Jeep Parts Shop & Accessories Online
Showing 2433–2464 of 3661 results
-
Steering Stabilizer
Rough Coutry Dual Steering Stabilizer for 2-6-inch Lifts 87349
Steering stabilizers are designed to restrain “bump steer” and front end vibration, giving added life to tires, ball joints, and other steering components.
Rough Country’s Dual Steering Stabilizer for 2-6-inch Lifts – 87349
SKU: 87349 -
-
Exhaust
Rough Coutry Exhaust Loop Relocation Pipe 1041
New model JK’s saw a change in the exhaust design. The new factory location leaves very little clearance for the larger Long Arms and can make contact. Rough Country’s new Loop Exhaust Kit allows new Wranglers to experience the power of our Long Arm Kit by offering a very clean work around that allows maximum flex and keeps everything cleanly tucked out of the way. This kit is included in all 2012 and newer Rough Country JK Long Arm Kits.
Rough Country’s Exhaust Loop Relocation Pipe – 1041
SKU: 1041 -
Exhaust
Rough Coutry Exhaust Y-Pipe Assembly 1040
Stock exhaust pipes on JK’s lifted more than 2-inches can make contact with the front drive shaft during downward suspension travel. Our aftermarket Y-pipe eliminates this problem by replacing part of your exhaust system with a design more suitable for Off-Road use. Once installed, this kit offers more clearance between the exhaust and front drive shaft protecting both crucial components and giving you more peace of mind. You have enough to worry about on the trails, your exhaust shouldn’t be one of them.
Rough Country’s Exhaust Y-Pipe Assembly – 1040
SKU: 1040 -
Ring & Pinion
Rough Coutry Front & Rear D44 5.13 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) 414444513
Ring & PinionRough Coutry Front & Rear D44 5.13 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) 414444513
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Combo kits. Our durable aftermarket gear upgrade combo kits come with everything you need to regear the front and rear of your vehicle and breathe new life into your lifted Jeep.
Ring and Pinion Gears help your vehicle take power supplied from the drive shaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Each kit includes a full set of front and rear ring and pinion sets along with front and rear master install kits, including: carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kits, pinion nuts, crush sleeves (select models) oil baffles and slingers (select models), thread locking compound, marking compound, brush and gasket sealing compound – everything you need in one, easy kit!
Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Front & Rear D44 5.13 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) – 414444513
SKU: 414444513 -
Ring & Pinion
Rough Coutry Front & Rear D44 5.38 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) 414444538
Ring & PinionRough Coutry Front & Rear D44 5.38 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) 414444538
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Combo kits. Our durable aftermarket gear upgrade combo kits come with everything you need to regear the front and rear of your vehicle and breathe new life into your lifted Jeep.
Ring and Pinion Gears help your vehicle take power supplied from the drive shaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Each kit includes a full set of front and rear ring and pinion sets along with front and rear master install kits, including: carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kits, pinion nuts, crush sleeves (select models) oil baffles and slingers (select models), thread locking compound, marking compound, brush and gasket sealing compound – everything you need in one, easy kit!
Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Front & Rear D44 5.38 Gear Sets w/ Install Kits (07-18 Wrangler Rubicon JK / JKU) – 414444538
SKU: 414444538 -
Ring & Pinion
Rough Coutry Front D30 & Rear D44 4.56 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044456
Ring & PinionRough Coutry Front D30 & Rear D44 4.56 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044456
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Combo kits. Our durable aftermarket gear upgrade combo kits come with everything you need to regear the front and rear of your vehicle and breathe new life into your lifted Jeep.
Ring and Pinion Gears help your vehicle take power supplied from the drive shaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Each kit includes a full set of front and rear ring and pinion sets along with front and rear master install kits, including: carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kits, pinion nuts, crush sleeves (select models) oil baffles and slingers (select models), thread locking compound, marking compound, brush and gasket sealing compound – everything you need in one, easy kit!
Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Front D30 & Rear D44 4.56 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) – 403044456
SKU: 403044456 -
Ring & Pinion
Rough Coutry Front D30 & Rear D44 4.88 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044488
Ring & PinionRough Coutry Front D30 & Rear D44 4.88 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044488
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Combo kits. Our durable aftermarket gear upgrade combo kits come with everything you need to regear the front and rear of your vehicle and breathe new life into your lifted Jeep.
Ring and Pinion Gears help your vehicle take power supplied from the drive shaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Each kit includes a full set of front and rear ring and pinion sets along with front and rear master install kits, including: carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kits, pinion nuts, crush sleeves (select models) oil baffles and slingers (select models), thread locking compound, marking compound, brush and gasket sealing compound – everything you need in one, easy kit!
Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Front D30 & Rear D44 4.88 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) – 403044488
SKU: 403044488 -
Ring & Pinion
Rough Coutry Front D30 & Rear D44 5.13 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044513
Ring & PinionRough Coutry Front D30 & Rear D44 5.13 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) 403044513
Increase your lifted Jeep’s performance and take your rock crawling experience to a whole, new level with Rough Country’s Ring & Pinion Combo kits. Our durable aftermarket gear upgrade combo kits come with everything you need to regear the front and rear of your vehicle and breathe new life into your lifted Jeep.
Ring and Pinion Gears help your vehicle take power supplied from the drive shaft and push it out to through the axle shafts to the wheels. Once a lift and larger tires are installed, however, the factory gear ratio is off, resulting in a slower-turning driveshaft and engine. This weakened power state can rob your vehicle’s performance and even your fuel economy. By upgrading to Rough Country gears, you’ll gain the ability to tame your larger, aftermarket tires as if they were stock height, while increased power and torque affords you unparalleled power in off-road or rock crawling situations.
Each kit includes a full set of front and rear ring and pinion sets along with front and rear master install kits, including: carrier bearings and races, pinion bearings and races, pinion seal, ring gear bolts, deluxe shim kits, pinion nuts, crush sleeves (select models) oil baffles and slingers (select models), thread locking compound, marking compound, brush and gasket sealing compound – everything you need in one, easy kit!
Best of all, Rough Country Gears include an 10-Year Manufacturer’s Warranty guaranteeing your gears to be free of manufacturer’s defects for over a decade!
Rough Country’s Front D30 & Rear D44 5.13 Gear Set w/ Install Kits (07-18 Wrangler JK / JKU) – 403044513
SKU: 403044513 -
Differential Skid Plate
Rough Coutry Front Dana 30 Differential Skid Plate 797
This durable, 1/4-inch plate steel Skid offers unbeatable protection for the underside of your Jeep. Go further off-road and free yourself from worry with this easy-to-install skid plate. Keep your Diff in top shape, even on the roughest terrain, while reinforcing the existing differential housing!
Rough Country’s Front Dana 30 Differential Skid Plate – 797
SKU: 797 -
Differential Skid Plate
Rough Coutry Front Dana 44 Differential Skid Plate 798
This durable, 1/4-inch plate steel Skid offers unbeatable protection for the underside of your Jeep. Go further off-road and free yourself from worry with this easy-to-install skid plate. Keep your Diff in top shape, even on the roughest terrain, while reinforcing the existing differential housing!
Rough Country’s Front Dana 44 Differential Skid Plate – 798
SKU: 798 -
Brake Lines
Rough Coutry Front Extended Stainless Steel Brake Lines for 4-6-inch Lifts 89707
Upgrade your worn out rubber brake lines with Rough Country’s Extended Stainless Steel Brake Line Kit. Our DOT approved brake line kits offer the necessary extra length to install your application, perfect for anyone who wants to swap out poor performing or decaying factory brake lines.
Rough Country’s Stainless Steel replacements offer superior protection and a seriously long lifespan. A braided stainless steel exterior keeps your lines free from off-road debris, rocks, and mud that can penetrate factory rubber lines. This durable outer layer also prevents expansion of the internal Teflon layer – even under 4,000PSI – keeping fluid moving to the brake line for a noticeably firmer brake pedal feel. High-quality hollow fasteners at both ends of each brake line provide a leak-free flow path.
Rough Country’s Front Extended Stainless Steel Brake Lines for 4-6-inch Lifts – 89707
SKU: 89707 -
Front Bumpers
Rough Coutry Front Hybrid Stubby Bumper 1059
In a perfect world, JK owners would combine the durability and strength of a winch bumper with the affordability and low weight of a winch plate. Thanks to Rough Country, you can live in that world with the all-new JK Hybrid Stubby with recessed winch mount. Utilizing an innovative design scheme, Rough Country’s Research and Development Team has produced a new type of winch bumper that borrows the best from both sides while remaining easy to install and easy on your wallet.
The JK Hybrid Stubby features a 3/16-inch thick plate steel center with an integrated winch mount. Two steel end caps help further protect the winch, partially encasing it – but the real success of this design lies in the fact that these end caps are removable, offering plenty of clearance to easily install or remove the winch. Mount your fairlead to the outside and the result is an easy-to-install winch protection system. Best of all, The JK Hybrid Stubby weighs in at a mere 40-lbs! How’s that for not bogging you down?
This winch bumper is a true stubby. Utilizing the JK’s factory bumper mounts and tow hooks, it spans no further than the frame horns and rests below the radiator shroud. Install this bumper and i-mmediately gain greater tire clearance and better approach angles. And with it’s sleek Carbon Black Powder coat and aggressive looks, The Hybrid Stubby is prepared to withstand the elements while generating a lot of head-turning on the trails. Be ready to answer a lot of curious cruisers’ questions!
Rough Country’s Front Hybrid Stubby Bumper – 1059
SKU: 1059 -
Front Bumpers
Rough Coutry Front Hybrid Stubby Bumper with Integrated Fog Light Mounts 1062
In a perfect world, JK owners would combine the durability and strength of a winch bumper with the affordability and low weight of a winch plate. Thanks to Rough Country, you can live in that world with the all-new JK Hybrid Stubby w/ Integrated Fog Light Mounts. Utilizing an innovative design scheme, Rough Country’s Research and Development Team has produced a new type of winch bumper that borrows the best from both sides while remaining easy to install and easy on your wallet.The JK Hybrid Stubby features a thick plate steel center with an integrated winch mount. Two steel end caps with integrated fog light mounts help further protect the winch, partially encasing it – but the real success of this design lies in the fact that these end caps are removable, offering plenty of clearance to easily install or remove the winch. Mount your fairlead to the outside and the result is an easy-to-install winch protection system. Best of all, The JK Hybrid Stubby weighs in at a mere 40lbs! How’s that for not bogging you down?This winch bumper is a true stubby. Utilizing the JK’s factory bumper mounts and tow hooks, it spans no further than the frame horns and rests below the radiator shroud. Install this bumper and immediately gain greater tire clearance and better approach angles. And with it’s sleek Carbon Black Powder coat and aggressive looks, The Hybrid Stubby is prepared to withstand the elements while generating a lot of head-turning on the trails. Be ready to answer a lot of curious cruisers’ questions, especially when you tell them it retails for only $229.95!
SKU: 1062 -
Control Arm Skid Plate
Rough Coutry Front Lower Control Arm Skid Plates (Pair) 792
These durable, 3/16-inch plate steel Skids offer unbeatable protection for the underside of your Jeep. Go further off-road and free yourself from worry with this easy-to-install skid plate. Maneuver over rocks you may not have dared before, and obliterate off-road obstacles with ease knowing that Rough Country has your control arms covered. With many off-road hazards, your vehicle is always prone to slide, smash, grind, or bang against the terrain before you. Our Control Arm Skids give extra protection where it counts, ensuring a longer lifespan for your arms and helping avoid costly damages!
With Rough Country’s JK Armor you can shield your Jeep for a fraction of the cost other manufacturers charge!
Rough Country’s Front Lower Control Arm Skid Plates (Pair) – 792
SKU: 792 -
Control Arms
Rough Coutry Front Lower X-Flex Adjustable Control Arms 11360
With their ball-in joint, massive 2.5-inch diameter body, and huge 1.25-inch threads, these X-Flex Joints offer considerable range, strength, and safety for off-road applications. Rough Countrys X-Flex Joints now also feature Adjustable Retainer Rings, allowing you to preload the bushings by compressing them prior to install. A threaded chamber inside the housing offers the ability to modify the amount of compression on the bushings and friction on the spherical ball at any given time by simply adjusting the end retainer ring using our included adjustment tool.
These upgrades drastically extend the longevity of the joints themselves since they are completely rebuildable for easy maintenance and adjustments. A few quick twists and your joints will be as tight as the day you installed them. Upper Arm X-Flex joints pivot up to twenty degrees, while Lower Arm Joints are capable of a staggering thirty-five Degrees pivot range.
Rough Country’s Front Lower X-Flex Adjustable Control Arms – 11360
SKU: 11360 -
Shock Absorber Relocaton Bracket
Rough Coutry Front Shock Relocation Brackets 1020
The Jeep Wrangler JK is one of the most capable off-road vehicles ever built – Add a lift kit and it can handle just about anything! However, the designers didn’t leave a lot of room for the front shocks at the frame, which can cause certain shocks to make contact during instances of extreme flex. Don’t risk damaging expensive aftermarket shocks!
Rough Country’s front shock relocation brackets for the JK move the body of the shock 2.375-inches away from the frame, providing an inexpensive, and easily installed, solution to an all too common problem. These shock relocation brackets will allow you to run inverted shocks, or shocks with a larger diameter body, without risking any damage to a crucial part of your suspension!
Rough Country’s Front Shock Relocation Brackets – 1020
SKU: 1020 -
Differential Skid Plate
Rough Coutry Front Skid Plate 778
From the factory, Jeep JK’s ship with a cheap, plastic skid plate that’s laughable at best! Protect the front of your Jeep with this eye-catching, laser-cut front skid featuring the Rough Country logo.
Rough Country’s Front Skid Plate – 778
SKU: 778 -
Front Bumpers
Rough Coutry Front Stubby Winch Bumper w/ Black Series LED Lights 11831
Upgrade your Jeeps front bumper with the sleek, modern design of Rough Countrys JK Stubby LED Bumper. This uniquely designed bumper features a futuristic look that provides unbeatable front-end protection while the stubby design offers plenty of clearance for better approach angles.
This bumper features a set of integrated Rough Country 2 Flush-Mount LED Pods for powerful off-road lighting any time you need it. Add even more lighting with our optional LED Light Bar Hoop featuring a 20 Single-Row Rough Country LED. Choose Black Series or Chrome Series LEDs to match the look of your build.
This solid-steel bumper also features a handy winch plate to run any standard sized winch and includes a set of D-rings for easy recovery. The lower portion of the bumper features a laser-cut RC logo and mesh plates for head-turning good looks.
Rough Country’s Front Stubby Winch Bumper w/ Black Series LED Lights – 11831
SKU: 11831 -
Front Bumpers
Rough Coutry Front Stubby Winch Bumper w/ Chrome Series LED Lights 11830
Upgrade your Jeeps front bumper with the sleek, modern design of Rough Countrys JK Stubby LED Bumper. This uniquely designed bumper features a futuristic look that provides unbeatable front-end protection while the stubby design offers plenty of clearance for better approach angles.
This bumper features a set of integrated Rough Country 2 Flush-Mount LED Pods for powerful off-road lighting any time you need it. Add even more lighting with our optional LED Light Bar Hoop featuring a 20 Single-Row Rough Country LED. Choose Black Series or Chrome Series LEDs to match the look of your build.
This solid-steel bumper also features a handy winch plate to run any standard sized winch and includes a set of D-rings for easy recovery. The lower portion of the bumper features a laser-cut RC logo and mesh plates for head-turning good looks.
Rough Country’s Front Stubby Winch Bumper w/ Chrome Series LED Lights – 11830
SKU: 11830