Category: Winch Fairlead
Tags: Winch & Recovery, Winch Accessories, Winch Fairlead
Brand: Smittybilt
Winch Fairlead
Roller Fairlead Low Profile 4 Way Smittybilt – 2810
This roller fairlead guides your wire rope onto the drum and protects it by reducing friction and excessive wear on winch cables or wire ropes, especially during high angle pulls. It is easy to install and works with all standard winch plates.
Details:
- Low Profile
- 4 rollers
- Fits standard winch plates
- All mounting hardware included
$51.99
Related products
-
D Ring Shackle
Soft Shackle Rope 7/16 Inch X 6 Inch Smittybilt – 13051-B
Smittybilt is now offering one of the quietest feature rich tops on the market. Each top starts off with one of the thickest gel coats available then hand laid using only the finest materials. Each top is lined with a military spec mildew free carpet liner which delivers one of the quietest rides available. OE Style latches and rear mounting hardware makes this top an easy install ?Çö no drilling or modifications to your vehicle. When youre looking for the quietest and highest quality top ever produced looked to Smittybilt to have you covered up!
Details:- Fits 1997 to 2006 TJ Wrangler and Rubicon
- Color: Black
- Manufactured from honey comb hand-laid fiberglass for extra strength and rigidly
- Contoured DOT approved safety glass – 31 percent Tint
- Thickest UV stable gel coat available
- Textured grain finish complimenting the looks of todays Wranglers
- De-Tuned air vent
- Rack ready mounting system
SKU: n/a -
D Ring Shackle
D-Ring 7/8 Inch 6.5 Ton Rating Black Smittybilt – 13048B
The ultimate in Comfort and Style! Plush vinyl or full fabric covering and contoured bucket seats assure total comfort. Unlimited recline positions and adjustable headrest keeps you alert, yet comfortable. Mounts to your factory seat slider and bracket. Available with leather grain vinyl or fabric seating surfaces. Seat adapters are required for installation in 1997-02 TJ Wranglers.
Details:- Fits 1976 to 2018 Wrangler and CJ
- Gray Denim
- Contoured bucket seat
- Unlimited recline positions with adjustable headrest
- 1997 and newer models require adapter brackets
- Hardware not included
SKU: n/a -
Winch Fairlead
Roller Fairlead 4 Way Smittybilt – 97281-47
This roller fairlead guides your wire rope onto the drum and protects it by reducing friction and excessive wear on winch cables or wire ropes, especially during high angle pulls. It is easy to install and works with all standard winch plates.
Details:- Mounts directly to all standard winch mounting plates
- Reduces excessive wear on your winch cable or wire rope
SKU: n/a -
Winch Fairlead
Zeon Winch Spacer Plates Poison Spyder – 45-57-010-03
Zeon Winch Spacer Plates. Use these Spacer Plates when mounting a Warn Zeon Winch on to your Poison Spyder Brawler Lite, Brawler Mid, or JK RockBrawler front bumper. On these bumpers, the slight recess along the top surface of the bumper is just slightly incompatible with the extra wide, low housing ends on the Zeon winches.
Simply lifting the winch about an extra 1/8 inch solves this problem. These spacers are a convenient way to do that, by simply placing them between the winch and the fairlead mount to provide the lift needed. CNC laser cut from 3/16 inch plate steel, powdercoated black.
Features:- CNC laser cut 3/16 plate steel
- Provides extra height needed to mount Zeon winches with certain bumpers
- Semi-gloss black powdercoat finish
- Important: Brawler Mid Front Bumpers will require Two pairs of spacer plates to install the Warn Zeon winch.
SKU: 45-57-010-03-PSC -
Winch Fairlead
Hawse Offset Fairlead 1.5 Inch Thick Factor 55
Factor 55 introduces a new Aluminum Hawse Offset Fairlead. These 1.5 inch fairleads are CNC machined from 1.5 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick.
The thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope. The Offset fairleads are the industry’s first Hawse Offset fairlead compatible with larger 1/2 inch diameter rope tube thimbles.The rope slot height opening is taller to allow the larger 1/2 inch tube thimbles to pass through. There is also a machined outer corner chamfer to reduce rope stress for those than plan on using the winch as a front suspension suck down device. These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a laser engraved logo.
What is the best surface finish for Hawse aluminum fairleads? Without a doubt it is a Type III hard anodized coating. Not cosmetic Type II anodized finishes, not powder coated, and not raw or polished aluminum.Why? Because a hard coating can resist the abrasion damage from a dirty/gritty synthetic winch rope rubbing across it. Especially during extreme side pulls where rope fiber stresses are extremely high. A Mil-A-8625 Type III hard anodized finish leaves a .002 inch thick Al2O3 ceramic coating that is in the top 5 hardest materials known to mankind (See chart under Corundum/Sapphire). Not too far away from diamond hardness actually. Another valuable material property from hard anodized coatings are the low coefficients of friction. Low friction = lower rope heat.
Only drawback? Hard anodizing is not offered in typical bright and fancy anodized colors. All Factor 55 fairleads only come in Mil-A-8625 hard gray finishes. Not fancy, but it is the proper finish to extend the life of your synthetic rope.
Features:
Size:1.5 inch
Overall Dimension: 11.75 x 3.25 inch
Offset Opening: .80 inch
Thickness: 1.5 inch
For synthetic winch rope only.SKU: 00026--GGBW
