Dana 30 Front Axle Kit 27 Spl 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 98-2050-001
G2 offers a full line of high strength 4340 chrome/nickel (Chromoly) axles designed to handle the punishment of off-road driving, increased loads of oversized tires and the high torque produced by the ultra low geared vehicles. These axles are forged from high tensile strength 4340 alloy with particular attention paid to key weak areas of the original design. Additional material is added to the yoke area surrounding the u-joint cap to prevent distortion leading to damaged bearings.
Details:
- Front Axle Kit
- Dana 30
- 27 Spline
- Machined For Full Circle Snap Rings
- Uses 5-760X Joint
- For Use In 2007-2009 Jeep Wrangler JK Non Rubicon
$699.99
Related products
-
Axle Shafts
Dana 30 Outer Axle Shaft 32 Spl LH Side 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 97-2050-001
Axle ShaftsDana 30 Outer Axle Shaft 32 Spl LH Side 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 97-2050-001
0 out of 5(0)G2 high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
Details:- G2 Axle and Gear Chromoly Outer Axle Shaft Dana 30 JK
- 32 Spline
- 6.25in. Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 2007-2009 Jeep JK Non Rubicon
SKU: 97-2050-001$129.99 -
Axle Shafts
Dana 30 Inner Axle Shaft 27 Spl LH Side 07-09 Wrangler JK Large U Joint G2 Axle and Gear 97-2050-005
Axle ShaftsDana 30 Inner Axle Shaft 27 Spl LH Side 07-09 Wrangler JK Large U Joint G2 Axle and Gear 97-2050-005
0 out of 5(0)G2 high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
Details:- G2 Axle and Gear Chromoly Inner Axle Shaft
- Dana 30
- 27 Spline
- 18.80in.Overall Length
- Accepts 5-7166X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 2007-2009 Jeep JK Front Dana 30 Non Rubicon Driver Side
SKU: 97-2050-005$179.99 -
Axle Shafts
Dana 44 Replacement Axle Shaft LH/RH 30 Spl 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 95-2052-1
Axle ShaftsDana 44 Replacement Axle Shaft LH/RH 30 Spl 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 95-2052-1
0 out of 5(0)G2 high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
Details:- G2 Axle and Gear Jeep JK Dana 44 Replacement Axle
- Forged 1541H Steel
- 31.50in. Overall Length
- 30 Spline
- Brake Pilot Surface 2.828in.
- Bearing 1.565in.
- 5 on 5in.
- LH/RH
- For use in 07-09 Jeep JK
SKU: 95-2052-1$149.99 -
Axle Shafts
Dana 30 Inner Axle Shaft 27 Spl LH Side 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 97-2050-003
Axle ShaftsDana 30 Inner Axle Shaft 27 Spl LH Side 07-09 Wrangler JK Non Rubicon G2 Axle and Gear 97-2050-003
0 out of 5(0)G2 high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
Details:- G2 Axle and Gear Chromoly Inner Axle Shaft
- Dana 30
- 27 Spline
- 18.80in. Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 2007-2009 Jeep JK Front Dana 30 Non Rubicon Driver Side
SKU: 97-2050-003$179.99 -
Axle Shafts
Dana 44 Outer Axle Shaft 32 Spl LH Side 07-09 Wrangler JK Rubicon G2 Axle and Gear 97-2051-001
Axle ShaftsDana 44 Outer Axle Shaft 32 Spl LH Side 07-09 Wrangler JK Rubicon G2 Axle and Gear 97-2051-001
0 out of 5(0)G2 high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
Details:- G2 Axle and Gear Chromoly Outer Axle Shaft
- Dana 44
- 32 Spline
- 6.25in. Overall Length
- Accepts 5-7166X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 2007-2009 Jeep JK Rubicon and non Rubicon With Upgraded Aftermarket Axles
SKU: 97-2051-001$129.99