Eliminates hook rattle and fairlead damage
- Made In USA
SKU: 00050-05-GGBW -
Winch Accessories
FlatLink XXL Rope Guard Silver Factor 55
The Rope Guard for the FlatLink XXL. For you hardcore off-roaders and off-road trainers, the new Rope Guard provides complete synthetic rope protection from damaging UV light as well as impact and abrasion damage. As you can see, when using the Rope Guard, all exposed synthetic rope surfaces are positioned behind the guard and fairlead, allowing you to use the Rope Guard as a skid surface when attempting to climb tall vertical obstacles.
- Made from Kaiser billet 6000 series aluminum and clear anodized for corrosion protection
- Easy DIY installation with 4 drive rivets
- Engineered and Made In The USA
- Sold As Each
SKU: 00384-GGBW
