G2 Axle and Gear
Showing 1–32 of 208 results
-
Axle Shaft Snap Ring
Axle U Joint Full Circle Snap Ring Dana 44/30 W/5-760X Series U Joint G2 Axle and Gear 1400-118PP
Axle Shaft Snap RingAxle U Joint Full Circle Snap Ring Dana 44/30 W/5-760X Series U Joint G2 Axle and Gear 1400-118PP
No more thrown axle u-joint caps when used with full circle snap rings. These snap rings encumpis the u-joint caps all the way around for positive cap retension unlike the factory C style clips.
Details:- Fur Use With 5-760x Series U-Joint
- For Use With Aftermarket Axle Shafts
- Factory Shafts Will Require Machining
- Will WorkWith GM 10 Bolt Axles
- Single Snap Ring Only Qty 4 Required To Install 1 U Joint
SKU: 1400-118PP -
Axle Shaft Snap Ring
Axle U Joint Full Circle Snap Ring Dana 60 W/5-806X Style U Joint G2 Axle and Gear 1400-137ZD
Axle Shaft Snap RingAxle U Joint Full Circle Snap Ring Dana 60 W/5-806X Style U Joint G2 Axle and Gear 1400-137ZD
Prevent your u joint clips from being lost resulting in damaged axle shafts by replacing your factory style C type clips with these full circle snap rings for piece of mind on the highway and the trail.
Details:- Full Circle Snap Ring For 5-806X Style U Joints
- For Use With Most Aftermarket Axle Shafts
- Factory Axles Will Require Minor Machine Work For These Snap Rings To Clear
- Fits Cup Size 1.375in.
- Single Snap Ring Only Qty 4 Required To Install 1 U Joint
SKU: 1400-137ZD -
Gussets
C Gusset Kit Dana 30/44 Front Axle 07-Pres Wrangler JK/JK Unlimited G2 Axle and Gear 68-2051-2
GussetsC Gusset Kit Dana 30/44 Front Axle 07-Pres Wrangler JK/JK Unlimited G2 Axle and Gear 68-2051-2
The all new G2 Heavy Duty JK Dana 30 and Dana 44 Inner C Gussets give your axle the strength it needs to tackle the hardest trails. Formed from laser cut 1/4in. thick steel, these gussets are designed to give a precision fit, ensuring trouble-free installation. Kit includes Heavy Duty Lower Control Arm Skids. Welding is required. Professional welding skills are strongly recommended.
Details:- Fits 2007 to 2016 JK Dana 30 and Dana 44 front axle
- 2 and 4-door Models
- Unpainted
- Heavy-duty steel construction
- Welding required
SKU: 68-2051-2 -
Misc Tools
Clamshell Bearing Puller G2 Axle and Gear 80-BRGPLLR
G2 Bearing puller is designed specifically for differential work. This clamshell type bearing puller makes pulling bearings easier and faster while reducing the risk of damaging the bearing cage like two jaw pullers. This puller is perfect for fast and easy shim changes.
Details:- G2 Professional Clamshell Bearing Puller
- Small, Medium and large Clamshell
- Adjustable Pilot
- Spacer Sleeve
- Handy Carrying and Storage Tray
SKU: 80-BRGPLLR -
Axle Housing
Core 44 Front Bare Axle Housing W/Diff Cover 97-06 Wrangler TJ/LJ G2 Axle and Gear 67-2051TJF
Axle HousingCore 44 Front Bare Axle Housing W/Diff Cover 97-06 Wrangler TJ/LJ G2 Axle and Gear 67-2051TJF
G2 Axle & Gear is proud to introduce our new CORE 44 front axle housing for 1997 to 2006 Jeep TJ/LJ Wranglers. Utilizing the strongest and latest generation Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 35 or Stock/Rubicon Dana 44s. The CORE 44 will accept stock Dana 44 ring and pinions, axle shafts, and all aftermarket lockers. The CORE 44 features a unique Adjuster Nut System to easily set backlash and carrier pre-load. The CORE 44 includes heavy duty 3in. x .250in. wall tubing to resist bending in even the most extreme conditions. All CORE 44 brackets are laser cut and CNC formed from 3/8in. steel for added strength, and are designed to allow bolt-in installation.
Details:- Fits 1997 to 2006 TJ Wrangler and LJ Wrangler Unlimited
- Bolt-in application
- Bare axle housing
- Includes G2 diff cover
- To be used with JK Ring and Pinion
- 3in. x 5/1 in. DOM heavy-duty axle tubes
- 3/8in. CNC-formed heavy-duty brackets
- Spanner nuts for easy backlash adjustment
SKU: 67-2051TJF -
Axle Housing
Core 44 Front SEA Housing Stock Add Caster 4 Plus Inch Lift 07-Pres Wrangler JK G2 Axle and Gear 67-2051JKFSL
Axle HousingCore 44 Front SEA Housing Stock Add Caster 4 Plus Inch Lift 07-Pres Wrangler JK G2 Axle and Gear 67-2051JKFSL
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. The CORE 44 will accept stock Dana 44 ring and pinions, axle shafts, and all aftermarket lockers. The CORE 44 features a unique Adjuster Nut System to easily set backlash and carrier pre-load. The CORE 44 includes heavy duty forged inner C ends, and 3in. x .250in. wall tubing to resist bending in even the most extreme conditions. All CORE 44 brackets are laser cut and CNC formed from 3/8in. steel for added strength, and are designed to allow bolt-in installation.
Details:- G2 Axle and Gear CORE 44 Housing, Front Bolt in Replacement
- High Pinion
- Added caster for 4in. and higher Lift Kit
- Uses SAE carrier bearings for aftermarket locker options
- 3in. X .25in. DOM Heavy Duty axle tubes
- 3/8in. CNC-formed Heavy Duty Brackets
- Heavy Duty Forged Bearing Caps
- Massive Forged inner C-end’s
SKU: 67-2051JKFSL -
Axle Housing
Core 44 Front SEA Housing Stock Caster 0-4 Inch Lift 07-Pres Wrangler JK G2 Axle and Gear 67-2051JKFS
Axle HousingCore 44 Front SEA Housing Stock Caster 0-4 Inch Lift 07-Pres Wrangler JK G2 Axle and Gear 67-2051JKFS
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. The CORE 44 will accept stock Dana 44 ring and pinions, axle shafts, and all aftermarket lockers. The CORE 44 features a unique Adjuster Nut System to easily set backlash and carrier pre-load. The CORE 44 includes heavy duty forged inner C ends, and 3in. x .250in. wall tubing to resist bending in even the most extreme conditions. All CORE 44 brackets are laser cut and CNC formed from 3/8in. steel for added strength, and are designed to allow bolt-in installation.
Details:- G2 Axle and Gear CORE 44 Housing, Front Bolt in Replacement
- High Pinion
- Stock caster for up to 4in. of lift
- Uses SAE carrier bearing for aftermarket locker options
- 3in. X .25in. DOM Heavy Duty axle tubes
- 3/8in. CNC-formed Heavy Duty Brackets
- Heavy Duty Forged Bearing Caps
- Massive Forged inner C-ends
SKU: 67-2051JKFS -
Axle Housing
Core 44 Rear Bare Axle Housing W/Diff Cover 97-06 Wrangler TJ/LJ G2 Axle and Gear 67-2052TJR
Axle HousingCore 44 Rear Bare Axle Housing W/Diff Cover 97-06 Wrangler TJ/LJ G2 Axle and Gear 67-2052TJR
G2 Axle & Gear is proud to introduce our new CORE 44 rear axle housing for 1997 to 2006 Jeep TJ/LJ Wranglers. Utilizing the strongest and latest generation Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 35 or Stock/Rubicon Dana 44. The CORE 44 will accept stock Dana 44 ring and pinions, axle shafts, and all aftermarket lockers. The CORE 44 features a unique Adjuster Nut System to easily set backlash and carrier pre-load. The CORE 44 includes heavy duty 3in. x .250in. wall tubing to resist bending in even the most extreme conditions. All CORE 44 brackets are laser cut and CNC formed from 3/8in. steel for added strength, and are designed to allow bolt-in installation.
Details:- Fits 1997 to 2006 TJ Wrangler and LJ Wrangler Unlimited
- Bolt-in application
- Bare axle housing
- Includes G2 diff cover
- To be used with JK Ring and Pinion
- 3in. x 5/16in. DOM heavy-duty axle tubes
- 3/8in. CNC-formed heavy-duty brackets
- Spanner nuts for easy backlash adjustment
- Heavy-duty forged bearing caps
SKU: 67-2052TJR -
Axle Housing
Core 44 Rear Metric Axle Housing 07-Pres Wrangler JK G2 Axle and Gear 67-2052JKR
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock rear axle. The CORE 44 will accept stock Dana 44 ring and pinions, axle shafts, and all aftermarket lockers. The CORE 44 features a unique Adjuster Nut System to easily set backlash and carrier pre-load. The CORE 44 includes heavy duty 3in. x .250in. wall tubing to resist bending in even the most extreme conditions. All CORE 44 brackets are laser cut and CNC formed from 3/8in. steel for added strength, and are designed to allow bolt-in installation.
Details:- G2 Axle and Gear CORE 44 Housing
- Rear Bolt in Replacement
- Uses Metric carrier bearings to allow the use of factory air locker
- 3in. X .25in. DOM Heavy Duty axle tubes
- 3/8in. CNC-formed Heavy Duty Brackets
- Spanner Nuts for backlash adjustment
- Heavy Duty Forged Bearing Caps
SKU: 67-2052JKR -
Axle Housing
Core 44 SAE Rear Axle Housing 07-Pres Wrangler JK G2 Axle and Gear 67-2052JKRS
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock rear axle. The CORE 44 will accept stock Dana 44 ring and pinions, axle shafts, and all aftermarket lockers. The CORE 44 features a unique Adjuster Nut System to easily set backlash and carrier pre-load. The CORE 44 includes heavy duty 3in. x .250in. wall tubing to resist bending in even the most extreme conditions. All CORE 44 brackets are laser cut and CNC formed from 3/8in. steel for added strength, and are designed to allow bolt-in installation.
Details:- G2 Axle and Gear CORE 44 Housing
- Rear Bolt in Replacement
- Uses SAE carrier bearings for aftermarket locker options
- 3in. X .25in. DOM Heavy Duty axle tubes
- 3/8in. CNC-formed Heavy Duty Brackets
- Spanner Nuts for backlash adjustment
- Heavy Duty Forged Bearing Caps
SKU: 67-2052JKRS -
Ring & Pinion
Dana 30 4.56 Front Reverse Ring And Pinion 07-Pres Wrangler JK G2 Axle and Gear 2-2050-456R
Ring & PinionDana 30 4.56 Front Reverse Ring And Pinion 07-Pres Wrangler JK G2 Axle and Gear 2-2050-456R
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available
Details:- For Use With 3.73 And Up Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 2-2050-456R -
Ring & Pinion
Dana 30 4.88 Front Reverse Ring And Pinion 07-Pres Wrangler JK G2 Axle and Gear 2-2050-488R
Ring & PinionDana 30 4.88 Front Reverse Ring And Pinion 07-Pres Wrangler JK G2 Axle and Gear 2-2050-488R
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
Details:- For Use With 3.73 And Up Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
SKU: 2-2050-488R -
Ring & Pinion
Dana 30 5.13 Front Reverse Ring And Pinion 07-Pres Wrangler JK G2 Axle and Gear 2-2050-513R
Ring & PinionDana 30 5.13 Front Reverse Ring And Pinion 07-Pres Wrangler JK G2 Axle and Gear 2-2050-513R
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
Details:- For Use With 3.73 And Up Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 2-2050-513R -
Axle Shafts
Dana 30 Front Axle Kit 27 Spl 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 98-2050-001
G2 offers a full line of high strength 4340 chrome/nickel (Chromoly) axles designed to handle the punishment of off-road driving, increased loads of oversized tires and the high torque produced by the ultra low geared vehicles. These axles are forged from high tensile strength 4340 alloy with particular attention paid to key weak areas of the original design. Additional material is added to the yoke area surrounding the u-joint cap to prevent distortion leading to damaged bearings.
Details:- Front Axle Kit
- Dana 30
- 27 Spline
- Machined For Full Circle Snap Rings
- Uses 5-760X Joint
- For Use In 2007-2009 Jeep Wrangler JK Non Rubicon
SKU: 98-2050-001 -
Axle Truss
Dana 30 Front Axle Truss Top Truss Only 07-Pres Wrangler JK G2 Axle and Gear 68-2050-1
The all new G2 Heavy Duty JK Front Dana 30 axle truss and armor system gives your JK the strength it needs to take serious abuse. Constructed from 1/4in. thick main components and 1/8in. thick reinforcement plates, this truss design provides critical strengthening in a lightweight package across the whole axle, not just the long tube. All components are laser cut to precise specifications to ensure a perfect fit for easy installation. Welding is required, including to the cast center section. Professional welding skills are strongly recommended. The G2 heavy duty JK Rubicon Front Dana 44 axle truss and armor system is intended for use on JKs with at least some lift. For vehicles with minimal or no lift, please check clearances before installation. This system is designed for US-Spec vehicles.
Details:- Fits 2007 to 2016 JK Dana 30 front axle
- 2 and 4-door models
- Heavy-duty steel construction
- Unpainted
- Welding required
- Includes top truss only
- Without steering ram mount
SKU: 68-2050-1 -
Axle Truss
Dana 30 Front Axle Truss W/Gusset, Truss, Bracket 07-Pres Wrangler JK G2 Axle and Gear 68-2050
Axle TrussDana 30 Front Axle Truss W/Gusset, Truss, Bracket 07-Pres Wrangler JK G2 Axle and Gear 68-2050
The all new G2 Heavy Duty JK Front Dana 30 axle truss and armor system gives your JK the strength it needs to take serious abuse. Constructed from 1/4in. thick main components and 1/8in. thick reinforcement plates, this truss design provides critical strengthening in a lightweight package across the whole axle, not just the long tube. All components are laser cut to precise specifications to ensure a perfect fit for easy installation. Welding is required, including to the cast center section. Professional welding skills are strongly recommended. The G2 heavy duty JK Rubicon Front Dana 44 axle truss and armor system includes Lower Control Arm Skids, Inner C Gussets, Reinforced Stock Height Track Bar Bracket, and main Axle Truss Assembly.
Details:- Fits 2007 to 2016 JK Dana 30 front axle
- 2 and 4-door models
- Heavy-duty steel construction
- Unpainted
- Welding required
- Includes gusset, truss and bracket
- Without Steering Ram Mount
SKU: 68-2050 -
Axle Shafts
Dana 30 Inner Axle Shaft 27 Spl LH Side 07-09 Wrangler JK Large U Joint G2 Axle and Gear 97-2050-005
Axle ShaftsDana 30 Inner Axle Shaft 27 Spl LH Side 07-09 Wrangler JK Large U Joint G2 Axle and Gear 97-2050-005
G2 high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
Details:- G2 Axle and Gear Chromoly Inner Axle Shaft
- Dana 30
- 27 Spline
- 18.80in.Overall Length
- Accepts 5-7166X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 2007-2009 Jeep JK Front Dana 30 Non Rubicon Driver Side
SKU: 97-2050-005 -
Axle Shafts
Dana 30 Inner Axle Shaft 27 Spl LH Side 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 97-2050-003
Axle ShaftsDana 30 Inner Axle Shaft 27 Spl LH Side 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 97-2050-003
G2 high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
Details:- G2 Axle and Gear Chromoly Inner Axle Shaft
- Dana 30
- 27 Spline
- 18.80in. Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 2007-2009 Jeep JK Front Dana 30 Non Rubicon Driver Side
SKU: 97-2050-003 -
Axle Shafts
Dana 30 Inner Axle Shaft 27 Spl RH Side 07-09 Wrangler JK Large U Joint G2 Axle and Gear 97-2050-004
Axle ShaftsDana 30 Inner Axle Shaft 27 Spl RH Side 07-09 Wrangler JK Large U Joint G2 Axle and Gear 97-2050-004
G2 high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
Details:- G2 Axle and Gear Chromoly Inner Axle Shaft
- Dana 30
- 27 Spline
- 34.60in.Overall Length
- Accepts 5-7166X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 2007-2009 Jeep JK Front Dana 30 Non Rubicon Passenger Side
SKU: 97-2050-004 -
Axle Shafts
Dana 30 Inner Axle Shaft 27 Spl RH Side 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 97-2050-002
Axle ShaftsDana 30 Inner Axle Shaft 27 Spl RH Side 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 97-2050-002
G2 high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
Details:- G2 Axle and Gear Chromoly Inner Axle Shaft
- Dana 30
- 27 Spline
- 34.6in.Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 2007-2009 Jeep JK Front Dana 30 Non Rubicon Passenger Side
SKU: 97-2050-002 -
Axle Shafts
Dana 30 Outer Axle Shaft 32 Spl LH Side 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 97-2050-001
Axle ShaftsDana 30 Outer Axle Shaft 32 Spl LH Side 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 97-2050-001
G2 high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
Details:- G2 Axle and Gear Chromoly Outer Axle Shaft Dana 30 JK
- 32 Spline
- 6.25in. Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 2007-2009 Jeep JK Non Rubicon
SKU: 97-2050-001 -
Ring & Pinion
Dana 44 3.54 Ring And Pinion OE Ratio G2 Axle and Gear 1-2033-354
G2 O.E.M, Series gears are designed to run cooler and quieter than normal after market gears. G2 Axle And Gear has contracted with the Original Equipment Manufactures to make these gears. No more questions about reliability or noise level here, these are the gears that came in your truck from the factory.
Details:- For Use With 3.73 And Down Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 1-2033-354 -
Ring & Pinion
Dana 44 3.73 Ring And Pinion OE Ratio G2 Axle and Gear 1-2033-373
G2 O.E.M, Series gears are designed to run cooler and quieter than normal after market gears. G2 Axle And Gear has contracted with the Original Equipment Manufactures to make these gears. No more questions about reliability or noise level here, these are the gears that came in your truck from the factory.
Details:- For Use With 3.73 And Down Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 1-2033-373 -
Ring & Pinion
Dana 44 4.09 Ring And Pinion OE Ratio Bare Gears Only No Setup G2 Axle and Gear 1-2033-409
Ring & PinionDana 44 4.09 Ring And Pinion OE Ratio Bare Gears Only No Setup G2 Axle and Gear 1-2033-409
G2 O.E.M. Series gears are designed to run cooler and quieter than normal after market gears. G2 Axle And Gear has contracted with the Original Equipment Manufactures to make these gears. No more questions about reliability or noise level here, these are the gears that came in your truck from the factory.
Details:- For Use With 3.91 And Up Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 1-2033-409 -
Ring & Pinion
Dana 44 4.09 Ring And Pinion Rev OE Ratio G2 Axle and Gear 1-2033-409R
G2 O.E.M. Series gears are designed to run cooler and quieter than normal after market gears. G2 Axle And Gear has contracted with the Original Equipment Manufactures to make these gears. No more questions about reliability or noise level here, these are the gears that came in your truck from the factory.
Details:- For Use With 3.91 And Up Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 1-2033-409R -
Ring & Pinion
Dana 44 4.56 Front Reverse Ring And Pinion 07-Pres Wrangler JK Rubicon G2 Axle and Gear 2-2051-456R
Ring & PinionDana 44 4.56 Front Reverse Ring And Pinion 07-Pres Wrangler JK Rubicon G2 Axle and Gear 2-2051-456R
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
Details:- For Use With 3.73 And Down Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 2-2051-456R -
Ring & Pinion
Dana 44 4.56 Rear Ring And Pinion 07-Pres Wrangler JK Rubicon G2 Axle and Gear 2-2052-456
Ring & PinionDana 44 4.56 Rear Ring And Pinion 07-Pres Wrangler JK Rubicon G2 Axle and Gear 2-2052-456
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
Details:- For Use With 3.73 And Down Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 2-2052-456 -
Ring & Pinion
Dana 44 4.56 Ring And Pinion OE Ratio G2 Axle and Gear 1-2033-456
G2 O.E.M, Series gears are designed to run cooler and quieter than normal after market gears. G2 Axle And Gear has contracted with the Original Equipment Manufactures to make these gears. No more questions about reliability or noise level here, these are the gears that came in your truck from the factory.
Details:- For Use With 3.91 And Up Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 1-2033-456 -
Ring & Pinion
Dana 44 4.88 Front Reverse Ring And Pinion 07-Pres Wrangler JK Rubicon G2 Axle and Gear 2-2051-488R
Ring & PinionDana 44 4.88 Front Reverse Ring And Pinion 07-Pres Wrangler JK Rubicon G2 Axle and Gear 2-2051-488R
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
Details:- For Use With 3.73 And Down Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 2-2051-488R -
Ring & Pinion
Dana 44 4.88 Rear Ring And Pinion 07-Pres Wrangler JK Rubicon G2 Axle and Gear 2-2052-488
Ring & PinionDana 44 4.88 Rear Ring And Pinion 07-Pres Wrangler JK Rubicon G2 Axle and Gear 2-2052-488
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
Details:- For Use With 3.73 And Down Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 2-2052-488 -
Ring & Pinion
Dana 44 4.89 Ring And Pinion OE Ratio G2 Axle and Gear 1-2033-489
G2 O.E.M, Series gears are designed to run cooler and quieter than normal after market gears. G2 Axle And Gear has contracted with the Original Equipment Manufactures to make these gears. No more questions about reliability or noise level here, these are the gears that came in your truck from the factory.
Details:- For Use With 3.91 And Up Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 1-2033-489 -
Ring & Pinion
Dana 44 5.13 Front Reverse Ring And Pinion 07-Pres Wrangler JK Rubicon G2 Axle and Gear 2-2051-513R
Ring & PinionDana 44 5.13 Front Reverse Ring And Pinion 07-Pres Wrangler JK Rubicon G2 Axle and Gear 2-2051-513R
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
Details:- For Use With 3.73 And Down Carrier
- 10 Year Warranty
- Computer Heat Treated 8620 Steel
- Manufactured To O.E. Specifications
- Double Shot Peened
- Double Lapped
SKU: 2-2051-513R
