Weight | 60 lbs |
---|
DV8 Offroad FDJL-02 Jeep JL Slim Fenders (Set of 4) with LED Turn Signal Lights
FDJL-02 2018+ Jeep JL Slim Fenders (Set of 4)
The DV8 Offroad FDJL-02 Fenders were designed for maximum clearance when traversing narrow passages that would rip off an ordinary width fender. They bolt on with no drilling required and feature a turn signal light that can integrate into the factory harness.
Features:
-Slim design
-Textured 3 stage powdercoat
-Solid steel construction
-Light weight
-Bolt on installation
-Standard DV8 warranty
$552.99 $614.49
Related products
-
Flat Fenders
JK Front Crusher Flares Narrow Width (Steel) Poison Spyder – 17-03-031
0 out of 5(0)JK Front Crusher Flares Narrow Width (Steel) for Jeep Wrangler JK 2007-2016. These Narrow JK Crusher Flares are 2 inches narrower than our Standard Width Crusher Flares. This gives you 2 inches of extra clearance from canyon walls, trees and obstacles on tight trails. The Jeep JKs thin sheet metal fenders and Stock plastic flares are among the most vulnerable body components when traversing the trail. The Poison Spyder JK Front Crusher Flare kit improves both the aesthetics and durability of your Jeep during your off road adventures. Steel Crusher Flares and Poison Spyders exclusive Inner Brace system are the ultimate in front fender armor for your JK, with the toughness to withstand punishing scrapes with granite canyon walls. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:
- Replace flimsy plastic OE fender flares with heavy duty steel
- Narrow Width is 2 inches narrower than Standard Width flares (check your local tire coverage laws before ordering)
- CNC laser cut 3/16 inch mounting plate and 1/8 inch top plate
- CNC roll-bent 1.5 inch OD X .120 wall DOM tube outer rub rail
- Roll-bending gives smooth, sweeping, continuous bends that match the Jeep lines perfectly
- Internal bracing kit transfers impact loads to Jeep heavy gauge inner tub structure
- Bare Finish
- Sold As A Pair
Construction
Steel JK Crusher Flares are constructed using 1.5 inch X .120 wall DOM (Drawn-Over-Mandrel) structural tubing as the outer rub rail. This DOM tubing provides better resistance to crushing, kinking, and bending than competitors flares made with thinner wall, welded seam tubing. The foundation of the Crusher Flare is a CNC laser cut, 3/16 inch thick steel mounting plate, precision brake-formed to conform to the subtle curves of the JKs body panels. Mounting holes are countersunk for the use of flat-head stainless steel mounting hardware. The top plate is CNC laser cut 1/8 inch steel plate, which is hand formed around the curves of the Crusher Flare for a factory appearance that matches the JKs organic body lines better than any other aftermarket metal flare
Exclusive Inner Brace Set
Every set of Poison Spyder JK Crusher Flares comes with a set of inner braces that tie the Crusher Flare in to the sturdier, heavier-gauge steel of the JKs inner body tub structure. Competitors JK Flare products simply bolt directly to the outer layer of the JKs body sheet metal. But as any JK owner kNows, the exterior sheet metal is very thin and flexible. Simply bolting a heavy duty fender directly to the exterior sheet metal without the inner bracing is a disaster waiting to happen. Regardless of how sturdy the flare is built, upon contact with rocks, trees, etc., it will simply push in and deform the flimsy sheet metal it is bolted to, possibly causing expensive and unsightly damage.The Inner Brace Set that comes with Poison Spyder Crusher Flares effectively bypasses the outer sheet metal, instead transferring those forces to the much stronger inner structure of the Jeep. Thats why weve been able to demonstrate the strength of our flare attachment system by parking aNother Jeep on top of the Crusher Flare! These Inner Braces are CNC laser cut, brake-formed for a great fit and simple installation.
Rubber Liners Included
JK Front Crusher Flares come with high quality rubber liners to place between the Crusher Flare and the Jeep body sheet metal during installation. The rubber liners provide help protect your Jeep exterior paint, where the flare contacts it. It also helps even out the contact area of the Crusher Flare, absorbing any small bumps or imperfections between the mated surfaces. The rubber liner also helps keep moisture, dirt and debris from collecting between the Crusher Flare and the Jeep body. These liners are cut from premium EPDM rubber.
Retain Factory Wheel Wells
When installing Poison Spyder JK Front Crusher Flares you have the option of retaining the factory wheel well liner to protect the engine from trail and road debris. Retaining the wheel well also helps to conceal the Inner Braces to complete a clean and finished appearance. Some trimming of the plastic wheel well is required, but the kit comes with hardware and mounting brackets to re-install the trimmed wheel well.
Provisions for LED Marker Lamps
The JK Front Crusher Flare kit comes Standard with mounting provisions to replace the factory side marker with a high intensity 3/4 inch round LED marker light. The addition of the LED provides a more modern and refined look that complements the function and style of the Crusher Flare.
Steel or Aluminum?
Not sure whether to choose steel or aluminum for your Crusher Flares? Aluminum is lighter in weight, so might be the best choice for those looking to save weight on their heavy JKs in order to improve fuel mileage and gain an advantage off-road. However, when wheeling with aluminum flares it is up to the driver to use more care and finesse, as the aluminum components are Not going to be able to withstand the same direct impacts that steel can. The outer tube on our aluminum Crusher Flares is beefy .188 wall thickness. Compared to our steel Crusher Flares which use .120 wall DOM steel tubing. The thicker tube wall recoups some of the strength lost by going to aluminum, however the steel versions will still be stronger in a direct impact with the rocks. For reference, a steel JK Front Crusher Flare weighs 31.6 lbs (Not including hardware), while an aluminum one weighs only 11.8 lbs. Which is best for you will depend on your particular intended use of the Jeep, driving style and other factors.SKU: 17-03-031-PSC$508.99 -
Flat Fenders
JK Rear Crusher Flares Standard Width (Steel) Black Poison Spyder – 17-05-010P1
0 out of 5(0)JK Rear Crusher Flares Standard Width (Steel) Black for Jeep Wrangler JK 2007-2016. The Jeep JK thin sheetmetal fenders and stock plastic flares are among the most vulnerable body components when traversing the trail. The Poison Spyder JK Rear Crusher Flare kit improves both the aesthetics and durability of your Jeep during your off road adventures. Poison Spyder Standard Width JK Crusher Flares provide tire coverage similar to the factory flares, with the added advantage of a better departure angle and outer tire clearance. Steel Crusher Flares and Poison Spyder exclusive Inner Brace system are the ultimate in fender armor for your JK, with the toughness to withstand punishing scrapes with granite canyon walls. This product is finished in black with Poison Spyder proprietary SpyderShell Armor Coat process.
Features:- Replace flimsy plastic OE fender flares with heavy duty steel
- Standard Width mimics approximate width of Stock fender flares
- CNC laser cut 3/16 inch mounting plate and 1/8 inch top plate
- NC bent 1.5 inch OD X .120 wall DOM tube outer rub rail
- Internal bracing kit transfers impact loads to Jeep heavy gauge inner tub structure
- Black Spydershell Armor Coat Finish
- Sold As A Pair
Roll-Bent Outer Tubes
Poison Spyder Crusher Flares were the first all-metal armored flare on the market when the Jeep JK debuted with the 2007 model year. Since then dozens of companies have tried to duplicate the original. But Poison Spyder stays a step ahead, and now Crusher Flares are the only metal armored flare on the market constructed with CNC Roll-Bent Outer Tubes. Using the latest technology in computer-controlled roll-benders to form these tubes results in several advantages. First, and most obviously, roll-bending results in a much more elegant product, whose subtle curves match the lines of the Jeep JK perfectly. Our competitors products are easy to spot because parts made on traditional tube benders have sharp, segmented bends that simply cant match the Jeeps body lines as well. The other benefit is that roll-bending is a gentler process, resulting in less weakening of the tube where it stretches or compresses around bends. Only Poison Spyder Crusher Flares are manufactured with this state-of-the-art CNC roll-bending process!
SpyderShell Armor Coat
SpyderShell is more than just powder coating—its a complete system that includes the state of the art in preparation, application, materials and packaging to ensure that your SpyderShell products stay looking great for years. The SpyderShell process has been engineered to provide your Poison Spyder product with years of unmatched great looks, corrosion protection and weather-resistance. Our proprietary 6-stage system starts with media blasting the entire part, to remove contaminents and prep the metal surface for the best possible adhesion. Next, any seams are sealed with 3M Scotch-Weld to block moisture from entering and causing corrosion where the powder can Not reach. The first coat to be applied is a zinc-rich powdered black primer, which is baked on to form an impenetrable bond between the metal product and the coating. The primer is black–rather than traditional gray–so that any rock chips or trail damage are less conspicuous. The final top coat is an industrial grade, super-durable architectural finish in semi-gloss black, which is engineered to retain its appearance through years of exposure to sun and weather. SpyderShell is a coating process unmatched by any other Jeep armor aftermarket manufacturer, for which we are confident in offering a 5-year warranty on materials and workmanship.
Exclusive Inner Brace Set
Every set of Poison Spyder JK Crusher Flares comes with a set of inner braces that tie the Crusher Flare in to the sturdier, heavier-gauge steel of the JK inner body tub structure. Competitors JK Flare products simply bolt directly to the outer layer of the JK body sheetmetal. But as any JK owner knows, the exterior sheetmetal is very thin and flexible. Simply bolting a heavy duty fender directly to the exterior sheetmetal without the inner bracing is a disaster waiting to happen. Regardless of how sturdy the flare is built, upon contact with rocks, trees, etc., it will simply push in and deform the flimsy sheetmetal it is bolted to, possibly causing expensive and unsightly damage. The Inner Brace Set that comes with Poison Spyder Crusher Flares effectively bypasses the outer sheetmetal, instead transferring those forces to the much stronger inner structure of the Jeep. These Inner Braces are CNC laser cut, brake-formed for a great fit and simple installation.
Provisions for LED Marker Lamps
The JK Rear Crusher Flare Kit comes standard with mounting provisions to place a small 3/4 inch LED marker lamp inside the flare just rearward of the tire. The LED can be wired in to the Jeeps running lights or turn signal circuits. 3/4 inch amber LED lamps are available separately from Poison Spyder.
Steel or Aluminum?
Not sure whether to choose steel or aluminum for your Crusher Flares? Aluminum is lighter in weight, so might be the best choice for those looking to save weight on their heavy JKs in order to improve fuel mileage and gain an advantage off-road. However, when wheeling with aluminum flares it is up to the driver to use more care and finesse, as the aluminum components are Not going to be able to withstand the same direct impacts that steel can. The outer tube on our aluminum Crusher Flares is beefy .188 wall thickness. Compared to our steel Crusher Flares which use .120 wall DOM steel tubing. The thicker tube wall recoups some of the strength lost by going to aluminum, however the steel versions will still be stronger in a direct impact with the rocks. Aluminum JK Crusher Flares are less than half the weight of the steel version. Which is best for you will depend on your particular intended use of the Jeep, driving style and other factors.SKU: 17-05-010P1-PSC$668.99 -
Flat Fenders
Jeep JK 2/4 Door Notorious Dovetail Rear Fender Flare 07-18 Wrangler JK Unfinished Nemesis Industries
Flat FendersJeep JK 2/4 Door Notorious Dovetail Rear Fender Flare 07-18 Wrangler JK Unfinished Nemesis Industries
0 out of 5(0)When Nemesis set its sights on developing body armor for the JK Wrangler, we we knew we wanted to change the game. We wanted to build the highest quality, most attractive fender available for the JK platform. Like all of Nemesis products, they had to be lightweight, high clearance and strong, built using Nemesis superior aluminum manufacturing techniques.
The result was the Notorious Fender Flare, a high clearance flare with style and class unmatched and unrivaled by other armor manufacturers. The Notorious rear flare offers high clearance for big tires on mild lift kits and is perfect for a daily driven JK that still sees heavy trail use. It maintains factory rear tire coverage to keep your rig road legal while making the rear corner of your Jeep much more bash resistant. It is constructed of formed aluminum and reinforced in all of the proper locations to provide maximum protection while keeping the weight down.
Notorious flares have the Skeletos upgrade as an option. Without the Skeletos upgrade, the flare is designed to absorb the biggest impacts, keeping the factory sheet metal straight. With the Skeletos upgrade, the flare is able to withstand even more punishment, able to be used to pivot off of obstacles and take large hits, but may transfer the force to the sheet metal.
Build Specs
- Finish: Bare
- JK Notorious Rear Flare-No Skeletos
- 2007-Current JK 2/4 Door
- Sold As Pair
Nemesis superior construction
Built from high strength 3/16 inch aluminum
Factory tire coverage
Formed and welded using Nemesis proprietary manufacturing techniques using hand built custom tooling
Seamless finish
Inspected for precision fit and finish to Nemesis high standards, fits right the first timeNotes
Skeletos upgrade available
Available in raw, black or textured powder coatInstallation
Installation can be handled by the average home installer, and can be completed in three hours for the pair, using basic hand tools and a drill.
SKU: 126500-HCQS$649.00 -
Flat Fenders
JK Front Crusher Flares Narrow Width (Aluminum) Poison Spyder – 17-03-031-ALUM
0 out of 5(0)JK Front Crusher Flares Narrow Width (Aluminum) for Jeep Wrangler JK 2007-2016. These Narrow JK Crusher Flares are 2 inches narrower than our Standard Width Crusher Flares. This gives you 2 inches of extra clearance from canyon walls, trees and obstacles on tight trails. These aluminum Crusher Flares are light weight at only 10 lbs. per fender yet durable. The Jeep JKs thin sheet metal fenders and Stock plastic flares are among the most vulnerable body components when traversing the trail. The Poison Spyder JK Front Crusher Flare kit improves both the aesthetics and durability of your Jeep during your off road adventures. Steel Crusher Flares and Poison Spyders exclusive Inner Brace system are the ultimate in front fender armor for your JK, with the toughness to withstand punishing scrapes with granite canyon walls. This product ships as bare steel it will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:
- Replace flimsy plastic OE fender flares with heavy duty steel
- Narrow Width is 2 inches narrower than Standard Width flares (check your local tire coverage laws before ordering)
- CNC laser cut 3/16 inch Aluminum mounting plate and 1/8 inch top plate
- CNC roll-bent 1.5 inch OD X .188 wall DOM tube outer rub rail
- Roll-bending gives smooth, sweeping, continuous bends that match the Jeep lines perfectly
- Internal bracing kit transfers impact loads to Jeep heavy gauge inner tub structure
- Bare Finish
- Sold As A Pair
Construction
Steel JK Crusher Flares are constructed using 1.5 inch X .188 wall DOM (Drawn-Over-Mandrel) aluminum structural tubing as the outer rub rail. This DOM tubing provides better resistance to crushing, kinking, and bending than competitors flares made with thinner wall, welded seam tubing. The foundation of the Crusher Flare is a CNC laser cut, 3/16 inch thick Aluminum mounting plate, precision brake-formed to conform to the subtle curves of the JKs body panels. Mounting holes are countersunk for the use of flat-head stainless steel mounting hardware. The top plate is CNC laser cut 1/8 inch aluminum plate, which is hand formed around the curves of the Crusher Flare for a factory appearance that matches the JKs organic body lines better than any other aftermarket metal flare
Exclusive Inner Brace Set
Every set of Poison Spyder JK Crusher Flares comes with a set of inner braces that tie the Crusher Flare in to the sturdier, heavier-gauge steel of the JKs inner body tub structure. Competitors JK Flare products simply bolt directly to the outer layer of the JKs body sheet metal. But as any JK owner knows, the exterior sheet metal is very thin and flexible. Simply bolting a heavy duty fender directly to the exterior sheet metal without the inner bracing is a disaster waiting to happen. Regardless of how sturdy the flare is built, upon contact with rocks, trees, etc., it will simply push in and deform the flimsy sheet metal it is bolted to, possibly causing expensive and unsightly damage.The Inner Brace Set that comes with Poison Spyder Crusher Flares effectively bypasses the outer sheet metal, instead transferring those forces to the much stronger inner structure of the Jeep. Thats why weve been able to demonstrate the strength of our flare attachment system by parking aNother Jeep on top of the Crusher Flare! These Inner Braces are CNC laser cut, brake-formed for a great fit and simple installation.
Rubber Liners Included
JK Front Crusher Flares come with high quality rubber liners to place between the Crusher Flare and the Jeep body sheet metal during installation. The rubber liners provide help protect your Jeep exterior paint, where the flare contacts it. It also helps even out the contact area of the Crusher Flare, absorbing any small bumps or imperfections between the mated surfaces. The rubber liner also helps keep moisture, dirt and debris from collecting between the Crusher Flare and the Jeep body. These liners are cut from premium EPDM rubber.
Retain Factory Wheel Wells
When installing Poison Spyder JK Front Crusher Flares you have the option of retaining the factory wheel well liner to protect the engine from trail and road debris. Retaining the wheel well also helps to conceal the Inner Braces to complete a clean and finished appearance. Some trimming of the plastic wheel well is required, but the kit comes with hardware and mounting brackets to re-install the trimmed wheel well.
Provisions for LED Marker Lamps
The JK Front Crusher Flare kit comes Standard with mounting provisions to replace the factory side marker with a high intensity 3/4 inch round LED marker light. The addition of the LED provides a more modern and refined look that complements the function and style of the Crusher Flare.
Steel or Aluminum?
Not sure whether to choose steel or aluminum for your Crusher Flares? Aluminum is lighter in weight, so might be the best choice for those looking to save weight on their heavy JKs in order to improve fuel mileage and gain an advantage off-road. However, when wheeling with aluminum flares it is up to the driver to use more care and finesse, as the aluminum components are Not going to be able to withstand the same direct impacts that steel can. The outer tube on our aluminum Crusher Flares is beefy .188 wall thickness. Compared to our steel Crusher Flares which use .120 wall DOM steel tubing. The thicker tube wall recoups some of the strength lost by going to aluminum, however the steel versions will still be stronger in a direct impact with the rocks. For reference, a steel JK Front Crusher Flare weighs 31.6 lbs (Not including hardware), while an aluminum one weighs only 11.8 lbs. Which is best for you will depend on your particular intended use of the Jeep, driving style and other factors.SKU: 17-03-031-ALUM-PSC$578.99 -
Flat Fenders
Jeep JK 2/4 Door Notorious Rear Fender Flare W/Skeletos 07-18 Wrangler JK Unfinished Nemesis Industries
Flat FendersJeep JK 2/4 Door Notorious Rear Fender Flare W/Skeletos 07-18 Wrangler JK Unfinished Nemesis Industries
0 out of 5(0)When Nemesis set its sights on developing body armor for the JK Wrangler, we we knew we wanted to change the game. We wanted to build the highest quality, most attractive fender available for the JK platform. Like all of Nemesis products, they had to be lightweight, high clearance and strong, built using Nemesis superior aluminum manufacturing techniques.
The result was the Notorious Fender Flare, a high clearance flare with style and class unmatched and unrivaled by other armor manufacturers. The Notorious rear flare offers high clearance for big tires on mild lift kits and is perfect for a daily driven JK that still sees heavy trail use. It maintains factory rear tire coverage to keep your rig road legal while making the rear corner of your Jeep much more bash resistant. It is constructed of formed aluminum and reinforced in all of the proper locations to provide maximum protection while keeping the weight down.
Notorious flares have the Skeletos upgrade as an option. Without the Skeletos upgrade, the flare is designed to absorb the biggest impacts, keeping the factory sheet metal straight. With the Skeletos upgrade, the flare is able to withstand even more punishment, able to be used to pivot off of obstacles and take large hits, but may transfer the force to the sheet metal.
Build Specs
- Finish: Bare
- JK Notorious Rear Flare W/Skeletos
- 2007-Current JK 2/4 Door
- Sold As Pair
Nemesis superior construction
Built from high strength 3/16 inch aluminum
Factory tire coverage
Formed and welded using Nemesis proprietary manufacturing techniques using hand built custom tooling
Seamless finish
Inspected for precision fit and finish to Nemesis high standards, fits right the first timeNotes
Skeletos upgrade available
Available in raw, black or textured powder coatInstallation
Installation can be handled by the average home installer, and can be completed in three hours for the pair, using basic hand tools and a drill.
SKU: 126410-HCQS$774.00