JEEP SUSPENSION COMPONENTS
Showing 353–384 of 436 results
-
Heim Joints
Rubicon Express Coupler Assembly Super Flex Large W/1 Inch Extension – RE3769
Super-Flex Coupler Assembly W/1 Inch Extension. 1 inch longer than the RE3767. These assemblies are welded, powder coated Rubicon Grey and fully assembled ready for immediate use! Features a Large Super Flex housing and 1.25 inch threaded coupler used in Rubicon lower control arms.
Details:- Universal builder part
- Right Hand Threads
- Gray powder coat
- Large coupler assembly
- Rebuildable
SKU: RE3769 -
Mounting Brackets
Rubicon Express Crossmember Front Long Arm 3 Piece 07-18 JK/JKU – RE4521
JK Crossmember Front Long Arm. The Rubicon Express Extreme-Duty Long Arm System was the first radius long arm suspension available for the Jeep Jeep Wrangler JK. This system has been engineered to work With your Jeeps Electronic Stability Controls and Rubicon edition electronic sway bar without compromising safety. Featuring our world-class chromoly Radius Long Arms, the geometry has been meticulously designed to keep pinion and driveshaft angles in phase, while elimination suspension jacking and unwanted suspension squat. Our Extreme-Duty Long Arm system coupled With properly valved Rubicon Express shocks allows the JK Wrangler to transmit throttle input to the wheels over varied terrain, providing sure-footed traction and positive suspension feedback. The result is superior on road handling and unrivaled off road performance, without the need to disable factory safety features.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited With long arm suspension
- 2 and 4-door models
- For use With long arm suspension
- Welding required
SKU: RE4521 -
Track Bar
Rubicon Express CVO Drive Shaft Front 38.5 Inch Auto Trans Only 1310 Series Yolk 07-18 JK – RE1883-385
Track BarRubicon Express CVO Drive Shaft Front 38.5 Inch Auto Trans Only 1310 Series Yolk 07-18 JK – RE1883-385
JK Front CVO Drive Shaft For Automatic Transmission. Spicer drive shafts and components are as good as they get. This drive shaft is compatible With Atlas transfer cases and any other 1310 series CV yoke. Measurements are taken center to center on the u-joint With the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- Fits 2012 to 2014 Automatic Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-Door Models
- Automatic trans only
- Front CVO Drive Shaft
- 1310 Series Yoke
- Shaft Length: 38.5 Inches
- Finish Color: Black
- 2012-Present With Automatic Transmissions
- Requires RE1810 Yoke
SKU: RE1883-385 -
Alignment Caster / Camber Cam Bolt
Rubicon Express Degree Cam Bolt Kit Front Lower 07-18 JK/JKU – RE1476
Alignment Caster / Camber Cam BoltRubicon Express Degree Cam Bolt Kit Front Lower 07-18 JK/JKU – RE1476
JK Front Degree Cam Bolt Kit. These degree cam bolt kits from Rubicon Express allow for adjustment of your Jeeps Pinion Angle for proper driveline phasing and eliminating vibration.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Front lower cam bolts
- Sold as a pair
SKU: RE1476 -
Alignment Caster / Camber Cam Bolt
Rubicon Express Degree Cam Bolt Kit Rear Upper 07-18 JK/JKU – RE1477
Alignment Caster / Camber Cam BoltRubicon Express Degree Cam Bolt Kit Rear Upper 07-18 JK/JKU – RE1477
JK Degree Cam Bolt Kit. These degree cam bolt kits from Rubicon Express allow for adjustment of your Jeeps Pinion Angle for proper driveline phasing and eliminating vibration.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Rear lower cam bolts
- Sold as a pair
SKU: RE1477 -
Coil Springs
Rubicon Express Front Coil Spring Set 3.5-4.5 Inch 07-18 JK/JKU – RE1371
JK Front Coil Springs. Rubicon Express coils are designed to provide the best in ride quality without sacrificing durability and load capacity. All coils are powder coated silver. Our coils are made With the most advanced processes in the industry. Every coil is tested and checked for tested and checked for compliance to our rigid specifications.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- 3.5 inch lift (4-door models)
- 4.5 inch lift (2-door models)
- Front
- Sold as a pair
SKU: RE1371 -
Coil Springs
Rubicon Express Front Coil Springs 2.5 Inch 07-18 Wranger JK 2 Dr – RE1369
JK 2.5 Inch Replacement Front Coil Spring. Rubicon coils are designed to provide the best in ride quality without sacrificing durability and load capacity. All coils are powder coated silver. Our coils are made With the most advanced processes in the industry. Every coil is tested and checked for compliance to our rigid specifications.
Details:- Fits 2007-2016 Jeep JK Wrangler
- Coil Spring (1)
- 2.5 in. Lift
- Front
- Sold As Each
SKU: RE1369 -
Coil Springs
Rubicon Express Front Coil Springs 5.5 Inch 07-18 JKU 4 Dr – RE1373
JK 5.5 Inch Front Rubicon coils are designed to provide the best in ride quality without sacrificing durability and load capacity. All coils are powder coated silver. Our coils are made With the most advanced processes in the industry. Every coil is tested and checked for tested and checked for compliance to our rigid specifications.
Details:- Fits 2007 to 2018 Wrangler, Rubicon and Unlimited
- 5.5 inch Lift
- Sold as a pair
SKU: RE1373 -
Track Bar
Rubicon Express Front Forged Track Bar and HD Tie Rod with Forged Ends – JKHD1
The new Rubicon Express JK Wrangler front forged track bar features a heat treated steel construction designed to eliminate deflection caused by oversized tires or extreme side load. It features an adjustable sleeved collar which allows for precise axle alignment while still on the vehicle preventing the need to disassemble the suspension as well as OE style bushings for ultimate control and handling. The high clearance design allows for fitment from 0-6 Inch of lift with clearance throughout the suspension cycle. The heavy duty tie rod bar for your 07+ JK is tough enough for the biggest tires and hardest trails. Constructed of 1.5-inch .250-wall 4140 chromoly steel fitted with forged 1-ton tie drop bar, bending your steering is a thing of the past. Works with Dana 30/44/60.
Technical Details
- 07-Current Wrangler JK, 2 and 4 Door
- With 0-6 inch lift kits
- Heat treated forged steel
- Adjustable sleeved collar
- High clearance design for full clearance through out suspension cycle
- Stock style bushings
- Works with aftermarket diff covers
- Greaseable/replaceable 1-ton tie rod ends
- All metal design 1.250 Inch diameter induction hardened alloy steel (5140) ball studs
- Offset design provides clearance for larger axle housings and covers
- Can be used with OE wheels and back spacing
- Machined billet aluminum steering stabilizer mount included
SKU: JKHD1 -
Jeep Bump Stops
Rubicon Express Front Hydraulic Jeep Suspension Components|Jeep Bump Stops 07-18 JK/JKU – RE1382
Jeep Bump StopsRubicon Express Front Hydraulic Jeep Suspension Components|Jeep Bump Stops 07-18 JK/JKU – RE1382
JK Front Hydraulic Jeep Suspension Components|Jeep Bump Stops. Hydraulic “air bumps inch provide a huge increase in off-road performance by providing a smooth transition at full compression when compared to a harsh factory rubber bumpstop. The problem is that air bumps require custom fabrication for installation… until now. Rubicon Express has designed a bolt-on kit to add their 2.0-inch hydraulic Jeep Suspension Components|Jeep Bump Stops to 07+ two door JK and four door JK Unlimited Jeep Wranglers.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Improved performance at high speed
- Designed to work With RE extreme duty 4 link, 3 link and radius arm long arm kits
- Adjustable ride height
- Adjustable secondary spring rate engagement
- Increased wheel travel over stock
- Vehicle specific tuned shocks
- Shock geometry improves stability
- Sheet metal front and rear shock mount for maximum clearance and clean look
- 100 Per cent Made in the USA
- Sold In Pairs
SKU: RE1382 -
Track Bar Bushing Kit
Rubicon Express Front Jeep Suspension Components| Jeep Track Bars|Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing Kit 07-18 JK/JKU – RE1688
Track Bar Bushing KitRubicon Express Front Jeep Suspension Components| Jeep Track Bars|Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing Kit 07-18 JK/JKU – RE1688
JK Front Jeep Suspension Components| Jeep Track Bars|Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing Kit. Replace worn, infereior, rubber bushings With these replacement polyurethane bushings from Rubicon Express and improve the handling and performance of your Jeep.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
SKU: RE1688 -
Track Bar
Rubicon Express Front Track Bar TJ/XJ/MJ/ZJ – RE1600
TJ/XJ/MJ/ZJ Front Track Bar. Correct alignment and handling problems on lifted vehicles with our front adjustable chromoly track bar. Easy installation works on vehicles with 3.5 inch – 4.5 inch of lift. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance.
Details:- Fits 1997 to 2006 Jeep Wrangler TJ, Rubicon and Unlimited
- Fits 1984 to 2001 Jeep Cherokee XJ
- Fits 1986 to 1992 Jeep Comanche
- Fits 1993 to 1998 Jeep Grand Wagoneer ZJ
- Adjustable 3.5-4.5 Inches Lift
- Silver
SKU: RE1600 -
Track Bar
Rubicon Express Front Track Bar 07-18 JK/JKU W/Dana 60 – RE1682
JK W/Dana Front Track Bar. Correct alignment and handling problems on lifted vehicles With our front adjustable chromoly track bars. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited With Dana 60 front axle
- 2 and 4-door models
- For Dana 60 Axle
SKU: RE1682 -
Track Bar Mounting Brackets
Rubicon Express Front Track Bar Bracket 07-18 JK/JKU – RE1675
JK Front Track Bar Bracket. Our brackets are laser cut from 3/16 inch cold rolled steel and then CNC formed for unmatched precision and strength. These brackets are required for cleanly mounting a custom axle in your rig.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
SKU: RE1675 -
Track Bar
Rubicon Express Front Track Bar Extreme Duty 07-18 JK/JKU W/Dana 60 – RE1680
JK Front Track Bar. Correct alignment and handling problems on lifted vehicles With our front adjustable chromoly track bars. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance. This track bar cannot be mounted onto the Jeep without using #R/ERE1675 front track bar bracket.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Extreme duty
- Must be used With RE1675 track bar bracket
SKU: RE1680 -
Sway Bar End Links
Rubicon Express Gen II Axel Bullet Assembly – RE1187
Gen II Axle Bullet Assemblies are designed to replace damaged or worn-out bullets used in your Rubicon Express quick-disconnect sway bar end link system. Theyll easily bolt into place with modifications and are pre-drilled to accept the quick-release pin.
Details:- Gen II Axle end Bullet
- Made from Steel
- Sold As Each
SKU: RE1187 -
Sway Bar End Links
Rubicon Express Gen II Sway Bar Link 10 Inch – RE1185
Gen II 10 Inch Sway Bar Link. Keep your Jeeps Sway bar in its proper location after installing a suspension lift and ensure your Jeep handles safely with these sway bar links from Rubicon Express.
Details:- Gen II Sway Bar Link
- Length: 10 Inch
- Color: Silver
- Non-Greasable
- Sold As: Each
SKU: RE1185 -
Sway Bar End Links
Rubicon Express Gen II Sway Bar Link 6 Inch – RE1183
Gen II 6 Inch Sway Bar Link. Keep your Jeeps Sway bar in its proper location after installing a suspension lift and ensure your Jeep handles safely with these sway bar links from Rubicon Express.
Details:- Gen II Sway Bar Link
- Length: 6 Inch
- Color: Silver
- Non-Greasable
- Sold As: Each
SKU: RE1183 -
Track Bar Bushing Kit
Rubicon Express Heavy Duty Jeep Suspension Components| Jeep Track Bars|Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing Kit 2 Inch Front – RE1687
Track Bar Bushing KitRubicon Express Heavy Duty Jeep Suspension Components| Jeep Track Bars|Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing Kit 2 Inch Front – RE1687
Heavy-Duty Front Jeep Suspension Components| Jeep Track Bars|Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing Kit. Replace worn, inferior, rubber factory bushings with these replacement polyurethane bushings from Rubicon Express and improve the handling and performance of your Jeep.
Details:- 1/2 inch
- Front
- Designed for Rubicon Express track bars RE1610 and RE1660
- Will not work with stock track bar
SKU: RE1687 -
Track Bar
Rubicon Express Heavy Duty Track Bar 07-18 JK – RE1683
JK Heavy Duty Forged Front Adjustable Track Bar from Rubicon Express is a great edition to any Jeep Wrangler JK. Rubicon Express front forged track bar features a heat treated steel construction designed to eliminate deflection caused by oversized tires or extreme side load. It features an adjustable sleeved collar which allows for precise axle alignment while still on the vehicle preventing the need to disassemble the suspension as well as OE style bushings for ultimate control and handling. The bend in the bar is designed to clear any differential cover. You can precisely center your front axle under your Jeep without disassembling the suspension With the adjustable sleeved collar. Works With up to 6 inches of lift.
Details:- Fits 2007-18 JK Wrangler Up to 6 Inches Lift
- Direct bolt on design
- Heat treated forged steel construction
- Adjustable sleeved collar
- High clearance design for full clearance throughout suspension cycle
- Silver Powdercoat
- OE style bushings
SKU: RE1683 -
High Misalignment Spacers
Rubicon Express High Misalignment Spacer 12MM CNC Machined Rear – RM10240
High-Misalignment Spacer. CNC machined and Zinc plated for corrosion resistance. These Hi-Misalignment spacers will allow for greater operating angle from your heim joints.
Details:- 12mm narrow
- CNC machined
- Zinc plated
- Sold individually
SKU: RM10240 -
Heim Joints
Rubicon Express Housing And Coupler Super Flex Large – RM30205
Super-Flex Coupler Housing W/Coupler. Featuring a large S/F housing and 1.25 inch threaded coupler welded and powder coated grey, used in Rubicon lower control arms. Super Flex joint sold separately.
Details:- Universal builder part
- Housing and coupler only
- Left Hand Threads
- Internals must be purchased separately
SKU: RM30205 -
Track Bar Bushing
Rubicon Express Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing – RM42001
Track Bar BushingRubicon Express Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing – RM42001
Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing. Polyurethane Jeep Suspension Components| Jeep Track Bars|Track Bar Bushings are engineered to prevent the entire front or rear end from switching left to right unannounced, greatly improving steering feel and response.
Details:- Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing
- Polyurethane
- Sold As Each
SKU: RM42001 -
Control Arms
Rubicon Express JK Control Arm Rear Upper Adjustable Extreme duty 07-18 JK/JKU – RE4540
JK Extreme-Duty Arm And Brackets 3-Link Upgrade Components. Rubicon Express is proud to announce the release of the new 3-link rear suspension upgrade for Jeep JKs. This new system delivers unmatched articulation and control for the JK platform making it perfect for the hardcore rock crawler. With improved suspension geometry, this 3-link provides better traction, while eliminating “rear steer inch and bushing bind. This system features a robust CNC laser cut axle truss, an adjustable chromoly center link, a differential support ring and high quality hardware. The system is easy to install and adjust for maximum performance. It is designed as a bolt on for Dana 44 housings. It can be ordered as an upgrade kit for vehicles equipped With a 3.5 inch and 4.5 inch Rubicon Express Extreme Duty Long Arm Suspension. Like all Rubicon Express products, this system is made in the USA and backed by the Rubicon Express Advantage Lifetime Warranty.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- Fits 2 and 4-door models
- Chromoly Centerlink
- High Quality Hardware Included
- Compatible With Rubicon Express Extreme Duty Long Arm Systems
SKU: RE4540 -
-
Sway Bar Disconnect
Rubicon Express JK Sway Bar Disconnects 2.5-6 Inches 07-18 JK – RE1132
JK Extreme-Duty Sway Bar Disconnects provide a fast and easy way to disconnect your front sway bar for increased front axle articulation. Now you can tackle challenging obstacles With greater flexibility. The heavy duty threaded body allows adjustment for different lift heights and easy setting of sway bar angle. The zinc-plated snap pin makes disconnect easy and the tapered post and spherical bushing make reconnecting the front sway bar easy regardless of irregular terrain no tools required! Pre-installed grease fittings for easy service and quiet operation. These disconnects work With stock and lifted suspensions for increased axle articulation and their silver powder coat finish adds lasting performance and good looks. Easy bolt-on installation.
Details:- Fits 2007 to 2018 JK Wrangler With 2.5 to 6 inches of lift
- Significantly improves suspension travel for enhanced off-road performance
- Greasable Bushings
- Heavy Duty steel construction provides high strength and long life
SKU: RE1132 -
Control Arms
Rubicon Express Large Super-Flex Joint Assembly Tool – RE3772
Large Super-Flex 2 Cartridge rebuild tool. This socket fits Rubicon Express’ large size Super-Flex 2 Cartridge. It is designed to fit your 1/2 Inch drive tool, and matches the threaded end of our cartridge perfectly. A real time saver when the time comes to service your control arms.
Technical Details
- Used to rebuild large Super-Flex Coupler
- 1/2 Inch drive
- Only work on Rubicon Express couplers
SKU: RE3772
