HitchLink 2.0 Reciever Shackle Mount 2 Inch Receivers Red Factor 55
Hitchlink 2.0 Reciever Shacle Mount. Use your receiver as a recovery tow point.
Features:
- Color: Red
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 1.9 pounds. Steel versions weigh up to 8 pounds
- Rated at 9500 pounds
- Ultimate failure at 51,000 pounds
- Fits standard 2 inch receivers
- Fits common 3/4 screw pin shackles/D-Rings
- Anodized or powder coated for oxidation protection
- Made in USA
Warning:
- Never exceed factory receiver hitch pull rating
- Always use a quality steel alloy 5/8 inch hitch pin
- Always pull in line with the hitch, do not bind or side load the shackle
$75.95 $79.95
Related products
-
Winch Shackle
FlatLink XXL Winch Shackle Mount Assembly Anodized Gray Factor 55
0 out of 5(0)The world’s first foldable winch shackle mount with self centering load pool. Compatible with wire rope diameters of up to 3/4 inch and synthetic rope tube thimbles up to 5/8 inch in diameter. Fits shackle pin diameters of 1 1/8 inch. 7/8 inch diameter titanium double shear pin. Minimum breaking strength of 65,000 lbs.
Features:- Color: Anodized Gray
- Replace conventional winch hooks with a safer more secure shackle/D-ring
- Safer recoveries through the practice of Closed System Winching
- Lightweight – Precision CNC machined 6000 series Military Grade Aluminum
- No splicing required – double shear pin design
- Designed for both steel cable and synthetic winch rope eyes
- Equipped with a shear pin load centering spool for wire rope applications
- Foldable and stows rattle free against fairleads
- Integrated EPDM rubber pads for fairlead protection
- Fits common 7/8 and 1inch screw pin shackle sizes (1.0 and 1.125 pin diameters)
- For synthetic rope diameters up to 5/8 and wire rope up to 1 inch
- Available in the Military Specification Hard Anodizing (Mil-A-8625 F Type III) Gray
- 7/8 inch diameter double shear pin
- Max Rated Load: 26,000 pounds
- Ultimate Strength: 68,000 pounds
- Weight: 51oz
- Made in USA
SKU: 00090-06-GGBW$189.95$199.95 -
Winch Shackle
ProLink E Expert Shackle Mount Assembly Red Factor 55
0 out of 5(0)ProLink Expert. Replace conventional winch hooks with a safer more secure shackle/D-ring. Lightweight, Precision CNC machined 6000 series aluminum. No splicing required, titanium double shear pin design.
Designed for both steel cables and synthetic winch ropes. Integrated EPDM rubber boot for fairlead protection. Connects to either the pin or bow end of common 3/4 inch screw pin shackles. Connects to the pin ends of 7/8 inch and 1 inch screw pin shackles. Fits over most OEM tow hooks.
Warning: Keep forces in line. Do not side load shackleFeatures:
- Color: Red
- For rope and cable diameters up to 3/8 inch
- Fits common 3/4 inch screw pin shackles/D-rings
- Mil-Spec anodized or powder coated
- 5/8 inch diameter 6AI-4V titanium double shear pin
- Max Load: 16,000 pounds
- Ultimate Strength: 40,000 pounds
- Weight: 30oz
SKU: 00310-01-GGBW$189.95$199.95 -
Winch Shackle
FlatLink Winch Shackle Mount Assembly Gray Factor 55
0 out of 5(0)Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.
Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment.
The FlatLink does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink by a 5/8 inch diameter grade 5 steel double shear pin and internal snap ring. It is installed easily in minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink with 4 barbed tips.
The FlatLink stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles. The FlatLink is constructed of 6000 series billet aluminum and is anodized/powder coated in 5 different colors.
Features:- Color: Gray
- Precision machined from 6000 series aluminum
- Compatible with all roller fairlead license plate mounting brackets
- When folded flat – less than 1.75 inches of thickness
- Weight – 23 ounces
- Max load rating : 16,000 pounds
- Ultimate failure : greater than 40,000 pounds
- Fits steel cables and synthetic winch ropes to 3/8 inch diameters
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage.
- Simple snap ring removal for shear pin.
- Fits common 3/4 shackles/D-Rings
- Eliminates hook rattle and fairlead damage
- Made In USA
SKU: 00050-06-GGBW$132.94$139.94 -
Winch Shackle
HitchLink 2.0 Reciever Shackle Mount 2 Inch Receivers Blue Factor 55
0 out of 5(0)Hitchlink 2.0 Reciever Shacle Mount. Use your receiver as a recovery tow point.
Features:- Color: Blue
- Lightweight precision CNC machined 6000 series aluminum
- Weighs only 1.9 pounds. Steel versions weigh up to 8 pounds
- Rated at 9500 pounds
- Ultimate failure at 51,000 pounds
- Fits standard 2 inch receivers
- Fits common 3/4 screw pin shackles/D-Rings
- Anodized or powder coated for oxidation protection
- Made in USA
Warning:
- Never exceed factory receiver hitch pull rating
- Always use a quality steel alloy 5/8 inch hitch pin
- Always pull in line with the hitch, do not bind or side load the shackle
SKU: 00020-02-GGBW$75.95$79.95 -
Winch Shackle
ProLink E Expert Shackle Mount Assembly Gray Factor 55
0 out of 5(0)ProLink Expert. Replace conventional winch hooks with a safer more secure shackle/D-ring. Lightweight, Precision CNC machined 6000 series aluminum. No splicing required, titanium double shear pin design.
Designed for both steel cables and synthetic winch ropes. Integrated EPDM rubber boot for fairlead protection. Connects to either the pin or bow end of common 3/4 inch screw pin shackles. Connects to the pin ends of 7/8 inch and 1 inch screw pin shackles. Fits over most OEM tow hooks.
Warning: Keep forces in line. Do not side load shackleFeatures:
- Color: Gray
- For rope and cable diameters up to 3/8 inch
- Fits common 3/4 inch screw pin shackles/D-rings
- Mil-Spec anodized or powder coated
- 5/8 inch diameter 6AI-4V titanium double shear pin
- Max Load: 16,000 pounds
- Ultimate Strength: 40,000 pounds
- Weight: 30oz
SKU: 00310-06-GGBW$189.95$199.95