NP231 Tail Shaft Conversion Kit Pro Comp Suspension
The Tail Shaft Conversion kit for 5 Front/Rear lift height shortens the Transfer Case allowing for a 4 Inch longer CV Style drive shaft, improves driveline alignment, reduces bind, friction and vibration. drive shaft sold separately. Fits NP231 Transfer Case Only. Will not fit NP207 in some models.
Details:
- Fits 1987 to 2006 Wrangler and Unlimited
- For NP231 transfer case only
- 20 percent Larger mainshaft over factory shaft
- 4 Inch shorter than stock
$329.99
Related products
-
Drive Shaft
Rubicon Express CVF Drive Shaft Rear 24.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-245
Drive ShaftRubicon Express CVF Drive Shaft Rear 24.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-245
TJ CVF Rear Drive Shaft. Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 24.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-245 -
Drive Shaft
Rubicon Express CVF Drive Shaft Rear 40.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-405
Drive ShaftRubicon Express CVF Drive Shaft Rear 40.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-405
TJ CVF Rear Drive Shaft. Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 40.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-405 -
Drive Shaft
Rubicon Express CVF Drive Shaft Rear 38.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-385
Drive ShaftRubicon Express CVF Drive Shaft Rear 38.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-385
TJ CVF Rear Drive Shaft. Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 38.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-385 -
Drive Shaft
Rubicon Express CVF Drive Shaft Rear 19.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-195
Drive ShaftRubicon Express CVF Drive Shaft Rear 19.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-195
TJ CVF Rear Drive Shaft. Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 19.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-195 -
Drive Shaft
Rubicon Express CVF Drive Shaft Rear 37.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-375
Drive ShaftRubicon Express CVF Drive Shaft Rear 37.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-375
TJ CVF Rear Drive Shaft. Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 37.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-375