Tramp Stamp
Showing all 7 results
-
Tramp Stamp
DV8 Offroad TS01RJK-HKJT Tramp Stamp Rear Tailgate Cover
The DV8 Tramp Stamp fits over the raised vent area in the center of the tailgate. These are very useful for those who have deleted or relocated the spare tire. CNC-laser cut from 3/16 inch steel the stamp comes powder coated in a textured black finish and installs easily using the stock tire carrier mounting bolts. Installing the tramp stamp requires removal of the stock air vent flaps, so that it may sit flat against the tailgate for a clean appearance.
Features:- Tramp Stamp Rear Tailgate Cover Plate
- 3/16 inch Steel
- Powdercoat Textured Black
- Fits 2007-2018 Jeep Wrangler
SKU: TS01RJK -
Tramp Stamp
JK Tramp Stamp II (Tall Vent) Poison Spyder – 18-04-013-01
JK Tramp Stamp II (Tall Vent)for Jeep Wrangler JK 2007-2016. The Poison Spyder JK Tramp Stamp perfectly fits over the raised vent area in the center of the tailgate to complete the Poison Spyder gear surrounding your Jeep JK. The center of the Tramp Stamp II is cut out to allow the tailgate vents to function properly. The Tramp Stamp II is easily mounted using the Stock spare tire carrier bolts (no drilling required). This part is CNC laser cut from 1/8 inch aluminum plate, and is powdercoated in a textured black finish.
The JK License Plate Mount is available separately or in a bundle with the Tramp Stamp II. If using this item to relocate the license plate, we also recommend using the LED License Plate Light and the Stock License Plate Delete Cover.
Note: This item fits JKs with the Wide Vent on the tailgate (vent is wider than it is tall).These are generally found on 2010 and newer JKs, however they have also been found on some 2009s. This item is Not a direct fit for JKs with the Tall tailgate vent (taller than it is wide), which were typically found on 2007-2009 JKs.
On Jeeps with vertical tall vent, this item may be used if the vent assembly is either removed or trimmed to fit. Regardless of your year model, we strongly advise that you visually verify which vent your JK is equipped with before ordering (will require removal of the Stock spare tire mount).
Features:- Updated JK Tramp Stamp design with center cut out to retain the factory dust vent (tall vent only)
- CNC laser cut from light weight aluminum sheet
- Cleans up Jeep appearance when the Stock spare tire carrier is removed
- Easily installs using OE spare tire bolts
- Textured black powdercoat finish
SKU: 18-04-013-01-PSC -
Tramp Stamp
JK Tramp Stamp II (Tall Vent) with License Plate Mount Poison Spyder – 18-04-013
JK Tramp Stamp II (Tall Vent) with License Plate Mount for Jeep Wrangler JK 2007-2016. The Poison Spyder JK Tramp Stamp perfectly fits over the raised vent area in the center of the tailgate to complete the Poison Spyder gear surrounding your Jeep JK. The center of the Tramp Stamp II is cut out to allow the tailgate vents to function properly. The Tramp Stamp II is easily mounted using the Stock spare tire carrier bolts (no drilling required). This part is CNC laser cut from 1/8 inch aluminum plate, and is powdercoated in a textured black finish.
The JK License Plate Mount is available separately or in a bundle with the Tramp Stamp II. If using this item to relocate the license plate, we also recommend using the LED License Plate Light and the Stock License Plate Delete Cover.
Note: This item fits JKs with the Wide Vent on the tailgate (vent is wider than it is tall).These are generally found on 2010 and newer JKs, however they have also been found on some 2009s. This item is Not a direct fit for JKs with the Tall tailgate vent (taller than it is wide), which were typically found on 2007-2009 JKs.
On Jeeps with vertical tall vent, this item may be used if the vent assembly is either removed or trimmed to fit. Regardless of your year model, we strongly advise that you visually verify which vent your JK is equipped with before ordering (will require removal of the Stock spare tire mount).
Features:- JK Tramp Stamp II (tall vent only) bundled with JK License Plate Mount
- CNC laser cut from light weight aluminum sheet
- Cleans up Jeep appearance when the Stock spare tire carrier is removed
- Easily installs using OE spare tire bolts
- Textured black powdercoat finish
SKU: 18-04-013-PSC -
Tramp Stamp
JK Tramp Stamp II (Wide Vent) Poison Spyder – 18-04-012-01
JK Tramp Stamp II (Wide Vent) for Jeep Wrangler JK 2007-2016. The Poison Spyder JK Tramp Stamp perfectly fits over the raised vent area in the center of the tailgate to complete the Poison Spyder gear surrounding your Jeep JK. The center of the Tramp Stamp II is cut out to allow the tailgate vents to function properly. The Tramp Stamp II is easily mounted using the Stock spare tire carrier bolts (no drilling required). This part is CNC laser cut from 1/8 inch aluminum plate, and is powdercoated in a textured black finish.
The JK License Plate Mount is available separately or in a bundle with the Tramp Stamp II. If using this item to relocate the license plate, we also recommend using the LED License Plate Light and the Stock License Plate Delete Cover.
Note: This item fits JKs with the Wide Vent on the tailgate (vent is wider than it is tall).These are generally found on 2010 and newer JKs, however they have also been found on some 2009s. This item is Not a direct fit for JKs with the Tall tailgate vent (taller than it is wide), which were typically found on 2007-2009 JKs.
On Jeeps with vertical tall vent, this item may be used if the vent assembly is either removed or trimmed to fit. Regardless of your year model, we strongly advise that you visually verify which vent your JK is equipped with before ordering (will require removal of the Stock spare tire mount).
Features:- Updated JK Tramp Stamp design with center cut out to retain the factory dust vent (wide vent only)
- CNC laser cut from light weight aluminum sheet
- Cleans up Jeep appearance when the Stock spare tire carrier is removed
- Easily installs using OE spare tire bolts
- Textured black powdercoat finish
SKU: 18-04-012-01-PSC -
Tramp Stamp
JK Tramp Stamp II (Wide Vent) with License Plate Mount Poison Spyder – 18-04-012
JK Tramp Stamp II (Wide Vent) with License Plate Mount for Jeep Wrangler JK 2007-2016. The Poison Spyder JK Tramp Stamp perfectly fits over the raised vent area in the center of the tailgate to complete the Poison Spyder gear surrounding your Jeep JK. The center of the Tramp Stamp II is cut out to allow the tailgate vents to function properly. The Tramp Stamp II is easily mounted using the Stock spare tire carrier bolts (no drilling required). This part is CNC laser cut from 1/8 inch aluminum plate, and is powdercoated in a textured black finish.
The JK License Plate Mount is available separately or in a bundle with the Tramp Stamp II. If using this item to relocate the license plate, we also recommend using the LED License Plate Light and the Stock License Plate Delete Cover.
Note: This item fits JKs with the Wide Vent on the tailgate (vent is wider than it is tall).These are generally found on 2010 and newer JKs, however they have also been found on some 2009s. This item is Not a direct fit for JKs with the Tall tailgate vent (taller than it is wide), which were typically found on 2007-2009 JKs.
On Jeeps with vertical tall vent, this item may be used if the vent assembly is either removed or trimmed to fit. Regardless of your year model, we strongly advise that you visually verify which vent your JK is equipped with before ordering (will require removal of the Stock spare tire mount).
Features:- JK Tramp Stamp II (wide vent only) bundled with JK License Plate Mount
- CNC laser cut from light weight aluminum sheet
- Cleans up Jeep appearance when the Stock spare tire carrier is removed
- Easily installs using OE spare tire bolts
- Textured black powdercoat finish
SKU: 18-04-012-PSC -
Tramp Stamp
JK Tramp Stamp Poison Spyder – 18-04-011
Poison Spyder JK Tramp Stamp for Jeep Wrangler JK 2007-2016 perfectly fits over the raised vent area in the center of the tailgate to complete the Poison Spyder gear surrounding your Jeep JK. These are especially useful for those who have deleted or relocated the spare tire, covering the unsightly vent flaps with a great looking Poison Spyder piece.
The JK Tramp Stamp includes holes and rivets for mounting the license plate, for those who have installed Poison Spyder Crusher Corners and need to relocate the license plate. The JK Tramp Stamp is CNC laser cut from light weight aluminum sheet and is Not intended as armor. It features the instantly recognizable Poison Spyder logo, marking your Jeep as one that is always ready and willing for some hardcore action! The JK Tramp Stamp comes powdercoated textured black. Easily installs using the Stock tire carrier mounting bolts.
Features:- The Original JK Tramp Stamp!
- Clean, flat look requires removal of plastic dust vent assembly
- CNC laser cut from light weight aluminum sheet
- Cleans up Jeep appearance when the Stock spare tire carrier is removed
- Easily installs using OE spare tire bolts
- Textured black powdercoat finish
Installing the JK Tramp Stamp requires removal of the Stock air vent flaps, so the Tramp Stamp may sit flat against the tailgate for a clean appearance. For those who prefer to keep the air vent flaps, we Now offer the Tramp Stamp II and License Plate Mount, which may be purchased separately or together in our JK Tramp Stamp II with License Plate Mount bundle.
SKU: 18-04-011-PSC -
Tramp Stamp
Rough Coutry Jeep Tailgate Vent / Spare Tire Mount Delete (Wrangler JK / JKU) 10514
Delete your spare tire and dress up the back of your JK with Rough Countrys Spare Tire Delete Vent Cover for Jeep JK! This stylish, louvered cover fits perfectly over your JKs rear vent, drastically improving the looks of your Jeep after removing the spare tire and carrier.
Buying a 5th tire and wheel gets expensive, and many aftermarket tires and wheels are simply too large to use on a rear tire carrier. Delete your spare tire and improve the look of this now visible area with this easy to install product.
Each Vent Cover is laser-cut and powdercoated black for a precise fit and a long lasting lifespan of good looks. Includes a lifetime replacement warranty!
Rough Country’s Jeep Tailgate Vent / Spare Tire Mount Delete (Wrangler JK / JKU) – 10514
SKU: 10514
