Jeep Track Bars
Showing 33–46 of 46 results
-
Track Bar Mounting Brackets
Rubicon Express Front Track Bar Bracket 07-18 JK/JKU – RE1675
JK Front Track Bar Bracket. Our brackets are laser cut from 3/16 inch cold rolled steel and then CNC formed for unmatched precision and strength. These brackets are required for cleanly mounting a custom axle in your rig.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
SKU: RE1675 -
Track Bar
Rubicon Express Front Track Bar Extreme Duty 07-18 JK/JKU W/Dana 60 – RE1680
JK Front Track Bar. Correct alignment and handling problems on lifted vehicles With our front adjustable chromoly track bars. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance. This track bar cannot be mounted onto the Jeep without using #R/ERE1675 front track bar bracket.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Extreme duty
- Must be used With RE1675 track bar bracket
SKU: RE1680 -
Track Bar
Rubicon Express Heavy Duty Track Bar 07-18 JK – RE1683
JK Heavy Duty Forged Front Adjustable Track Bar from Rubicon Express is a great edition to any Jeep Wrangler JK. Rubicon Express front forged track bar features a heat treated steel construction designed to eliminate deflection caused by oversized tires or extreme side load. It features an adjustable sleeved collar which allows for precise axle alignment while still on the vehicle preventing the need to disassemble the suspension as well as OE style bushings for ultimate control and handling. The bend in the bar is designed to clear any differential cover. You can precisely center your front axle under your Jeep without disassembling the suspension With the adjustable sleeved collar. Works With up to 6 inches of lift.
Details:- Fits 2007-18 JK Wrangler Up to 6 Inches Lift
- Direct bolt on design
- Heat treated forged steel construction
- Adjustable sleeved collar
- High clearance design for full clearance throughout suspension cycle
- Silver Powdercoat
- OE style bushings
SKU: RE1683 -
High Misalignment Spacers
Rubicon Express High Misalignment Spacer 12MM CNC Machined Rear – RM10240
High-Misalignment Spacer. CNC machined and Zinc plated for corrosion resistance. These Hi-Misalignment spacers will allow for greater operating angle from your heim joints.
Details:- 12mm narrow
- CNC machined
- Zinc plated
- Sold individually
SKU: RM10240 -
Heim Joints
Rubicon Express Housing And Coupler Super Flex Large – RM30205
Super-Flex Coupler Housing W/Coupler. Featuring a large S/F housing and 1.25 inch threaded coupler welded and powder coated grey, used in Rubicon lower control arms. Super Flex joint sold separately.
Details:- Universal builder part
- Housing and coupler only
- Left Hand Threads
- Internals must be purchased separately
SKU: RM30205 -
Track Bar Bushing
Rubicon Express Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing – RM42001
Track Bar BushingRubicon Express Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing – RM42001
Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing. Polyurethane Jeep Suspension Components| Jeep Track Bars|Track Bar Bushings are engineered to prevent the entire front or rear end from switching left to right unannounced, greatly improving steering feel and response.
Details:- Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing
- Polyurethane
- Sold As Each
SKU: RM42001 -
Track Bar Mounting Brackets
Rubicon Express Rear Lower Track Bar Bracket 07-18 JK/JKU – RE1609
JK Lower Track Bar Bracket. Recommended for raised vehicles to reset axle location and geometry realignment
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- With 4 link long arm lift kits
SKU: RE1609 -
Track Bar
Rubicon Express Rear Track Bar 07-18 JK/JKU – RE1690
JK Rear Track Bar replaces the stock rear track bar on 2 and 4-door Jeep Jeep Wrangler JKs With lift heights of 3.5-inches or more. The rear track bar is adjustable in length and designed With a double bend specifically for the JK to give maximum clearance between suspension components. This allows precise centering of the rear axle after installation of a suspension lift. The RE1690 is made from 1-3/8 x 3/16 inch wall 4130 chromoly. It is designed to clear many after-market axle housings including the Dana 44, 60 and Ford 9 inch.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
SKU: RE1690 -
Track Bar
Rubicon Express Rear Upper Track Bar 07-18 JK – RE1606
JK Rear Upper Track Bar Bracket. Correct alignment and handling problems on lifted vehicles With our front adjustable chromoly track bar. Easy installation works on vehicles With 3.5 inch inch – 4.5 inch inch of lift. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Use With 2.5-3.5 inch of lift
- Frame side
SKU: RE1606 -
Heim Joints
Rubicon Express Rod End Coupler And Housing Super Flex Large – RM30215
Super-Flex Rod End Housing W/Coupler. Featuring a large S/F housing and 1.25 inch threaded coupler welded and powder coated grey, used in Rubicon lower control arms. Super Flex joint sold separately.
Details:- Universal builder part
- Housing and coupler only
- Right Hand Threads
- Internals must be purchased separately
SKU: RM30215 -
Track Bar Mounting Brackets
Rubicon Express Track Bar Bracket Rear Lower 07-18 JK/JKU – RE1607
JK Rear Lower Track Bar Bracket. Our brackets are laser cut from 3/16 inch cold rolled steel and then CNC formed for unmatched precision and strength. These brackets are required for cleanly mounting a custom axle in your rig.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Black Powder Coated
SKU: RE1607 -
Track Bar Mounting Brackets
Track Bar Bracket Raised Height Dana 30/44 Front Axle 07-Pres Wrangler JK/JK Unlimited G2 Axle and Gear 68-2051-3
Track Bar Mounting BracketsTrack Bar Bracket Raised Height Dana 30/44 Front Axle 07-Pres Wrangler JK/JK Unlimited G2 Axle and Gear 68-2051-3
The all new G2 Heavy Duty JK Dana 30 and Dana 44 Stock Height Track Bar Bracket gives your axle the strength it needs to tackle the hardest trails. Formed from laser cut 1/4in. thick steel, this bracket is designed to give a precision fit, ensuring trouble-free installation. Welding is required, and some grinding may be necessary. Professional welding skills are strongly recommended.
Details:- Fits 2007 to 2016 JK Dana 30 and Dana 44 front axle
- 2 and 4-door Models
- Heavy-duty steel construction
- Unpainted
- Adjusts factory track bar mounting location for lifted applications
- Welding required
- Without steering ram mount
SKU: 68-2051-3
