Drive Shaft
Rubicon Express Drive Shaft Package for 12-17 JK Wrangler Unlimited and Rubicon Unlimited (Manual Trans) and 07-11 JK Wrangler Unlimited and Rubicon Unlimited – JK1802
Prevent driveline vibration after you lift your Jeep JK with our Dana Spicer 1310 CV style JK driveshafts. Designed to replace the factory shafts and to be ran with our replacement yoke and flange for the transfer case. Built for daily driving and the demands of off roading. Driveshaft lengths are for factory gasoline motors.
Technical Details
- Fits 2012 to 2018 JK Wrangler Unlimited and Rubicon Unlimited
- 4-door models
- Manual transmission
- Fits 2007 to 2011 JK Wrangler Unlimited and Rubicon Unlimited
- 4-door models
- Manual or automatic transmission
- Includes front and rear drive shafts and yoke flanges
- 1310 U-joints
- Dynamically balanced to eliminate vibration
- Available from 15.5 to 38.5 inches long
- Recommended in vehicles with 3.5 inches or more of lift
- Billet aluminum flange
$988.99
Related products
-
Drive Shaft
Rubicon Express CVF Drive Shaft Rear 36.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-365
Drive ShaftRubicon Express CVF Drive Shaft Rear 36.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-365
TJ CVF Rear Drive Shaft. Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 36.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-365 -
Drive Shaft
Rubicon Express CVF Drive Shaft Rear 33.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-335
Drive ShaftRubicon Express CVF Drive Shaft Rear 33.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-335
TJ CVF Rear Drive Shaft. Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 33.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-335 -
Drive Shaft
Rubicon Express CVF Drive Shaft Rear 39.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-395
Drive ShaftRubicon Express CVF Drive Shaft Rear 39.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-395
TJ CVF Rear Drive Shaft. Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 39.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-395 -
Drive Shaft
Rubicon Express CVF Drive Shaft Rear 24.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-245
Drive ShaftRubicon Express CVF Drive Shaft Rear 24.5 Inch Flange Style Slip Yoke Elminator Only W/PN RE1801/RE1807 – RE1898-245
TJ CVF Rear Drive Shaft. Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 24.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-245 -
Drive Shaft
Rubicon Express CVF Drive Shaft 26.5 Inch W/PNRE1801/RE1807 Flange Style Slip Yoke Elminator Only – RE1898-265
Drive ShaftRubicon Express CVF Drive Shaft 26.5 Inch W/PNRE1801/RE1807 Flange Style Slip Yoke Elminator Only – RE1898-265
CVF Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1807, RE1801 Slip yoke eliminator kits and Currie Enterprises tail shaft conversion kits. Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of its travel. measure your vehicle on the ground in the running position to get correct length.
Details:- 26.5 inch long
- For use with part number RE1801 and RE1807
- Will only work on flange style slip yoke eliminator
SKU: RE1898-265