G2 Axle and Gear

G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:

• JK Rear with 5.38 gear ratio and ARB Air Locker
• Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
• USA Made 4340 Chromalloy 35 spline Placer axle shafts
• Factory style flange pinion yoke
• Integrated skid plates on lower control arm mounts
• Heavy-duty 1/4in. laser cut brackets
• Heavy duty 3in. diameter 5/16in. DOM tubes
• Reinforcing ribs for added strength and protection
• Heavy duty forged bearing caps
• Spanner nuts for backlash adjustment
• Heat-treated aluminum diff cover with cooling fins

G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:

• JK Rear with 5.13 gear ratio and ARB Air Locker
• Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
• USA Made 4340 Chromalloy 35 spline Placer axle shafts
• Factory style flange pinion yoke
• Integrated skid plates on lower control arm mounts
• Heavy-duty 1/4in. laser cut brackets
• Heavy duty 3in. diameter 5/16in. DOM tubes
• Reinforcing ribs for added strength and protection
• Uses metric Rubicon style carrier bearings
• Heavy duty forged bearing caps
• Spanner nuts for backlash adjustment
• Heat-treated aluminum diff cover with cooling fins

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2inch 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007-2014 JK Rock Jock Dana 60 Rear High Pinion Big Bearing Axle Assembly
• 4.10 Gear Ratio
• ARB Air Locker
• Currie 35 Spline Axle Shafts
• Dual Bolt Pattern 5 on 5 and 5 on 5.5
• Set 80 Wheel Bearings
• Accepts Factory Brakes And Wheel Sensors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• Air compressor sold separately
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2in. 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007-2014 JK Rock Jock Dana 60 Rear High Pinion Big Bearing Axle Assembly
• 4.10 Gear Ratio
• Eaton E Locker
• Currie 35 Spline Axle Shafts
• Dual Bolt Pattern 5 on 5 and 5 on 5.5
• Set 80 Wheel Bearings
• Accepts Factory Brakes And Wheel Sensors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2in. 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007 to 2016 Rock Jock Dana 60 Rear High Pinion Big Bearing Axle Assembly
• 4.56 Gear Ratio
• Detroit True Trac
• Currie 35 Spline Axle Shafts
• Dual Bolt Pattern 5 on 5 and 5 on 5.5
• Set 80 Wheel Bearings
• Accepts Factory Brakes And Wheel Sensors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2in. 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007 to 2016 Rock Jock Dana 60 Rear High Pinion Big Bearing Axle Assembly
• 4.88 Gear Ratio
• Detroit Locker
• Currie 35 Spline Axle Shafts
• Dual Bolt Pattern 5 on 5 and 5 on 5.5
• Set 80 Wheel Bearings
• Accepts Factory Brakes And Wheel Sensors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• May Require Driveshaft Modifications

If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2in. 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:

• 2007 to 2016 Rock Jock Dana 60 Rear High Pinion Big Bearing Axle Assembly
• 5.13 Gear Ratio
• ARB Air Locker
• Currie 35 Spline Axle Shafts
• Dual Bolt Pattern 5 on 5 and 5 on 5.5
• Set 80 Wheel Bearings
• Accepts Factory Brakes And Wheel Sensors
• 1350 Series Yoke
• Ductile Iron Housing Center Section
• AR 400 Heat Treated Bottom Skid Plate
• 3 inch D.O.M. Steel Tubes
• Air compressor sold separately
• May Require Driveshaft Modifications