Rough Coutry
Showing 65–96 of 206 results
-
Drive Shaft
Rough Coutry CV Rear Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts 5072.1
This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5-6-inch short arm suspension lifts or 2.5-6-inch long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. Tom Woods designed this to accept standard “off the shelf” mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
Rough Country’s CV Rear Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts – 5072.1
SKU: 5072.1 -
Drive Shaft
Rough Coutry CV Rear Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts 5073.1
This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5-6-inch short arm suspension lifts or 2.5-6-inch long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. Tom Woods designed this to accept standard “off the shelf” mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
Rough Country’s CV Rear Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts – 5073.1
SKU: 5073.1 -
Drive Shaft
Rough Coutry CV Rear Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts 5097.1
This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5-6-inch short arm suspension lifts or 2.5-6-inch long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. Tom Woods designed this to accept standard “off the shelf” mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
Rough Country’s CV Rear Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts – 5097.1
SKU: 5097.1 -
Drive Shaft
Rough Coutry CV Rear Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts 5099.1
This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5-6-inch short arm suspension lifts or 2.5-6-inch long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. Tom Woods designed this to accept standard “off the shelf” mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
Rough Country’s CV Rear Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts – 5099.1
SKU: 5099.1 -
-
Ring & Pinion
Rough Coutry Dana 30 4.56 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 53045611
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Kits. Our durable aftermarket gear upgrade kits breathe new life into your lifted Jeep, especially when equipped with larger aftermarket tires.
Ring and Pinion Gears help your vehicle take power supplied from the driveshaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Rough Country’s smooth-finished gears run cooler and quieter than other solutions, while our durable construction and affordable price makes Rough Country an easy choice for upgrading your gears! Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Dana 30 4.56 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) – 53045611
SKU: 53045611 -
Ring & Pinion
Rough Coutry Dana 30 4.88 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 53048811
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Kits. Our durable aftermarket gear upgrade kits breathe new life into your lifted Jeep, especially when equipped with larger aftermarket tires.
Ring and Pinion Gears help your vehicle take power supplied from the driveshaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Rough Country’s smooth-finished gears run cooler and quieter than other solutions, while our durable construction and affordable price makes Rough Country an easy choice for upgrading your gears! Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Dana 30 4.88 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) – 53048811
SKU: 53048811 -
Ring & Pinion
Rough Coutry Dana 30 5.13 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 53051311
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Kits. Our durable aftermarket gear upgrade kits breathe new life into your lifted Jeep, especially when equipped with larger aftermarket tires.
Ring and Pinion Gears help your vehicle take power supplied from the driveshaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Rough Country’s smooth-finished gears run cooler and quieter than other solutions, while our durable construction and affordable price makes Rough Country an easy choice for upgrading your gears! Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Dana 30 5.13 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) – 53051311
SKU: 53051311 -
Ring & Pinion
Rough Coutry Dana 30 Ring & Pinion Gear Set Master Install Kit (Wrangler JK / JKU) 53000011
Ring & PinionRough Coutry Dana 30 Ring & Pinion Gear Set Master Install Kit (Wrangler JK / JKU) 53000011
Install your Rough Country Gears easily and accurately with Rough Country’s Master Overhaul Installation Kit. This all-inclusive install kit features everything you need to easily install your new ring & pinion gears with confidence.
Rough Countrys Master Install kit saves you the time and hassle of tracking down the components you need to install a new ring and pinion into your differential. This install kit makes it easy to install the correct shim amount, and mark up the gears for a perfect mesh.
This kit includes a set of carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kit, pinion nut, crush sleeve (select models), oil baffle and slingers (select models), thread locking compound, marking compound, and brush and gasket sealing compound.
Rough Country’s Dana 30 Ring & Pinion Gear Set Master Install Kit (Wrangler JK / JKU) – 53000011
SKU: 53000011 -
Ring & Pinion
Rough Coutry Dana 44 4.88 Ratio Ring & Pinion Gear Set (Wrangler TJ / LJ) 54448803
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Kits. Our durable aftermarket gear upgrade kits breathe new life into your lifted Jeep, especially when equipped with larger aftermarket tires.
Ring and Pinion Gears help your vehicle take power supplied from the driveshaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Rough Country’s smooth-finished gears run cooler and quieter than other solutions, while our durable construction and affordable price makes Rough Country an easy choice for upgrading your gears! Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Dana 44 4.88 Ratio Ring & Pinion Gear Set (Wrangler TJ / LJ) – 54448803
SKU: 54448803 -
Ring & Pinion
Rough Coutry Dana 44 Front 5.13 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54451312
Ring & PinionRough Coutry Dana 44 Front 5.13 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54451312
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Kits. Our durable aftermarket gear upgrade kits breathe new life into your lifted Jeep, especially when equipped with larger aftermarket tires.
Ring and Pinion Gears help your vehicle take power supplied from the driveshaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Rough Country’s smooth-finished gears run cooler and quieter than other solutions, while our durable construction and affordable price makes Rough Country an easy choice for upgrading your gears! Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Dana 44 Front 5.13 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) – 54451312
SKU: 54451312 -
Ring & Pinion
Rough Coutry Dana 44 Front 5.38 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54453812
Ring & PinionRough Coutry Dana 44 Front 5.38 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54453812
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Kits. Our durable aftermarket gear upgrade kits breathe new life into your lifted Jeep, especially when equipped with larger aftermarket tires.
Ring and Pinion Gears help your vehicle take power supplied from the driveshaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Rough Country’s smooth-finished gears run cooler and quieter than other solutions, while our durable construction and affordable price makes Rough Country an easy choice for upgrading your gears! Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Dana 44 Front 5.38 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) – 54453812
SKU: 54453812 -
Ring & Pinion
Rough Coutry Dana 44 Rear 4.56 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54445622
Ring & PinionRough Coutry Dana 44 Rear 4.56 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54445622
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Kits. Our durable aftermarket gear upgrade kits breathe new life into your lifted Jeep, especially when equipped with larger aftermarket tires.
Ring and Pinion Gears help your vehicle take power supplied from the driveshaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Rough Country’s smooth-finished gears run cooler and quieter than other solutions, while our durable construction and affordable price makes Rough Country an easy choice for upgrading your gears! Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Dana 44 Rear 4.56 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) – 54445622
SKU: 54445622 -
Ring & Pinion
Rough Coutry Dana 44 Rear 4.88 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54448822
Ring & PinionRough Coutry Dana 44 Rear 4.88 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54448822
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Kits. Our durable aftermarket gear upgrade kits breathe new life into your lifted Jeep, especially when equipped with larger aftermarket tires.
Ring and Pinion Gears help your vehicle take power supplied from the driveshaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Rough Country’s smooth-finished gears run cooler and quieter than other solutions, while our durable construction and affordable price makes Rough Country an easy choice for upgrading your gears! Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Dana 44 Rear 4.88 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) – 54448822
SKU: 54448822 -
Ring & Pinion
Rough Coutry Dana 44 Rear 5.13 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54451322
Ring & PinionRough Coutry Dana 44 Rear 5.13 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54451322
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Kits. Our durable aftermarket gear upgrade kits breathe new life into your lifted Jeep, especially when equipped with larger aftermarket tires.
Ring and Pinion Gears help your vehicle take power supplied from the driveshaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Rough Country’s smooth-finished gears run cooler and quieter than other solutions, while our durable construction and affordable price makes Rough Country an easy choice for upgrading your gears! Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Dana 44 Rear 5.13 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) – 54451322
SKU: 54451322 -
Ring & Pinion
Rough Coutry Dana 44 Rear 5.38 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54453822
Ring & PinionRough Coutry Dana 44 Rear 5.38 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) 54453822
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Kits. Our durable aftermarket gear upgrade kits breathe new life into your lifted Jeep, especially when equipped with larger aftermarket tires.
Ring and Pinion Gears help your vehicle take power supplied from the driveshaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Rough Country’s smooth-finished gears run cooler and quieter than other solutions, while our durable construction and affordable price makes Rough Country an easy choice for upgrading your gears! Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Dana 44 Rear 5.38 Ratio Ring & Pinion Gear Set (Wrangler JK / JKU) – 54453822
SKU: 54453822 -
Ring & Pinion
Rough Coutry Dana 44 Rear Ring & Pinion Gear Set Master Install Kit (Wrangler JK / JKU) 54400031
Ring & PinionRough Coutry Dana 44 Rear Ring & Pinion Gear Set Master Install Kit (Wrangler JK / JKU) 54400031
Install your Rough Country Gears easily and accurately with Rough Country’s Master Overhaul Installation Kit. This all-inclusive install kit features everything you need to easily install your new ring & pinion gears with confidence.
Rough Countrys Master Install kit saves you the time and hassle of tracking down the components you need to install a new ring and pinion into your differential. This install kit makes it easy to install the correct shim amount, and mark up the gears for a perfect mesh.
This kit includes a set of carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kit, pinion nut, crush sleeve (select models), oil baffle and slingers (select models), thread locking compound, marking compound, and brush and gasket sealing compound.
Rough Country’s Dana 44 Rear Ring & Pinion Gear Set Master Install Kit (Wrangler JK / JKU) – 54400031
SKU: 54400031 -
Jeep Steps
Rough Coutry DS2 Drop Steps (2-Door JK Models) SDS071753
Gain incredible style and easier access to your truck with Rough Countrys DS2 Drop Steps. These stylish cab-length steps offer a unique look for your vehicle, with two integrated drop steps to help you easily climb into your cab.
Each integrated step is fabricated for strength and durability, and features a stamped tread and RC logo for a one-of-a-kind look and feel.
These steel steps offer unrelenting reliability, powdercoated black to resist corrosion for a long life of great looks.Each step features a set of mounting brackets with a half-inch of adjustability to allow you to mount them closer or further from the body for the look and accessibility you prefer. Rough Country Steps include a Lifetime Replacement Warranty!
Rough Country’s DS2 Drop Steps (2-Door JK Models) – SDS071753
SKU: SDS071753 -
Jeep Steps
Rough Coutry DS2 Drop Steps (4-Door JKU Models) SDS071772
Gain incredible style and easier access to your truck with Rough Countrys DS2 Drop Steps. These stylish cab-length steps offer a unique look for your vehicle, with two integrated drop steps to help you easily climb into your cab.
Each integrated step is fabricated for strength and durability, and features a stamped tread and RC logo for a one-of-a-kind look and feel.
These steel steps offer unrelenting reliability, powdercoated black to resist corrosion for a long life of great looks.Each step features a set of mounting brackets with a half-inch of adjustability to allow you to mount them closer or further from the body for the look and accessibility you prefer. Rough Country Steps include a Lifetime Replacement Warranty!
Rough Country’s DS2 Drop Steps (4-Door JKU Models) – SDS071772
SKU: SDS071772 -
Steering Stabilizer
Rough Coutry Dual Steering Stabilizer for 2-6-inch Lifts 87349
Steering stabilizers are designed to restrain “bump steer” and front end vibration, giving added life to tires, ball joints, and other steering components.
Rough Country’s Dual Steering Stabilizer for 2-6-inch Lifts – 87349
SKU: 87349 -
-
Exhaust
Rough Coutry Exhaust Loop Relocation Pipe 1041
New model JK’s saw a change in the exhaust design. The new factory location leaves very little clearance for the larger Long Arms and can make contact. Rough Country’s new Loop Exhaust Kit allows new Wranglers to experience the power of our Long Arm Kit by offering a very clean work around that allows maximum flex and keeps everything cleanly tucked out of the way. This kit is included in all 2012 and newer Rough Country JK Long Arm Kits.
Rough Country’s Exhaust Loop Relocation Pipe – 1041
SKU: 1041 -
Exhaust
Rough Coutry Exhaust Y-Pipe Assembly 1040
Stock exhaust pipes on JK’s lifted more than 2-inches can make contact with the front drive shaft during downward suspension travel. Our aftermarket Y-pipe eliminates this problem by replacing part of your exhaust system with a design more suitable for Off-Road use. Once installed, this kit offers more clearance between the exhaust and front drive shaft protecting both crucial components and giving you more peace of mind. You have enough to worry about on the trails, your exhaust shouldn’t be one of them.
Rough Country’s Exhaust Y-Pipe Assembly – 1040
SKU: 1040 -
Ring & Pinion
Rough Coutry Front & Rear D44 5.13 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) 414444513
Ring & PinionRough Coutry Front & Rear D44 5.13 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) 414444513
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Combo kits. Our durable aftermarket gear upgrade combo kits come with everything you need to regear the front and rear of your vehicle and breathe new life into your lifted Jeep.
Ring and Pinion Gears help your vehicle take power supplied from the drive shaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Each kit includes a full set of front and rear ring and pinion sets along with front and rear master install kits, including: carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kits, pinion nuts, crush sleeves (select models) oil baffles and slingers (select models), thread locking compound, marking compound, brush and gasket sealing compound – everything you need in one, easy kit!
Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Front & Rear D44 5.13 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) – 414444513
SKU: 414444513 -
Ring & Pinion
Rough Coutry Front & Rear D44 5.38 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) 414444538
Ring & PinionRough Coutry Front & Rear D44 5.38 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) 414444538
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Combo kits. Our durable aftermarket gear upgrade combo kits come with everything you need to regear the front and rear of your vehicle and breathe new life into your lifted Jeep.
Ring and Pinion Gears help your vehicle take power supplied from the drive shaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Each kit includes a full set of front and rear ring and pinion sets along with front and rear master install kits, including: carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kits, pinion nuts, crush sleeves (select models) oil baffles and slingers (select models), thread locking compound, marking compound, brush and gasket sealing compound – everything you need in one, easy kit!
Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Front & Rear D44 5.38 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) – 414444538
SKU: 414444538 -
Inner Fenders
Rough Coutry Front & Rear Steel Inner Fenders / Fender Liners Combo 10511
Clean up the look of your inner fenders when using aftermarket flares with Rough Countrys JK Front and Rear Inner Fender Liners. These eye-catching inner fender upgrades help protect sensitive areas from dust, mud, and debris, and can be easily installed in no-time flat!
Aftermarket fenders are a huge improvement for most Jeeps wanting to get the best clearance and articulation possible, but when removing the stock fenders many people also remove the stock fender liners. Regain protection in this crucial area and protect your engine bay from the elements with Rough Countrys innovative Front and Rear Inner Fender Liners. With a unique 3-piece construction, these liners cover more areas than other liners on the market, giving more protection to your engine bay and body panels. Each Rough Country liner features a corrosion-resistant powder coat for long-lasting durability. Additionally, these liners mount firmly to the body for quiet operation, free of rattling or vibration noise.
The solid-steel, angular design with RC and Rough Country logo cutouts gives an aggressive look to this now more visible area on your JK. An included, removable logo plate for the front liner can be custom painted to any color you wish for a pop of extra color, while the rear liner lines up perfectly to show the painted body color behind it. Rough Country Inner Fender Liners feature a bolt-on installation process with minor drilling for an easy upgrade you can do with common tools in a home garage. Includes Rough Countrys Lifetime Replacement Warranty.
Rough Country’s Front & Rear Steel Inner Fenders / Fender Liners Combo – 10511
SKU: 10511 -
Ring & Pinion
Rough Coutry Front D30 & Rear D44 4.56 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044456
Ring & PinionRough Coutry Front D30 & Rear D44 4.56 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044456
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Combo kits. Our durable aftermarket gear upgrade combo kits come with everything you need to regear the front and rear of your vehicle and breathe new life into your lifted Jeep.
Ring and Pinion Gears help your vehicle take power supplied from the drive shaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Each kit includes a full set of front and rear ring and pinion sets along with front and rear master install kits, including: carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kits, pinion nuts, crush sleeves (select models) oil baffles and slingers (select models), thread locking compound, marking compound, brush and gasket sealing compound – everything you need in one, easy kit!
Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Front D30 & Rear D44 4.56 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) – 403044456
SKU: 403044456 -
Ring & Pinion
Rough Coutry Front D30 & Rear D44 4.88 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044488
Ring & PinionRough Coutry Front D30 & Rear D44 4.88 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044488
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Combo kits. Our durable aftermarket gear upgrade combo kits come with everything you need to regear the front and rear of your vehicle and breathe new life into your lifted Jeep.
Ring and Pinion Gears help your vehicle take power supplied from the drive shaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Each kit includes a full set of front and rear ring and pinion sets along with front and rear master install kits, including: carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kits, pinion nuts, crush sleeves (select models) oil baffles and slingers (select models), thread locking compound, marking compound, brush and gasket sealing compound – everything you need in one, easy kit!
Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Front D30 & Rear D44 4.88 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) – 403044488
SKU: 403044488 -
Ring & Pinion
Rough Coutry Front D30 & Rear D44 5.13 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044513
Ring & PinionRough Coutry Front D30 & Rear D44 5.13 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044513
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Combo kits. Our durable aftermarket gear upgrade combo kits come with everything you need to regear the front and rear of your vehicle and breathe new life into your lifted Jeep.
Ring and Pinion Gears help your vehicle take power supplied from the drive shaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Each kit includes a full set of front and rear ring and pinion sets along with front and rear master install kits, including: carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kits, pinion nuts, crush sleeves (select models) oil baffles and slingers (select models), thread locking compound, marking compound, brush and gasket sealing compound – everything you need in one, easy kit!
Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Front D30 & Rear D44 5.13 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) – 403044513
SKU: 403044513 -
Differential Skid Plate
Rough Coutry Front Dana 30 Differential Skid Plate 797
This durable, 1/4-inch plate steel Skid offers unbeatable protection for the underside of your Jeep. Go further off-road and free yourself from worry with this easy-to-install skid plate. Keep your Diff in top shape, even on the roughest terrain, while reinforcing the existing differential housing!
Rough Country’s Front Dana 30 Differential Skid Plate – 797
SKU: 797
