Rock Jock Dana 60 Rear Axle Assembly 5.38 Ratio 35 Spl Axels W/Eaton E Locker 07-Pres Wrangler JK G2 Axle and Gear JKRJRS538E
If you are looking for the toughest axle assembly for your Jeep, G2 and Currie Enterprises have come together to offer you these custom built to order Rock Jock assemblies. These axles feature Curries famous high pinion Ductile iron center section with its rotated cover design and replaceable skid plate for the ultimate in protection. The internals feature top shelf lockers and gears with Timken bearings and National seals. These assemblies feature bullet proof 1 1/2in. 35 spline Chromoly axle shafts for the ultimate in strength and durability.
Details:
- 2007 to 2016 Rock Jock Dana 60 Rear High Pinion Axle Assembly
- 5.38 Gear Ratio
- Eaton E Locker
- Currie 35 Spline Axle Shafts
- Dual Bolt Pattern 5 on 5 and 5 on 5.5
- Accepts Factory Brakes And Wheel Sensors
- 1350 Series Yoke
- Ductile Iron Housing Center Section
- AR 400 Heat Treated Bottom Skid Plate
- 3 inch D.O.M. Steel Tubes
- May Require Driveshaft Modifications
$4,099.99
Related products
-
Axle Assembly
G2 Core 44 Rear 4.88 32 Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JMR488TC2
Axle AssemblyG2 Core 44 Rear 4.88 32 Spl W/Detroit True Trac 07-Pres Wrangler JK G2 Axle and Gear C4JMR488TC2
G2 Axle & Gear is proud to introduce our new CORE 44 axle housing for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation Dana 44 JK 8.8in. gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and Chromalloy axle shafts for the strongest Dana 44 available.
Details:- JK Rear with 4.88 gear ratio and Detroit Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- 4340 Chromalloy 32 spline axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMR488TC2 -
Axle Assembly
G2 Core 44 Front Axle Assembly No Caster 5.13 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFS513MP5
Axle AssemblyG2 Core 44 Front Axle Assembly No Caster 5.13 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFS513MP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 Placer Gold USA made 35 spline Chromalloy axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 5.13 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- Standard axle caster for 0-4 inch lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFS513MP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly No Caster 5.38 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFS538AP5
Axle AssemblyG2 Core 44 Front Axle Assembly No Caster 5.38 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFS538AP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 Placer Gold USA made 35 spline Chromalloy axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 5.38 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- Standard axle caster for 0-4 inch lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFS538AP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly W/Caster 4.56 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFL456MP5
Axle AssemblyG2 Core 44 Front Axle Assembly W/Caster 4.56 W/Auburn Ected 07-Pres Wrangler JK G2 Axle and Gear C4JMFL456MP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6in. and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 4.56 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3 Degrees extra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
SKU: C4JMFL456MP5 -
Axle Assembly
G2 Core 44 Front Axle Assembly W/Caster 5.38 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFL538AP5
Axle AssemblyG2 Core 44 Front Axle Assembly W/Caster 5.38 W/ARB Air Locker 07-Pres Wrangler JK G2 Axle and Gear C4JMFL538AP5
G2 Axle & Gear is proud to introduce our new CORE 44 axle assemblies for 2007 and up Jeep JK Wranglers. This housing has additional caster built into it to accommodate lift kits of 6in. and up. This will allow for better pinion angles while retaining proper caster settings.Utilizing the strongest and latest generation high pinion 8.8in. Dana 44 gear design, we have developed a whole new housing to handle the heavy loads that would normally bend a stock Dana 30 or Rubicon Dana 44. Then we stuff this heavy duty axle housing full of the best aftermarket components available like lockers of your choice and G/2 USA made Placer Chromalloy 35 spline axle shafts for the strongest Dana 44 available.
Details:- JK High Pinion Front with 5.38 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- 3 Degrees extra axle caster for 6in. and up lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
SKU: C4JMFL538AP5