G2 Axle and Gear
Showing 65–96 of 208 results
-
Axle Assembly
G2 Core 44 Front Axle Assembly No Caster 5.38 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFS538AP5
Axle AssemblyG2 Core 44 Front Axle Assembly No Caster 5.38 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFS538AP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 Placer Gold USA made 35 spline Chromalloy axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 5.38 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- Standard axle caster for 0-4 inch lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFS538AP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly No Caster 5.38 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFS538MP5
Axle AssemblyG2 Core 44 Front Axle Assembly No Caster 5.38 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFS538MP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 Placer Gold USA made 35 spline Chromalloy axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 5.38 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- Standard axle caster for 0-4 inch lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFS538MP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly W/Caster 4.56 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFL456AP5
Axle AssemblyG2 Core 44 Front Axle Assembly W/Caster 4.56 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFL456AP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6in. and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 4.56 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3 Degrees etra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFL456AP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly W/Caster 4.56 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFL456MP5
Axle AssemblyG2 Core 44 Front Axle Assembly W/Caster 4.56 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFL456MP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6in. and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 4.56 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3 Degrees extra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
SKU: C4JMFL456MP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly W/Caster 4.88 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFL488AP5
Axle AssemblyG2 Core 44 Front Axle Assembly W/Caster 4.88 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFL488AP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6in. and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 4.88 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3 Degrees extra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFL488AP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly W/Caster 4.88 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFL488MP5
Axle AssemblyG2 Core 44 Front Axle Assembly W/Caster 4.88 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFL488MP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6in. and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 4.88 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3 Degrees extra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFL488MP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly W/Caster 5.13 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFL513AP5
Axle AssemblyG2 Core 44 Front Axle Assembly W/Caster 5.13 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFL513AP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6in. and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 5.13 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3 Degrees extra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFL513AP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly W/Caster 5.13 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFL513MP5
Axle AssemblyG2 Core 44 Front Axle Assembly W/Caster 5.13 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFL513MP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6in. and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 5.13 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3 Degrees extra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFL513MP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly W/Caster 5.38 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFL538AP5
Axle AssemblyG2 Core 44 Front Axle Assembly W/Caster 5.38 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFL538AP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6in. and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 5.38 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3 Degrees extra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFL538AP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly W/Caster 5.38 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFL538MP5
Axle AssemblyG2 Core 44 Front Axle Assembly W/Caster 5.38 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFL538MP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6in. and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 5.38 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3Degrees extra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFL538MP5 -
Axle Assembly
G2 Core 44 Rear 4.56 30 Placer Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456AP0
Axle AssemblyG2 Core 44 Rear 4.56 30 Placer Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456AP0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 30 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR456AP0 -
Axle Assembly
G2 Core 44 Rear 4.56 30 Placer Spl W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JSR456MP0
Axle AssemblyG2 Core 44 Rear 4.56 30 Placer Spl W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JSR456MP0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 30 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR456MP0 -
Axle Assembly
G2 Core 44 Rear 4.56 30 Placer Spl W/Detroit Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456DP0
Axle AssemblyG2 Core 44 Rear 4.56 30 Placer Spl W/Detroit Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456DP0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and Detroit Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 30 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR456DP0 -
Axle Assembly
G2 Core 44 Rear 4.56 30 Placer Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JSR456TP0
Axle AssemblyG2 Core 44 Rear 4.56 30 Placer Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JSR456TP0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and Detroit True Trac
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 30 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR456TP0 -
Axle Assembly
G2 Core 44 Rear 4.56 30 Placer Spl W/Eaton E Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456EP0
Axle AssemblyG2 Core 44 Rear 4.56 30 Placer Spl W/Eaton E Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456EP0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and Eaton E-Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 30 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR456EP0 -
Axle Assembly
G2 Core 44 Rear 4.56 30 Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456AC0
Axle AssemblyG2 Core 44 Rear 4.56 30 Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456AC0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- 4340 Chromalloy 30 spline axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
SKU: C4JSR456AC0 -
Axle Assembly
G2 Core 44 Rear 4.56 30 Spl W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JSR456MC0
Axle AssemblyG2 Core 44 Rear 4.56 30 Spl W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JSR456MC0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- 4340 Chromalloy 30 spline axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR456MC0 -
Axle Assembly
G2 Core 44 Rear 4.56 30 Spl W/Detroit Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456DC0
Axle AssemblyG2 Core 44 Rear 4.56 30 Spl W/Detroit Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456DC0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and Detroit Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- 4340 Chromalloy 30 spline axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR456DC0 -
Axle Assembly
G2 Core 44 Rear 4.56 30 Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JSR456TC0
Axle AssemblyG2 Core 44 Rear 4.56 30 Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JSR456TC0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and Detroit True Trac
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- 4340 Chromalloy 30 spline axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR456TC0 -
Axle Assembly
G2 Core 44 Rear 4.56 30 Spl W/Eaton E Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456EC0
Axle AssemblyG2 Core 44 Rear 4.56 30 Spl W/Eaton E Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456EC0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and Eaton E-Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- 4340 Chromalloy 30 spline axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR456EC0 -
Axle Assembly
G2 Core 44 Rear 4.56 32 Placer Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JMR456TP2
Axle AssemblyG2 Core 44 Rear 4.56 32 Placer Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JMR456TP2
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and Detroit True Trac
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 32 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMR456TP2 -
Axle Assembly
G2 Core 44 Rear 4.56 32 Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JMR456TC2
Axle AssemblyG2 Core 44 Rear 4.56 32 Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JMR456TC2
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available.
Details:- JK Rear with 4.56 gear ratio and Detroit Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- 4340 Chromalloy 32 spline axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMR456TC2 -
Axle Assembly
G2 Core 44 Rear 4.56 35 Placer Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456AP5
Axle AssemblyG2 Core 44 Rear 4.56 35 Placer Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR456AP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 35 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR456AP5 -
Axle Assembly
G2 Core 44 Rear 4.56 35 Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMR456AP5
Axle AssemblyG2 Core 44 Rear 4.56 35 Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMR456AP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 35 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMR456AP5 -
Axle Assembly
G2 Core 44 Rear 4.56 35 Spl W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMR456MP5
Axle AssemblyG2 Core 44 Rear 4.56 35 Spl W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMR456MP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.56 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 35 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMR456MP5 -
Axle Assembly
G2 Core 44 Rear 4.88 30 Placer Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR488AP0
Axle AssemblyG2 Core 44 Rear 4.88 30 Placer Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR488AP0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.88 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 30 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR488AP0 -
Axle Assembly
G2 Core 44 Rear 4.88 30 Placer Spl W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JSR488MP0
Axle AssemblyG2 Core 44 Rear 4.88 30 Placer Spl W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JSR488MP0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.88 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 30 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR488MP0 -
Axle Assembly
G2 Core 44 Rear 4.88 30 Placer Spl W/Detroit Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR488DP0
Axle AssemblyG2 Core 44 Rear 4.88 30 Placer Spl W/Detroit Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR488DP0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.88 gear ratio and Detroit Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 30 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR488DP0 -
Axle Assembly
G2 Core 44 Rear 4.88 30 Placer Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JSR488TP0
Axle AssemblyG2 Core 44 Rear 4.88 30 Placer Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JSR488TP0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.88 gear ratio and Detroit True Trac
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 30 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR488TP0 -
Axle Assembly
G2 Core 44 Rear 4.88 30 Placer Spl W/Eaton E Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR488EP0
Axle AssemblyG2 Core 44 Rear 4.88 30 Placer Spl W/Eaton E Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR488EP0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.88 gear ratio and Eaton E-Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 30 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR488EP0 -
Axle Assembly
G2 Core 44 Rear 4.88 30 Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR488AC0
Axle AssemblyG2 Core 44 Rear 4.88 30 Spl W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JSR488AC0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.88 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- 4340 Chromalloy 30 spline axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR488AC0 -
Axle Assembly
G2 Core 44 Rear 4.88 30 Spl W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JSR488MC0
Axle AssemblyG2 Core 44 Rear 4.88 30 Spl W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JSR488MC0
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available
Details:- JK Rear with 4.88 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- 4340 Chromalloy 30 spline axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JSR488MC0