Jeep Parts Shop & Accessories Online
Showing 3553–3584 of 3661 results
-
-
Body Armor
XRC Flat Armor Skins Front 07-18 Wrangler JK Black Textured Smittybilt – 76980
Smittybilt Foots all new XRC Armor Flat Armor Skins for Jeep JKs are manufactured from 3/16 Inch cold roll steel, and are hand crafted to insure a perfect fit every time. Each Flat Skin comes complete with everything you need to install these guards on your Jeep, including stainless steel hardware and detailed installation instructions. They are finished in a black powder coat and can be used with our XRC Armor Rocker Guards.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Made of 1/8 cold rolled steel to provide maximum protection
- Contours perfectly to the OE panels
- Ability to bolt the stock fenders back on
- Two-stage textured matte black finish
- Powder coat finish – 5 year limited warranty
- Drilling required for installation
- All mounting hardware included
- Sold as a pair
SKU: n/a -
-
Flat Fenders
XRC Flux Flares Front Pair 07-18 Wrangler JK Smittybilt – 76838
The new XRC flux flares are double-articulated tube fenders that provide extra outer tire clearance for larger tires under full suspension articulation.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Front flares
- CNC-bent 1.5 Inch diameter tubes covered with 1/8 Inch laser cut cold rolled sheet metal
- 6 Inch wide double articulation tube fenders, providing extra 3 Inch of suspension travel
- Provides extra outer tire clearance for larger tires under full suspension articulation
- 3/4 Inch LED turn signal lights included
- Minimal modification for installation
- Bolts to OE mounting points
- Spacers and brackets included for extra strength
- 2018erves factory inner liner
- Sold as a pair
SKU: n/a -
-
Flat Fenders
XRC Flux Flares Rear Pair 07-18 Wrangler JK Smittybilt – 76839
The new XRC flux flares are double-articulated tube fenders that provide extra outer tire clearance for larger tires under full suspension articulation.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Rear flares
- CNC-bent 1.5 Inch diameter tubes covered with 1/8 Inch laser cut cold rolled sheet metal
- 6 Inch wide double articulation tube fenders, providing extra 3 Inch of suspension travel
- Provides extra outer tire clearance for larger tires under full suspension articulation
- 3/4 Inch LED turn signal lights included
- Minimal modification for installation
- Bolts to OE mounting points
- Spacers and brackets included for extra strength
- 2018erves factory inner liner
- Sold as a pair
SKU: n/a -
-
Foot Pegs
XRC Foot Pegs 07-18 Wrangler JK Smittybilt – 7619
There Foots nothing like the freedom of Jeeping with the doors off. But when you want to kick back and enjoy the drive, it can be uncomfortable for your foot, even on the door sill. That Foots where the all new Smittybilt Jeep Foot Pegs come in! Made of quality 1/8 Inch CNC cut steel and coated in our signature series matte black textured powder coat, these foot pegs are both durable and stylish. Enjoy doors-off driving in style and comfort with the Smittybilt Foot Pegs.
Note: Always check your local laws and regulations before driving with the doors off.
Details:- Fits 2007-2018 Wrangler JK
- Includes spring to lock in the dome light switch
- Exclusive bolt engagement to
- eliminate flex and rattling
- Rubber trim gasket to reduce paint chip
- 1/8 Inch CNC steel construction
- Matte black textured powder coat
- Smittybilt Advantage Warranty
- Sold as a pair
SKU: n/a -
-
Flat Fenders
XRC Front Fenders 07-18 Wrangler JK Black Textured Smittybilt – 76880
The new line of XRC JK front fenders was specifically engineered to provide the protection and clearance needed when you Footre pushing your rig through the toughest conditions. Each piece of armor is manufactured out of 3/16 Inch cold rolled steel and then powder coated in Smittybilts signature series two stage matte black powder coat finish. Each fender is designed to be a complete bolt on with stainless steel fasteners and requires no modification to the vehicle.
All of the XRC Fenders come with an inner fender liner to keep mud, snow or any other debris out of the engine compartment and replaceable slide plates.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage matte black powder coat finish
- 3/16 Inch cold rolled steel
- Includes inner fender
- Stainless steel hardware
- No modification to vehicle required
- Sold as a pair
SKU: n/a -
-
Front Bumpers
XRC Front Jeep JK Bumper w/ Stinger Winch Plate D-Rings 07-18 Jeep JK Wrangler Black Powdercoat Smittybilt – 76806
Front BumpersXRC Front Jeep JK Bumper w/ Stinger Winch Plate D-Rings 07-18 Jeep JK Wrangler Black Powdercoat Smittybilt – 76806
Like all Smittybilt Jeep parts, the Smittybilt XRC Bumper line was engineered to provide maximum clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance, with 3/16-inch cold rolled steel bars robotically welded to the exact specifications. A two stage textured matte black powdercoat is then applied for the ultimate look. The front stinger is manufactured from 1.75-inch tubing and has 2 light tabs that could accommodate up to two 9-inch lights. Its unique design is capable of mounting up to 10,000 lb winch with the option of running an aluminum or roller fairlead. Each bumper was developed to be a complete bolt on and requires no modifications to your vehicle.
- XRC Front Bumper
- Manufactured from 3/16 inch cold rolled steel
- Includes winch plate for up to 12k winch and D-rings
- New solid D-ring mounts – welded on the inside and out
- One-piece welded design
- 2.0 inch .120 wall overrider and kickers
- Raised corners for better entry/exit under most extreme conditions
- Solid plate center section wraps frame horns and lower crossmember
- Built-in winch plate to accommodate up to a 15k winch
- Textured Matte Black Powdercoat Finish
- Powdercoat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Sold As Each
Fits:
- 2007-2018 Jeep JK Wrangler
- 2007-2018 Jeep JK Wrangler Unlimited
SKU: n/a -
-
Front Bumpers
XRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Black Powdercoat Smittybilt – 77807
Front BumpersXRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Black Powdercoat Smittybilt – 77807
Like all Smittybilt Jeep parts, the Smittybilt XRC Bumper line was engineered to provide maximum clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance, with 3/16-inch cold rolled steel bars robotically welded to the exact specifications. A two stage textured matte black powdercoat is then applied for the ultimate look. The front stinger is manufactured from 1.75-inch tubing and has 2 light tabs that could accommodate up to two 9-inch lights. Its unique design is capable of mounting up to 10,000 lb winch with the option of running an aluminum or roller fairlead. Each bumper was developed to be a complete bolt on and requires no modifications to your vehicle.
- XRC Gen2 Front Bumper
- Manufactured from 3/16 inch cold rolled steel
- Includes winch plate for up to 12k winch and D-rings
- New solid D-ring mounts – welded on the inside and out
- One-piece welded design
- 2.0 inch .120 wall overrider and kickers
- Raised corners for better entry/exit under most extreme conditions
- Solid plate center section wraps frame horns and lower crossmember
- Built-in winch plate to accommodate up to a 15k winch
- Textured Matte Black Powdercoat Finish
- Powdercoat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Sold As Each
Fits:
- 2018 Jeep JL Wrangler 2 Door/4 Door
SKU: n/a -
-
Front Bumpers
XRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Light Texture Black Powdercoat Smittybilt – 76807LT
Front BumpersXRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Light Texture Black Powdercoat Smittybilt – 76807LT
Like all Smittybilt Jeep parts, the Smittybilt XRC Bumper line was engineered to provide maximum clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance, with 3/16-inch cold rolled steel bars robotically welded to the exact specifications. A two stage textured matte black powdercoat is then applied for the ultimate look. The front stinger is manufactured from 1.75-inch tubing and has 2 light tabs that could accommodate up to two 9-inch lights. Its unique design is capable of mounting up to 10,000 lb winch with the option of running an aluminum or roller fairlead. Each bumper was developed to be a complete bolt on and requires no modifications to your vehicle.
- XRC Gen2 Front Bumper
- Manufactured from 3/16 inch cold rolled steel
- Includes winch plate for up to 12k winch and D-rings
- New solid D-ring mounts – welded on the inside and out
- One-piece welded design
- 2.0 inch .120 wall overrider and kickers
- Raised corners for better entry/exit under most extreme conditions
- Solid plate center section wraps frame horns and lower crossmember
- Built-in winch plate to accommodate up to a 15k winch
- Light-Textured Matte Black Powdercoat Finish
- Powdercoat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Sold As Each
Fits:
- 2018 Jeep JL Wrangler 2 Door/4 Door
SKU: n/a -
-
Front Bumpers
XRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Tan Powdercoat Smittybilt – 76807TAN
Front BumpersXRC Front Jeep JL Bumper w/ Stinger Winch Plate D-Rings 18-Present Jeep JL Wrangler Tan Powdercoat Smittybilt – 76807TAN
Like all Smittybilt Jeep parts, the Smittybilt XRC Bumper line was engineered to provide maximum clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance, with 3/16-inch cold rolled steel bars robotically welded to the exact specifications. A two stage textured matte black powdercoat is then applied for the ultimate look. The front stinger is manufactured from 1.75-inch tubing and has 2 light tabs that could accommodate up to two 9-inch lights. Its unique design is capable of mounting up to 10,000 lb winch with the option of running an aluminum or roller fairlead. Each bumper was developed to be a complete bolt on and requires no modifications to your vehicle.
- XRC Gen2 Front Bumper – Tan
- Manufactured from 3/16 inch cold rolled steel
- Includes winch plate for up to 12k winch and D-rings
- New solid D-ring mounts – welded on the inside and out
- One-piece welded design
- 2.0 inch .120 wall overrider and kickers
- Raised corners for better entry/exit under most extreme conditions
- Solid plate center section wraps frame horns and lower crossmember
- Built-in winch plate to accommodate up to a 15k winch
- Tan Powdercoat Finish
- Powdercoat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Sold As Each
Fits:
- 2018 Jeep JL Wrangler 2 Door/4 Door (Tan)
SKU: n/a -
-
Tire Carriers
XRC Gen2 Bolt on Tire Carrier 07-18 Wrangler JK Smittybilt – 76857
Add a tire carrier to your new Smittybilt Gen2 XRC/SRC Bumper to get bigger spare tires on your Jeep. This new tire carrier design bolts directly to the new XRC/SRC Gen2 Bumpers, and includes Roto Pax and CB antenna mounts.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two-stage textured matte black finish
- Manufactured from 3/16-inch cold rolled steel
- Bolt on design for XRC/SRC GEN2 bumpers
- Frame pivot point for added strength
- Tuned one handed opening operation, tuned to factory tailgate
- CB and Jack mount and Roto Pax gas can holder
- 5 year limited warranty
- will also fit the stock 10th anniversary bumper
SKU: n/a -
-
Front Bumpers
XRC Gen2 Front Bumper 07-18 Wrangler JK Smittybilt – 76807
The XRC Gen 2 Max Front Stubby Bumper has a high degree approach angle and raised corners to maximize ground clearance. The bumper is manufactured from 3/16 cold rolled steel and then robotically welded to the exact specifications. The solid D-ring mounts are welded on the inside and outside (D-rings sold separately). Welds are ground down and smoothed out, then a two stage textured matte black powder coat is applied for the ultimate look. The front stinger is 1.75 tubing and has light tabs that can hold up to two 9 Inch lights (lights sold separately). The bumper is winch ready and can carry winches up to a 10,000 lb. rating. The Gen 2 Front Bumper comes with fog light cutouts.
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- Two-stage textured matte black finish
- New Gen2 solid d-ring and jack point mount – welded on the inside and out
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- 1.75 Inch 120 Wall over rider and kickers
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- O.E. fog light provision
- Manufactured from 3/16 Inch cold rolled steel
- Tow-able D-ring mounts
- Powder coat finish with 5-year limited warranty
- Smittybilt Advantage lifetime warranty
SKU: n/a -
-
Rear Bumpers
XRC Gen2 Rear Bumper 07-18 Wrangler JK Smittybilt – 76858
With an updated look that is sure to be a hit with Jeep owners, the next generation XRC rear bumper was designed to meet the needs of off-road enthusiasts. The new bumper features raised corners that allow greater approach and departure angles ยยยรยยยรรถ perfect for vehicles running over sized tires. The redesigned solid D-ring mounts feature an integrated recovery point. The modular nature of the bumper allows you to add a tire carrier to the bumper (sold separately) S/B76857
Details:- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two-stage textured matte black finish
- New Solid D-Ring and Jack point Mount – Welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Aux back up light cut out provided
- Manufactured from 3/16-inch cold rolled steel
- Towable D-Ring mounts
- Powder Coat Finish – 5 Year Limited Warranty
- Smittybilt Limited Lifetime Warranty
- Modular design, Tire Carrier can be added in the future.
- Class III hitch for True towing
- Anti-rattle provision provided for Receiver hitch
- lights included
SKU: n/a -
-
Mounting brackets
XRC Light Bar 07-18 Wrangler JK Textured Black Windshield Top Smittybilt – 76911
Smittybilt Foots XRC light bar is an easy and simple way to Mount your 9 Inch lights or 50 Inch LED Light Bar and brighten up the night. Every XRC Light Bar features race inspired side supports manufactured out of a single solid piece of cold rolled steel. This is a complete bolt on and requires no drilling or modifications to the vehicle. The main cross bar is manufactured from 1.5 Inch race tubing that features 5 light tabs that can accommodate up to a 9 Inch light or a 50 Inch LED light bar and is completely adjustable.
Details:- Fits 2007-2018ent Wrangler JK
- Matte black
- 5 tab light bar
- Holds up to a 9 Inch light or a 50 InchLED lightbar
- Easy install-No Drill
SKU: n/a -
-
Jeep Hoods
XRC Lockable Hood Catch Smittybilt – 7682
Give your Jeep some added flash and panache with the Smittybilt Locking Hood Catch Kit. Smittybilt offers all the distinctive accessories you need to set your vehicle apart from the rest.
Details:- Fits 2007 to 2016 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Full aluminum construction
- Semi-gloss powder coat finish
- Sold as a pair
SKU: n/a -
-
Front Bumpers
XRC M.O.D. Center Section 07-18 Wrangler JK Black Textured Smittybilt – 76825
The all new JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The base unit was developed around our XRC platform and comes standard with a winch cradle with capacity to support up to a 15,000lb. winch. Its also equipped with D-Ring mounts that are welded on the inside and out that provides a towable anchor when pulling your rig behind a truck or motor home. Choose between our Mid or Full Width End Plate knowing that bumper clearance won Foott be sacrificed when wheeling in the harshest conditions. Then decide which over rider you prefer, you can choose between our low profile bull bar or our high point stinger.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black powder coat finish
- Built-in winch plate to accommodate up to a 15k winch
- Manufactured from 3/16 cold rolled steel
- Solid mount d-rings Weld on the inside and out
SKU: n/a -
-
Bumper End Cap
XRC M.O.D. Full Width End Plate 07-18 Wrangler JK Smittybilt – 76818
The all new JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The base unit was developed around our XRC platform and comes standard with a winch cradle with capacity to support up to a 15,000lb. winch. Its also equipped with D-Ring mounts that are welded on the inside and out that provides a towable anchor when pulling your rig behind a truck or motor home.
Choose between our Mid or Full Width End Plate knowing that bumper clearance won Foott be sacrificed when wheeling in the harshest conditions. Then decide which over rider you prefer, you can choose between our low profile bull bar or our high point stinger.
Details:- Fits 2007 to 2018 Jeep JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Two stage textured matte black finish
- powder coat finish
- Marine grade stainless steel hardware
SKU: n/a