G2 Axle and Gear

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2in. 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007 to 2016 Rock Jock Dana 60 Rear High Pinion Big Bearing Axle Assembly
• 5.13 Gear Ratio
• Detroit True Trac
• Currie 35 Spline Axle Shafts
• Dual Bolt Pattern 5 on 5 and 5 on 5.5
• Set 80 Wheel Bearings
• Accepts Factory Brakes And Wheel Sensors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2in. 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007 to 2016 Rock Jock Dana 60 Rear High Pinion Big Bearing Axle Assembly
• 5.38 Gear Ratio
• Detroit Locker
• Currie 35 Spline Axle Shafts
• Dual Bolt Pattern 5 on 5 and 5 on 5.5
• Set 80 Wheel Bearings
• Accepts Factory Brakes And Wheel Sensors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2inch 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007-2014 JK Rock Jock Dana 60 Front Axle Assembly
• 4.10 Gear Ratio
• ARB Air Locker
• Currie 35 Spline Axle Shafts
• 1480 Axle U Joints
• 5 on 5 1/2 Bolt Pattern
• Accepts Factory brake calipers And Wheel Sensors
• 13 Inch Vented Rotors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• 1 Ton Steering Knuckles With high steer arm
• 1 Ton ball joints
• locking hubs sold separately
• Air Compressor sold separately
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2inch 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007-2014 JK Rock Jock Dana 60 Front Axle Assembly
• 4.10 Gear Ratio
• Eaton E Locker
• Currie 35 Spline Axle Shafts
• 1480 Axle U Joints
• 5 on 5 1/2 Bolt Pattern
• Accepts Factory brake calipers And Wheel Sensors
• 13 Inch Vented Rotors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• 1 Ton Steering Knuckles With high steer arm
• 1 Ton ball joints
• locking hubs sold separately
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2inch 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007 to 2016 Rock Jock Dana 60 Front Axle Assembly
• 4.56 Gear Ratio
• Detroit True Trac
• Currie 35 Spline Axle Shafts
• 1480 Axle U Joints
• 5 on 5 1/2 Bolt Pattern
• Accepts Factory brake calipers And Wheel Sensors
• 13 Inch Vented Rotors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• 1 Ton Steering Knuckles With high steer arm
• 1 Ton ball joints
• Locking hubs sold separately
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2inch 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007 to 2016 Rock Jock Dana 60 Front Axle Assembly
• 4.88 Gear Ratio
• Detroit Locker
• Currie 35 Spline Axle Shafts
• 1480 Axle U Joints
• 5 on 5 1/2 Bolt Pattern
• Accepts Factory brake calipers And Wheel Sensors
• 13 Inch Vented Rotors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• 1 Ton Steering Knuckles With high steer arm
• 1 Ton ball joints
• locking hubs sold separately
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2inch 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007 to 2016 Rock Jock Dana 60 Front Axle Assembly
• 5.13 Gear Ratio
• ARB Air Locker
• Currie 35 Spline Axle Shafts
• 1480 Axle U Joints
• 5 on 5 1/2 Bolt Pattern
• Accepts Factory brake calipers And Wheel Sensors
• 13 Inch Vented Rotors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• 1 Ton Steering Knuckles With high steer arm
• 1 Ton ball joints
• locking hubs sold separately
• Air Compressor sold separately
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2inch 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007 to 2016 Rock Jock Dana 60 Front Axle Assembly
• 5.13 Gear Ratio
• Eaton E Locker
• Currie 35 Spline Axle Shafts
• 1480 Axle U Joints
• 5 on 5 1/2 Bolt Pattern
• Accepts Factory brake calipers And Wheel Sensors
• 13 Inch Vented Rotors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• 1 Ton Steering Knuckles With high steer arm
• 1 Ton ball joints
• locking hubs sold separately
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2inch 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007 to 2016 Rock Jock Dana 60 Front Axle Assembly
• 5.38 Gear Ratio
• Detroit True Trac
• Currie 35 Spline Axle Shafts
• 1480 Axle U Joints
• 5 on 5 1/2 Bolt Pattern
• Accepts Factory brake calipers And Wheel Sensors
• 13 Inch Vented Rotors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• 1 Ton Steering Knuckles With high steer arm
• 1 Ton ball joints
• locking hubs sold separately
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2in. 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007-2014 JK Rock Jock Dana 60 Rear High Pinion Axle Assembly
• 4.10 Gear Ratio
• Detroit Locker
• Currie 35 Spline Axle Shafts
• Dual Bolt Pattern 5 on 5 and 5 on 5.5
• Accepts Factory Brakes And Wheel Sensors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2in. 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007 to 2016 Rock Jock Dana 60 Rear High Pinion Axle Assembly
• 4.56 Gear Ratio
• ARB Air Locker
• Currie 35 Spline Axle Shafts
• Dual Bolt Pattern 5 on 5 and 5 on 5.5
• Accepts Factory Brakes And Wheel Sensors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• Air compressor sold separately
• May Require Driveshaft Modifications