Rubicon Express
Showing 193–224 of 366 results
-
Drive Shaft
Rubicon Express Drive Shaft Package for 12-17 JK Wrangler Unlimited and Rubicon Unlimited (Manual Trans) and 07-11 JK Wrangler Unlimited and Rubicon Unlimited – JK1802
Drive ShaftRubicon Express Drive Shaft Package for 12-17 JK Wrangler Unlimited and Rubicon Unlimited (Manual Trans) and 07-11 JK Wrangler Unlimited and Rubicon Unlimited – JK1802
Prevent driveline vibration after you lift your Jeep JK with our Dana Spicer 1310 CV style JK driveshafts. Designed to replace the factory shafts and to be ran with our replacement yoke and flange for the transfer case. Built for daily driving and the demands of off roading. Driveshaft lengths are for factory gasoline motors.
Technical Details
- Fits 2012 to 2018 JK Wrangler Unlimited and Rubicon Unlimited
- 4-door models
- Manual transmission
- Fits 2007 to 2011 JK Wrangler Unlimited and Rubicon Unlimited
- 4-door models
- Manual or automatic transmission
- Includes front and rear drive shafts and yoke flanges
- 1310 U-joints
- Dynamically balanced to eliminate vibration
- Available from 15.5 to 38.5 inches long
- Recommended in vehicles with 3.5 inches or more of lift
- Billet aluminum flange
SKU: JK1802 -
Steering Stabilizer
Rubicon Express Dual Steering Stabilizer Bracket Kit – RE1001
The all new Rubicon Express stabilizer bracket kit allows for mounting of dual 36mm monotube steering stabilizes. Designed to aid in reducing steering vibration and wear and tear of your steering components. The finish features a durable powder coat finish to resist scratches and corrosion.
Technical Details
- 2 and 4-door models
- Direct axle bolt-on bracket
- Includes Grade 8 hardware
- Made in the USA
SKU: RE1001 -
EVAP Canister Skid Plate
Rubicon Express Evaporator Canister Skid Plate 07-18 JK/JKU – REA1017
JK Evaporator Skid Plate. The plastic evaporative canister used in Jeep Jeep Wrangler JKs provides an essential function in the emissions system, but is very vulnerable in extreme off-roading conditions.The all new Rubicon Express JK Evap Skid Plate provides a solution by protecting the canister With a rugged skid plate. The JK Evap Skid Plate formed from 3/16 inch plate steel to withstand even the hardest hits. It completely surrounds the evap canister to provide all-around protection.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Made of 3/16 steel for added armor
- Protects a vulnerable and expensive emissions component
- No drill installation
- Precision Laser cut for exact fit
- Black Powder Coated
SKU: REA1017 -
Uncategorized
Rubicon Express Exhaust Loop Bypass Pipe – RE4531
When you want to upgrade your suspension system but are not ready to invest heavily into an all-new suspension kit, Rubicon Express has you covered. They offer the highest quality suspension components at an affordable price, which means that you can replace your stock coils, bushings and any other thing you need and get back on the road with your vehicle riding the way you want it to. So don’t skimp on the small yet vital parts, especially when Rubicon Express has all products that you’re looking for. From bushings for 1950s models to sway bar links for late models, Rubicon has the parts to keep your vehicle’s suspension system in mint condition.
Technical Details
- Fits 2011 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Front
- Engineered to exceed OEM quality standards
- CARB Compliant
SKU: RE4531 -
Exhaust Spacer
Rubicon Express Exhaust Spacer Kit Driver/Pass Side 12-Pres JK – RE4532
JK Exhaust Spacer Kit is needed for all 2012-Present Jeep JKs using; suspension kits With 3 inch or more of lift.. The spacers are installed between the driver and; passenger head pipe flanges and the flanges of the exhaust cross pipe which moves the exhaust cross pipe rearward. This prevents contact between the front driveshaft and the exhaust cross pipe during suspension down travel.
Details:- 2012-Present Jeep JK exhaust spacers
- Spacers are needed on JKs lifted 3 inch or more
- Spacers prevent contact between front driveshaft and exhaust cross pipe
- Driver and passenger spacers included
- Includes all necessary hardware
SKU: RE4532 -
Long Arm Lift Kits
Rubicon Express Extreme Duty Radius Long Arm Upgrade Kit – JKRR00
Extreme Duty Radius Long Arm Upgrade Kit; 4 Link Front/3 Link Rear
Technical Details
- 2 and 4-door models
- 2 Inch x .250 wall Chromoly tubing lower control arms
- Adjustable control arms
- Super-Flex sperical ball joints
- PT-Meg super-ride bushings
- Full width transmission crossmember
- No welding required
SKU: JKRR00 -
-
Brake Lines
Rubicon Express Front Brake Line Set 20 Inch Stainless Steel 07-18 JK – RE1553
JK 20 Inch Stainless Steel Flexible Front Brake Line. Rubicon brake lines are as good as they get. We build them to last. Features are thick stainless steel outer casing riding on a rubber casing outside a kevlar casing housing a Teflon inner hose. Mounting brackets included where necessary. So dont neglect your brakes. Always properly bleed system after installation and verify that brake lines do not contact tires, moving suspension components and that length is sufficient for full travel. Built to DOT specifications.
Details:- Brake Line Set
- 20 Inch
- Front
- Flexible Stainless Steel
- Pair
SKU: RE1553 -
Brake Lines
Rubicon Express Front Brake Line Set 24 Inch Stainless Steel 07-18 JK/JKU – RE1530
JK 22 Inch Stainless Steel Front Brake Line Set. Replace the stock rubber JK brake lines With the Rubicon Express stainless steel protected Teflon brake line kits. Our steel-braided brake lines are protected With a vinyl cover and provide firmer and more responsive braking. Mounting brackets included where necessary. JK front brake line kits include 2 brake lines. Meets DOT requirements.
Details:- Fits 2007 to 2014 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- 22 inch long w/hardware
- Sold as a pair
SKU: RE1530 -
Brake Lines
Rubicon Express Front Brake Line Set 24 Inch W/Install Kit Stainless Steel 07-18 JK/JKU – RE15302
Brake LinesRubicon Express Front Brake Line Set 24 Inch W/Install Kit Stainless Steel 07-18 JK/JKU – RE15302
JK 24 Inch Stainless Steel Front Brake Line Set. Replace the stock rubber JK brake lines With the Rubicon Express stainless steel protected Teflon brake line kits. Our steel-braided brake lines are protected With a vinyl cover and provide firmer and more responsive braking. Mounting brackets included where necessary. JK front brake line kits include 2 brake lines. Meets DOT requirements.
Details:- Fits 2007 to 2014 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- 24 inch long w/hardware
- Sold as a pair
SKU: RE15302 -
Coil Springs
Rubicon Express Front Coil Spring Set 3.5-4.5 Inch 07-18 JK/JKU – RE1371
JK Front Coil Springs. Rubicon Express coils are designed to provide the best in ride quality without sacrificing durability and load capacity. All coils are powder coated silver. Our coils are made With the most advanced processes in the industry. Every coil is tested and checked for tested and checked for compliance to our rigid specifications.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- 3.5 inch lift (4-door models)
- 4.5 inch lift (2-door models)
- Front
- Sold as a pair
SKU: RE1371 -
Coil Springs
Rubicon Express Front Coil Springs 2.5 Inch 07-18 Wranger JK 2 Dr – RE1369
JK 2.5 Inch Replacement Front Coil Spring. Rubicon coils are designed to provide the best in ride quality without sacrificing durability and load capacity. All coils are powder coated silver. Our coils are made With the most advanced processes in the industry. Every coil is tested and checked for compliance to our rigid specifications.
Details:- Fits 2007-2016 Jeep JK Wrangler
- Coil Spring (1)
- 2.5 in. Lift
- Front
- Sold As Each
SKU: RE1369 -
Coil Springs
Rubicon Express Front Coil Springs 5.5 Inch 07-18 JKU 4 Dr – RE1373
JK 5.5 Inch Front Rubicon coils are designed to provide the best in ride quality without sacrificing durability and load capacity. All coils are powder coated silver. Our coils are made With the most advanced processes in the industry. Every coil is tested and checked for tested and checked for compliance to our rigid specifications.
Details:- Fits 2007 to 2018 Wrangler, Rubicon and Unlimited
- 5.5 inch Lift
- Sold as a pair
SKU: RE1373 -
Shock Mount
Rubicon Express Front Coilover Shock Mount 07-18 JK/JKU – RE4548
JK Front Coilover Shock Mount Kit. The advantages of coilover kits include increased wheel travel, optimized shock damping and the ability to customize spring rates to suit your specific needs. FOXs threaded shock bodies make it easy to fine tune ride height for even more customization. Dual coil springs result in a progressive spring rate that is comfortable on the street and over small bumps on the trail while still providing stability and control over large obstacles. Remote reservoirs increase fluid capacity for cool, consistent shock damping. Rubicon Express coilover mounts are made in the USA from plate steel to maximize clearance.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Steel Bracket Kit to Mount Coilover Shocks
SKU: RE4548 -
Track Bar
Rubicon Express Front Forged Track Bar and HD Tie Rod with Forged Ends – JKHD1
The new Rubicon Express JK Wrangler front forged track bar features a heat treated steel construction designed to eliminate deflection caused by oversized tires or extreme side load. It features an adjustable sleeved collar which allows for precise axle alignment while still on the vehicle preventing the need to disassemble the suspension as well as OE style bushings for ultimate control and handling. The high clearance design allows for fitment from 0-6 Inch of lift with clearance throughout the suspension cycle. The heavy duty tie rod bar for your 07+ JK is tough enough for the biggest tires and hardest trails. Constructed of 1.5-inch .250-wall 4140 chromoly steel fitted with forged 1-ton tie drop bar, bending your steering is a thing of the past. Works with Dana 30/44/60.
Technical Details
- 07-Current Wrangler JK, 2 and 4 Door
- With 0-6 inch lift kits
- Heat treated forged steel
- Adjustable sleeved collar
- High clearance design for full clearance through out suspension cycle
- Stock style bushings
- Works with aftermarket diff covers
- Greaseable/replaceable 1-ton tie rod ends
- All metal design 1.250 Inch diameter induction hardened alloy steel (5140) ball studs
- Offset design provides clearance for larger axle housings and covers
- Can be used with OE wheels and back spacing
- Machined billet aluminum steering stabilizer mount included
SKU: JKHD1 -
Jeep Bump Stops
Rubicon Express Front Hydraulic Jeep Suspension Components|Jeep Bump Stops 07-18 JK/JKU – RE1382
Jeep Bump StopsRubicon Express Front Hydraulic Jeep Suspension Components|Jeep Bump Stops 07-18 JK/JKU – RE1382
JK Front Hydraulic Jeep Suspension Components|Jeep Bump Stops. Hydraulic “air bumps inch provide a huge increase in off-road performance by providing a smooth transition at full compression when compared to a harsh factory rubber bumpstop. The problem is that air bumps require custom fabrication for installation… until now. Rubicon Express has designed a bolt-on kit to add their 2.0-inch hydraulic Jeep Suspension Components|Jeep Bump Stops to 07+ two door JK and four door JK Unlimited Jeep Wranglers.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Improved performance at high speed
- Designed to work With RE extreme duty 4 link, 3 link and radius arm long arm kits
- Adjustable ride height
- Adjustable secondary spring rate engagement
- Increased wheel travel over stock
- Vehicle specific tuned shocks
- Shock geometry improves stability
- Sheet metal front and rear shock mount for maximum clearance and clean look
- 100 Per cent Made in the USA
- Sold In Pairs
SKU: RE1382 -
Track Bar Bushing Kit
Rubicon Express Front Jeep Suspension Components| Jeep Track Bars|Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing Kit 07-18 JK/JKU – RE1688
Track Bar Bushing KitRubicon Express Front Jeep Suspension Components| Jeep Track Bars|Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing Kit 07-18 JK/JKU – RE1688
JK Front Jeep Suspension Components| Jeep Track Bars|Jeep Suspension Components| Jeep Track Bars|Track Bar Bushing Kit. Replace worn, infereior, rubber bushings With these replacement polyurethane bushings from Rubicon Express and improve the handling and performance of your Jeep.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
SKU: RE1688 -
Shock Absorber Extender
Rubicon Express Front Shock Extender 07-18 JK/JKU – RE2003
JK Front Shock Extensions. Rubicon Express Shock Extensions are a must have when running a CV driveshaft for shock body clearance on your vehicle.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Sold As A Pair
SKU: RE2003 -
Track Bar
Rubicon Express Front Track Bar TJ/XJ/MJ/ZJ – RE1600
TJ/XJ/MJ/ZJ Front Track Bar. Correct alignment and handling problems on lifted vehicles with our front adjustable chromoly track bar. Easy installation works on vehicles with 3.5 inch – 4.5 inch of lift. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance.
Details:- Fits 1997 to 2006 Jeep Wrangler TJ, Rubicon and Unlimited
- Fits 1984 to 2001 Jeep Cherokee XJ
- Fits 1986 to 1992 Jeep Comanche
- Fits 1993 to 1998 Jeep Grand Wagoneer ZJ
- Adjustable 3.5-4.5 Inches Lift
- Silver
SKU: RE1600 -
Track Bar
Rubicon Express Front Track Bar 07-18 JK/JKU W/Dana 60 – RE1682
JK W/Dana Front Track Bar. Correct alignment and handling problems on lifted vehicles With our front adjustable chromoly track bars. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited With Dana 60 front axle
- 2 and 4-door models
- For Dana 60 Axle
SKU: RE1682 -
Track Bar Mounting Brackets
Rubicon Express Front Track Bar Bracket 07-18 JK/JKU – RE1675
JK Front Track Bar Bracket. Our brackets are laser cut from 3/16 inch cold rolled steel and then CNC formed for unmatched precision and strength. These brackets are required for cleanly mounting a custom axle in your rig.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
SKU: RE1675 -
Track Bar
Rubicon Express Front Track Bar Extreme Duty 07-18 JK/JKU W/Dana 60 – RE1680
JK Front Track Bar. Correct alignment and handling problems on lifted vehicles With our front adjustable chromoly track bars. Allows for more wheel travel than the stock unit and features a replaceable rod end for easier future maintenance. This track bar cannot be mounted onto the Jeep without using #R/ERE1675 front track bar bracket.
Details:- Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Extreme duty
- Must be used With RE1675 track bar bracket
SKU: RE1680 -
Fuel Tank Skid Plate
Rubicon Express Fuel Tank Skid Plate 07-18 JK 2 Dr – REA1015
JK Fuel Tank Skid Plate. Rubicon Express has everything you need to protect the vulnerable undercarriage of your Jeep Wrangler from front to back, With skid plates for your engine oil pan, transfer case, and fuel tank. All of the skidplates are CNC laser cut from 3/16-inch steel to withstand even the worst abuse, and are designed to mount up tight to the drivetrain to maximize ground clearance. The modular protection system allows you to add skidplates as your needs and budget allow without any concerns about compatibility.
Details:- Fits 2007 to 2018 JK Wrangler and Rubicon
- 2-door models
- Black powder coat
- High, tight mounting methods to provide protection while not affecting clearance
- 3/16 steel construction for ultimate protection
- No cutting or modification to existing components
- Uses existing hardware/fasteners
- Designed to reduce obstacle hang ups and improve slide over terrain
- Precision CNC laser cut and formed for an unrivaled fit and finish
- Designed to work With all rubicon express suspension systems
SKU: REA1015 -
Sway Bar End Links
Rubicon Express Gen II Axel Bullet Assembly – RE1187
Gen II Axle Bullet Assemblies are designed to replace damaged or worn-out bullets used in your Rubicon Express quick-disconnect sway bar end link system. Theyll easily bolt into place with modifications and are pre-drilled to accept the quick-release pin.
Details:- Gen II Axle end Bullet
- Made from Steel
- Sold As Each
SKU: RE1187
