Category: Transfer Case Skid Plate
Tags: Armor, Bumpers & Armor, Exterior Parts & Car Care, Skid Plates
Brand: Smittybilt
Transfer Case Skid Plate
XRC 07-18 Wrangler JK Skid Plate Transfer Case Smittybilt – 76920
When wheeling off road you can never have too much protection. The new Smittybilt skid plates are designed to provide the ultimate protection for essential components. Each skid plate is manufactured out of thick 3/16 steel to take hard hits on the trail. They are precision laser cut for a perfect fit and come with quality hardware for an easy bolt-on installation. No drilling required.
Details:
- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Made of 3/16 Inch steel for added armor
- Transfer skid plates mount solidly to the Jeep Foots frame using the factory hardware
- Specially designed for easy bolt-on installation
- No drilling is required for a 100 percent completely bolt-on installation
- Precision laser cut for exacting fit
$128.99
Related products
-
Front Bumper Skid Plates
JK Brawler MID Front Skid Poison Spyder – 17-63-030
0 out of 5(0)JK Brawler Mid Front Skid for Jeep Wrangler JK 2007-2016. The JK Brawler Mid Front Skid is an optional addition to the JK Brawler Mid Front Bumper. This skid attaches to the bottom of the Brawler Mid bumper to conceal and protect the Stock crash bar, plus it has an extension to protect the electronic swaybar disconnect motor found on Rubicon JKs. The skid is made of CNC laser-cut 3/16 inch plate steel, precision brake-formed for a precise fit to the Brawler Mid front bumper.
This product ships as bare steel. It will need to be painted or powdercoated prior to final installation. We do Not offer a powdercoat option for this item.
Features:- Bolts to bottom of Poison Spyder JK Brawler Mid Front Bumpers (sold separately)
- Covers factory crash bar and protects Stock Jeep electrical swaybar disconnect mechanism
- CNC laser cut from 3/16 plate steel
- Precision brake-formed for a perfect fit
SKU: 17-63-030-PSC$258.99 -
Hitches
Ball Mount Adjustable 10 Inch Drop Aluminum Smittybilt – 2940
0 out of 5(0)Constructed with new space age fabric, Climate Cover protects your vehicle from the elements while allowing the paint to breathe. Soft and durable fabric pampers paint finish and protects from sun, dirt, dust, moisture and pollution. The unique diamond bond pattern allows damaging trapped air and moisture to escape preventing paint deterioration. UV protection against sun and heat buildup and the spun bond polypropylene is a naturally water repellent material. Double stitched elastic hems for a custom fit. Gray with heavy-duty grommets. Bag, lock and cable included.
Details:- Fits 1955 to 2006 Wrangler and CJ
- Gray
- Protects your vehicle from the elements
- Soft and durable fabric
- UV protection against sun and heat buildup
- Naturally water repellent material
- Double stitched elastic hems
- Bag included
SKU: n/a$92.99 -
Hitches
Trailer Hitch Ball Mount 10 Inch Drop Smittybilt – 2910
0 out of 5(0)Constructed from 100 percent durable Neoprene and Codura materials for long life and the ultimate in protection. Center section is padded and pleated for comfort and seat protection. The front covers include a rear map pocket on them and they are easy to install with no tools required. Available in Black/Black, Black/Gray, Black/Tan and Black/Red. Seat covers are machine washable in gentle cold and hang to dry.
Details:- Fits 2003-2006 Wrangler TJ
- Purchase a pair of neoprene front seat covers and receive the matching neoprene rear seat covers for free
- Kit includes front and rear covers
- Black/Charcoal
- 100 percent neoprene
- Center section is padded and pleated for comfort
- Slip on installation no tools required
SKU: n/a$30.99 -
Hitches
Ball Mount Adjustable 6 Inch Drop Aluminum Smittybilt – 2936
0 out of 5(0)Includes hood catches, hood hinges, windshield tie down kit and hood vent. Add style to your Jeep without breaking the bank! Stainless Steel and Black Powder Coat accessories are high-quality products that are reasonably priced. And easy to care for too! The Stainless Steel requires only an occasional waxing to keep their mirror like shine. Accessories include all mounting hardware.
Details:- Fits 1978 to 1995 YJ Wrangler and CJ
- Black
- Accessories include all mounting hardware
SKU: n/a$61.99 -
Uncategorized
JK Extreme Duty Trans-Mount Crossmember 07-11 Poison Spyder – 18-56-020
0 out of 5(0)JK Extreme Duty Trans-Mount Crossmember 07-11. Replace your JKs weak Stock transmission crossmember with the Poison Spyder Extreme Duty Crossmember! This ultra-beefy crossmember is constructed of two pieces of CNC laser cut, precision brake-formed 3/16 inch plate steel. Check out the damaged Stock crossmember in the photos below. When getting high-centered on the rocks, with the entire 5,000+ pounds of a trail-ready JK resting entirely on the crossmember, it can tend to bend upward in the Middle, or as we say, Taco. The double-wall sides of the Poison Spyder Extreme Duty Crossmember put the extra strength where its needed Most to prevent the Taco-effectin the side walls of the crossmember.
Features:- Fabricated entirely of high strength 3/16 plate steel, CNC laser cut and precision brake-formed
- Replaces flimsy Stock crossmember, which is typically beat up beyond recognition after just moderate trail use
- Built to Stock crossmember outside dimensions with mounting points in Stock locations
- Compatible with Stock skid plates and aftermarket skid plates that use Stock mounting points
The 3/16 inch (.188 inch thick) top plate and bottom plate provide far superior protection against dents and bends than the Stock crossmember, which is made of a piece of 1/8 inch (.125 inch thick) and 14-gauge (.083 inch thick) stamped sheetmetal. Incredibly, the Chrysler engineers decided to put the much thinner 14-gauge piece along the bottom, making it crumple at the mere sight of rocks. The steel used in the Poison Spyder crossmember is 33 percent thicker on the top plate, and 2.5 times thicker on the bottom plate. And the 3/16 inch steel plate of the Poison Spyder Extreme Duty Crossmember has brake-formed corners all the way aroundthere are no welds on the box corners.
Inside the crossmember, Poison Spyder fabricators have welded in four DOM tubing spacers to provide crush-proof strength at the crossmember mounting bolt locations. These are made of .120 inch wall DOM tubing. Compare that to the Stock crossmember, which uses stamped sheet metal spacers.
The Poison Spyder Extreme Duty Crossmember matches the external dimensions and bolt locations of the Stock crossmember. All Stock skid plates that were attached to the Stock crossmember attach to the Poison Spyder Extreme Duty Crossmember. Any other manufacturer aftermarket skid plate system that attached to the Stock crossmember should still attach to the Poison Spyder Extreme Duty Crossmember.
The Poison Spyder Extreme Duty Crossmember is shipped as bare steel, ready for you to paint or powdercoat in the color of your choice. This part number is for year model 2007-2011 JKs, both 2-door and 4-ddor, with either manual or automatic transmission.SKU: 18-56-020-PSC$209.99